M-Spa DELIGHT BUBBLE Spa User manual

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 1 -
After-sale Service Manual
DELIGHT BUBBLE Spa
(EU,UK,SW)
Oriental Recreational Products (Shanghai) Co., Ltd.

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 2 -
Table of Contents

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 3 -
Chapter 1 After-Sale Service Center Operation and Warranty Policy
1.1 After-sales Service Center Set-up
ORPC authorizes after-sale service center in each specified country, region or territory. ORPC requests its service
center have necessary staff, equipments and facilities to ensure effective, professional and cost-saving warranty
services provided to MSpa customers. The service center must be eligible for the following requirements:
1.1.1 Have a service telephone or hotline number for customers to call for warranty services or product related
inquiries. The service number must keep in service during work days and normal business hours.
1.1.2 The service center must have dedicated staff - customer service representatives or technical personal to
answer phone calls, product inquiries or any other warranty related questions.
1.1.3 Provide a proper sized warehouse to store MSpa spare parts and returned defective parts from customers.
1.1.4 Have a workshop to test and repair defective spas that defects cannot be solved by telephone service.
Repair service must be under valid warranty period.
1.1.5 Have necessary equipments or tools for service engineer to carry out the warranty services efficiently.
1.1.6 Set up service procedures to guide and monitor service staffs’ daily service activities, include answering
customers’ phone calls, providing the service, recording service details, and filling in the service report.
1.2 Obligations of the After-sale Service Center
As an ORPC authorized After-sales service center, it is responsible to take care of all after-sales service related jobs
for MSpa customers in the specific territory at its own cost:
1.2.1 Listen and answer customers’ phone calls, inquiries, or warranty claims in a timely, polite and professional
way
1.2.2 Verify warranty claims; decide if it’s valid or invalid according to the warranty policy by ORPC.
1.2.3 Provide technical services by phone to solve simple warranty issues that are not required of returning
product for testing and repair.
1.2.4 Test and repair the returned warranty spa products and ship back or return the repaired units.
1.2.5 Deliver replacement spare parts to customer if the spa is under warranty, and if customers are willing and
capable of repairing the spa by themselves.
1.2.6 Record and summary service details by filling in the service report. ORPC requires after service center to
submit the summary reports regularly for technical analysis and warranty re-verification purposes. The
service report should include the following:
Model Number
Serial Number
Customer Name & Contact Information
Purchase Date
Claim Date
Defect Description

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 4 -
Defective Part Name
Repaired or Replaced Part Name and Quantity
Warranty Service Period
Photocopy of Customers’ Purchase Invoice
Photo of Defective Spa/Part etc.
1.2.7 For any serious quality problems or special warranty issues, the after-service center MUST report to ORPC
for approval or confirmation.
1.2.8 Manage spare parts inventory effectively, do stock checking regularly and submit the stock inventory
list/Consumption report to ORPC monthly.
1.2.9 Mspa service partner/distributor shall prepare monthly warranty service report in ORPC’s template and submit to
OPRC’s after-sale service department on every second Monday of the following month.
1.3 ORPC Warranty Policy
ORPC provides warranty for MSpa bubble spa products against defects in materials or workmanship under proper
usage and maintenance.
1.3.1 Warranty for Distributors/Importers
MSpa distributors and importers are entitled to manufacturer's warranty from the date of product arrival at the
destination port. ORPC/MSpa is only responsible for providing parts, but not services or any labor costs.
Warranty Items:
Mspa Model:D-AL04/06,D-NE02,D-SC04/06,D-TE06,D-AU04/06, D-CA04/06, D-ST04
Warranty Period:
Nine(9) months ( including three(3) months of storage period ) for the Delight series spa pool
Fifteen (15) months ( including three(3) months of storage period ) for the electric part
Six(6) months ( including three(3) months of storage period ) for other spa components like inflatable
bladder, spa cover, and other non-electric part
Warranty Starting Date: MSpa distributor/importer warranty starts from the product arrival date at the destination.
1.3.2 Warranty for Consumers
Consumer is entitled to standard consumer warranty from the date of purchase. During the standard consumer
warranty, ORPC/MSpa will only provide parts to carry out the warranty repair. The distributor/importer is responsible
for all the other costs, including but not limited to labor cost, shipping, and other service related cost. Under all
circumstances, it is the importer/distributor’s responsibilities to honor the consumer warranty.
Warranty Items: Inflatable Spas
Standard Consumer Warranty Period:
Six(6) months for the delight series spa pool
Twelve(12) months for the electric part
Six(6) months for other spa components like inflatable bladder, spa cover, and other non-electric part
Warranty Starting Date: End customer warranty starts from the date of purchase. Standard consumer warranty

