Lyon Beton Edge DL-09035WR User manual

N°. 001-50/2012
12
6
39
30 min
D-09035WR STOOL WITH ROPE
Dimensions : L40 x H45 x D40 cm


Read the instructions carefully before assembly.
Identify the dierent parts of the product. Group and check the hardware ttings.
Get the necessary tools and keep the area clear before you begin assembly.
The assembly should be carried out by a qualied person because wrong assembly may lead to that the
furniture topples or falls resulting in personal injury or damage.
Proceed to assemble. Never force the ttings.
Re-tighten the screws after some time of usage.
Keep these assembly instructions for future reference. They could facilitate communication with your store or
dealer, in the event of any query.
GENERAL COMMENTS
The article that you have just acquired is hand-crafted.
It is made from lightened brous concrete (less than 2 tonnes per m3) reinforced with a steel frame structure. It
is composed of natural materials (cement, sand, water, steel, and bres), and is hand-made.
The pores, microssures and possible variations in colour are inherent characteristics of the material used and
evidence of handicraft, which give this furniture its unique appearance and charm. For these reasons, this
article cannot be returned or exchanged.
DISTINCTIVE FEATURES
MAINTENANCE AND CARE
Do not stand Do not kick
Do not knock or shake.
Do not throw objects
(e.g. keys, kitchen tools)
Do not leave spills unattended.
Immediately clean colored stains (such as red wine, oil, tea and coee) with a wet sponge and soap.
Never use abrasive products, strong acid detergents, bleaching agents, metal brushes, or high-pressure
cleaners. Preferably use a soft clean dry cloth.
For good protection, apply wax or stone preserve products regularly.
Check the tightness of all screws and bolt connections regularly.
Shelter from the elements. During winter, we advise you to keep the article in a dry place after it has been
cleaned, aired and dried. You could also cover it with a protective cover .

Never move your product by pushing or pulling it.
You may seriously damage it.
THE PRODUCT SHOULD BE RAISED
FROM THE LARGE SIDE BY 2 PEOPLE
Avoid all actions which could scratch or damage the concrete.
If needed to use abrasive objects such as ashtrays, dishes,
decoration items, bottles, etc.please use a placemat or a table cloth.

EXPLODED VIEW / HARDWARE
STEP #01
2
1
TO AVOID ANY RISK OF DAMAGE,
Before assembling your product,
put the cardboard you just removed
from the packing on the oor.
Then put the base on top of this cardboard.
You can then assemble the product.
x 4A
x 16B
2
A
A
A
2
1
2

STEP #02
LAST STEP
x 4A
x 16B
A
A
A
A