LyxPro LYXBWR7 User manual

BLUETOOTH®AUDIO
TRANSMITTER
User Guide
LYXBWR7
Thank you for purchasing the LyxPro Bluetooth® audio transmitter. This User Guide is intended
to provide you with guidelines to ensure that operation of this product is safe and does not pose
risk to the user. Any use that does not conform to the guidelines described in this User Guide
may void the limited warranty.
For the safe and correct use of this product, please read this guide before using the product and
keep these instructions for reference.

Overview
Instantly add Bluetooth functionality to non-Bluetooth devices. The LyxPro Bluetooth
transmitter is compatible with most devices having a 3.5mm aux. output. It broadcasts
high-quality stereo sound from your computer, laptop, music player, TV, mic, and other
devices to your Bluetooth-enabled headphones, speaker, or audio system. Listen to music,
TV, movies, or games via Bluetooth headphones without disturbing others and without
wires restricting your movements.
Package Contents:
LyxPro Bluetooth transmitter
USB charging cable
User guide
Multifunction
button
LED indicator
USB port
3.5mm plug
2

Safety Precautions
Please read this user guide carefully and follow all instructions. Retain this guide for
future reference.
• Be careful not to drop the device. Damage may occur.
• Keep device away from humidity, water and any other liquid. If the device is exposed to water
or other liquids or high moisture, do not operate it to avoid any electrical shock, explosion,
damage to the device, or injury to yourself.
• Do not place or keep this device in direct sunlight or near any heat sources such as radiators,
stoves or other equipment that produces heat. This may cause an explosion, degrade product
performance and/or reduce battery life.
• Do not modify, repair or disassemble device. Doing this will void the warranty.
• Do not place heavy objects on the device.
• Please contact the retailer for replacement or support for this product.
• Unplug this device when unused for long periods of time or during lightning storms.
• The battery used in this device may present a risk of re or chemical burn if mistreated.
Battery Information
This device is equipped with an integrated lithium-polymer battery. The battery cannot be
replaced. Do not attempt to remove the battery from the device. Damage could occur. The
battery can be charged and discharged several hundred times, but it loses its capacity o
ver time.
Important:
If the transmitter is not used for a long period of time, make sure that the battery is fully
charged before using the device again. To avoid a complete discharge of the battery, charge it
at least every 6 months.
3

Charging the Battery
Charge the battery completely before rst using the product.
1. Connect the charging cable to the USB port on the transmitter.
2. Connect the other end of the cable to a USB power supply such as a computer or
charging adapter.
3. The red indicator light will turn on while the charger is connected. Charging the battery
fully may take up to 2 hours.
4. The red indicator light will turn blue when the battery is fully charged. Disconnect the
charger from the device and the power supply.
NOTE:
• The fully charged battery provides power for up to 6 hours of play time. Play times may
vary according to dierent Bluetooth devices, usage settings, usage styles, and environments.
• When the battery power is low, the red indicator light will ash.
Pairing
Pairing is required only for the rst connection to a new earphone or speaker or other
audio device.
To pair a device to this receiver requires that the device supports the A2DP Bluetooth prole.
Attaching this transmitter to a phone, music player, computer or other audio source requires
that the device has a 3.5mm jack.
1. Turn on the paring mode on your Bluetooth-enabled listening device. Make sure that the
Bluetooth transmitter is located within 3 feet of the device.
2. Press and hold the transmitter's multifunction button for 5 seconds to enter the search
mode. The LED indicator will ash red and blue.
4

3. The pairing process may take around 20 – 30 seconds. The indicator will ash blue when
pairing is successfully completed.
4. The transmitter is now ready to use. Connect the audio cable to the audio jack of the
source device.
NOTE: If pairing is not completed within 5 minutes, the LED indicator will turn o. If this
happens, repeat the pairing process.
Operation
TURNING ON AND OFF
Press and hold multifunction button for 3 seconds.
CONNECTING TO HEADPHONES OR SPEAKER
If the transmitter has previously been paired to headphones, a speaker, or other listening
device, when you next turn it on it will automatically reconnect to the last device used.
TURNING OFF
Press and hold multifunction button for 5 seconds. The indicator light will ash red 3 times
and the unit will power o.
Specications:
Bluetooth version: V3.0
Operating frequency: 2.402 – 2.48GHz
Operating range: up to 30 ft. (10m)
Supported prole; A2DP
Power input: DC 5V/USB
Audio input port: 3.5mm 1/8" jack
Dimensions: approx. 1 3/4” x 1”x 1/2” (40 x 25 x 11mm)
Customer Service:
[e-mail] | 866-849-3049
Distributed by
C&A Marketing, Inc.
114 Tived Lane East
Edison, NJ 08837 USA
C&A Marketing UK LTD
167 Hermitage Road
Crusader Industrial Estate
London N4 1LZ
United Kingdom
www.lyxpro.com
[e-mail]
MADE IN CHINA
LyxPro is a trademark of
C&A IP Holdings, LLC
©2016 All Rights Reserved
5