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 5 -
apply ONLY to the original MSpa owners.
1.4 ORPC Warranty Obligations to Distributors/Importers
As manufacturer, ORPC provides sufficient support to the authorized after-sale service center to carry out the warranty
service by the following activities:
1.4.1 Provide free spare part to the after-sale service center for valid distributor warranty claims.
1.4.2 Provide and update the service manual and other technical documents regularly. Provide training on warranty
policies, procedures and other technical service issues.
1.4.3 Provide daily technical support to solve warranty problems effectively and smoothly through email or phone
calls.
1.4.4 Provide technical service training at Shanghai headquarter upon after-sale service center’s requests.
1.4.5 Collect, summarize and analyze the regional/territory service reports for future improvements in regards to
product quality or service.
Chapter 2. Important Information and Tips for Using Spa Products
2.1 Heating Effect -Temperature Increasing Rate or Speed
For 220-240V 50Hz Spa (EU Standard)
For 2-4 person bubble spa, the heat increasing rate is about 1.5-2.5 ℃/hour. To get a better heat increasing result, put
on spa inflatable bladder and top lid.
For 6-person bubble spa, since the water capacity is bigger, the heat increasing rate is lower at 1.2-1.8 ℃/hour.
Heat Preservation Mat is helpful to reduce heat loss from bottom and it provides better heat insulation results together
with the inflatable bladder in use. It is recommended to have the MSpa heat preservation mats in between the spa and
ground. Consumer can also apply similar mat which is made of foam material or other material with heat insulation
function.
It’s only possible to set up and leave the spa at an outside temperature lower than 4°C as long as the spa has a
constant water temperature guaranteed at above 4°C. The spa can be used under low-temperature
environment and temperature down to maximum -10°C ONLY if it is set up properly to ensure no frozen water
inside control box, pipes or spa pool.
2.2 Filter Cartridge
MSpa filter cartridge – Item No. B0302860 120 pleats is suitable for all Mspa delight models.
Item No. B0302949 90 pleats with new B0302950 cartridge base is suitable for all Mspa delight models.

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 6 -
2.3 Inflate and Deflate the Spa to Avoid Air Leakage
Note:
Check before inflation whether the manometer cap is screwed up tight on the valve of pool
body. If not, please tighten and then inflate. After inflation, the manometer cannot be removed,
otherwise air will be released.
When the Yellow section is pushed out, the Spa inflation is completed. You can fill the Spa with water.
After water filling is completed. Check air pressure once again to ensure the manometer reaches
Green section. Always ensure the manometer is on Green section at use.
If the White section of the manometer appears, the spa is over inflated. Rotate the valve cap counter
clockwise, have the air released till the Green section is pushed out, then tighten it clockwise.
To avoid over inflation caused by warm weather or sunshine when leaving spa for weeks inflated and
filled with water in temperature higher than 20°C (68°F), please release some air to make sure the
manometer is always on Yellow section.
Spa Deflation
1. Unscrew the manometer cap on the spa pool to deflate the spa.
2. Once the deflation is completed, screw the cap back.
2.4 Avoid Air Leakage from Spa Liner Split or Tiny Holes Due to Over-inflation (For Delight
series only)
2.5 Try to Repair the Tiny Holes or Split on Spa Liner Instead of Replacing a New Spa Liner
For pool liner air leakage caused by tiny holes or splits, it is suggested to first try to repair with glue and PVC
swatches provided in the repair kit. You can also order repair swatches from the spare part list.
With the repair material, most pin holes and splits can be repaired easily within 10 minutes.
Spa Tub and Air Bladder Repair
Use the enclosed repair patch to repair any puncture:
1. Clean and dry the area to be repaired thoroughly
Ensure to ask customers to test the spa pool air pressure with manometer. Testing air pressure
is very critical during the installation process, because any air leakage, pool liner splits due to
over inflation are not covered by the ORPC/MSpa warranty. It is important to advise customers
to watch the MSpa DVD or follow the instruction manual carefully to check and test the air
pressure every single time before inflating or using the spa.

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 7 -
2. Apply the glue to the PVC patch and quickly attach it onto the damaged surface
3. Smooth the surface to remove any air bubbles and allow it dry for 5-10 minutes
NOTE: Glue is not included. Aquaseal & Stormsure glue is recommended for PVC inflatable items.
Glue physical and technical information:
2.6 Using Spa in the Cold Weather
It’s only possible to set up and leave the spa in the environment of outside temperature of less than 4°C as long as the
spa has a constant water temperature guaranteed over 4°C. Spa can only be used for temperature down to maximum
-10°C if it is properly set up to make sure no frozen water inside control box, pipes and spa pool.
Optional accessories:
B9300109N/B9300492N Heat Preservation Mat is helpful to avoid heat loss from bottom and it
provides better heat insulation results.
Inflatable bladder provides better heat preservation and rain outflow.
2.7 Temperature issue
If customer asks about temperature display on the control panel cannot reach to the set temperature of 40℃
(Maximum) and it indicates 38℃, 39℃, 40℃and 41℃, we may explain to the consumer that it is normal to show a
minor difference from the actual temperature to the rate displays on the control panel. It’s normal with a 1-2℃gap.
2.8 Broken zipper issue
Regarding broken zipper complaint, first check if the air pressure is within the normal range. Over-inflated spa liner
could damage the spa cover zipper.
A replaced top lid may not 100% fit onto the spa pool. 3-4cm (1-2”) difference is common. Because there might be a
little zipper length difference between the new top lid or spa liner and the used ones. To avoid zipper claim, please
recommend the customer to maintain the zipper by waxing it regularly.
In case of broken zipper on liners, we’d suggest the new buckle cover with ground mat for service support:

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 8 -
B9301427: Buckle cover with ground mat for 4 person zipper lid service(M-011LS/D-SC04/D-ST04/P-MB04/D-AU04)
B9301428: Buckle cover with ground mat for 6 person zipper lid service (M-021LS/D-SC06/P-MB06/D-AU06)
2.9 Water treatment
The Spa owner must regularly check and keep the spa water santitized with scheduled maintenance(daily, if
necessary). Adding sanitizer and other chemical will control bacteria and viruses present in the spa water. The
maintenance of a proper water balance through appropriate use of sanitizers is the single most important factor in
maximizing the life and appearance of the spa tub as well as ensuring clean, healthy and safe water. Proper
technique is important for water testing and treating the spa water. See your pool/spa professional for chemical,
sanitizer, test kits and testing procedures questions.
Warning
• Never mix chemicals together. Add the chemicals to the spa water separately. Thoroughly dissolve each
chemical before adding one to the water.
• Bromine is highly recommended for good water quality.
• Please note that chlorine and bromine products should never be mixed. This is extremely dangerous. If you
usually use chlorine-based products and you want to switch to bromine-based products, or vice versa, it is
mandatory to completely change the spa water before any product changes.
• Do not over use the chemicals, otherwise there will be strong chemical odor and potential hazard to your skin
HTH BROMINE Information
Characteristics:

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 9 -
The use of bromine is particularly recommended in spas and heated waters over 27°C. It remains disinfectant even
at high PH. of the original product (sodium bromide), Bromine takes its disinfecting action but also its
non-aggressive properties. Has no odor, stings neither the eyes, nor the skin and does not bleach the hair.
• 20g tablet with slow dissolution, no residue
• Active ingredient content (BCDMH) greater than 96%
• Excellent disinfectant activity, regardless of the ph of the treated water (98% at ph 7.0 and still 75% at ph 8.2)
Safety with chemicals
Properly handled and used, the chemicals used in the maintenance of your spa are perfectly safe and harmless. If
you use them inappropriately or do not follow the instructions on the package, the consequences can be severe.
Here are some simple rules to always keep in mind:
• Keep chemicals in their original packaging. All products in the HTH Spa range are sold in one-certified packaging.
• Keep chemicals in their closed packaging when not in use.
• Keep all chemicals out of the reach of children.
• Never mix chemicals with each other. When you mix them with water, always add the products to the water, not
the water to the products.
• Store your hth SPA chemicals by following the instructions on the package.
• If you accidentally spill a product, clean immediately. If it is a solid product, use a shovel and a brush, and add it to
your spa in small quantities at a time.
Do not put the products back in their original packaging and do not use a household vacuum cleaner.
Bromine Kit
Bromine spa treatment kit. The essential kit for your spa water maintenance.
Includes:
•1kg OVY Spa Bromine 20g Tablets
•1kg OVY Spa Bromine Shock powder
•1.5kg OVY Spa pH-minus powder
•1L OVY Spa Anti algae liquid
•50 Bromine strips: Aquacheck
1 measuring cap

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 10 -
Mspa clean
Spatime range by Bayrol The Spatime water line cleaner is ideal to easily clean the inside of the spa and eliminate
the impurities and the greasy sediments. Condensed liquid cleaner
- how much liquid chlorine should be filled into the pool? No liquid chlorine in an inflatable spa
- how often should be filled in liquid chlorine? No liquid chlorine in an inflatable spa
- how often should be put new water into the pool if customer use NO liquid chlorine? It depends on how many
times / week they go into the spa. In peak season when they use spa every day, I suggest to change water every
month
- how often should be put new water into the pool if customer use liquid chlorine? No liquid chlorine in an inflatable
spa
- if customer put in liquid chlorine, should the whirlpool be ON, so that chlorine can be better distribute? If yes, how
long should the whirlpool be ON?No liquid chlorine in an inflatable spa
Liquid Chlorine is too aggressive for pvc pool, we strongly recommend to use bromine tabs for water sanitizing
2.10 Where to find Mspa serial number?
On the bottom of control box or back of the wired controller panel near the rating label.

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 11 -
2.11 How is Anti-icing System working for 2020 new spas?
In most occasions, it is not suggested to leave or set up the spa when the outdoor temperature is below 4°
C(39.2° F).
The brand new Anti-icing System will be the watcher of your spa, to guard the temperature safe line. When the
water temperature is lower than 1° C(33.8° F), the heater runs automatically until the water is heated up to 3°
C(37.4° F). This will help prevent water from freezing. The circulation system, pump and pipe will be saved.
It activates automatically if SPA is plugged with the power source and “reset” button is pressed on PRCD.
Chapter 3. MSpa Assembly, Wire Diagram & Major Electric Parts
3.1 MSpa Assembly
Reference
(Part No. on
exploded view)
Component
description
Quantity
(Qty. used
on product)
Material
1-83
Electric cabinet
1
Metal parts+ Silicone parts + plastic parts
84
Drainage adaptor
1
Grey PVC
85
PE pipe
1
Black PE
86
Connection ring
1
Grey PVC
87
Outlet connection
1
Grey ABS
88
Water seal
1
White silicone 45-55A
89
Drain cap
1
Grey ABS
90
Water inlet
1
ABS,PP+30%GF+CU
91
Water outlet
1
ABS,PP+30%GF+CU
92
Pool liner + cover lid
1
PVC
93
Valve cap
1
Black PVC
94
Manometer
1
ABS

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 12 -
Reference
(Part No. on
exploded view)
Component
description
Quantity
(Qty. used
on product)
Material
1
Shell of cabinet
1
ABS
2,8,9
Base+ Dust-proof sponge+inlet
cover
1
ABS
3
Decorative ring
1
ABS
4
Foam of cabinet
1
EPS
5
Top cover
1
ABS
6
Rear cover
1
ABS
7
Transformer
1
AC230-240V/36VA,Output:AC12V
10-23
Checking valve
1
ABS+ silicon gel+metal
24
silicone tube
1
silicon gel
45-55A

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 13 -
25
The metal band
ψ30-45
2
SUS304
26
PE air pipe
1
PE
27
PE pressing buckle of air pipe
1
ABS
28
Motor outlet seal ring
1
silicon gel
45-55A
29-32,39,40-45
PTC heating element
1
AC230V/1500W
33
Screw M4*60
4
SPCC,
34
Water pipe
1
silicon gel
45-55A
35
The metal band
ψ
30-45
2
SUS304
36
Sealed ring for inlet/outlet
2
silicon gel
45-55A
37
PTC Support frame
2
PA66+30%GF
38
PTC fix mount
1
PA66+30%GF
46
Filter pump
1
AC12V/35W
47
Filter inlet pipe
1
PA66+30%GF
48
Upper nut
2
ABS
49
Under nut
2
ABS
50
PVC Inflatable mouth gasket
2
silicon gel
45-55A
51
Motor cabinet
1
ABS
52
Built-in noise reduction sponge
1
P18
53
Air pump motor stand
1
PA66+30%GF
54
Motor cushion
1
silicon gel
55
Bubble motor
1
AC230V/600W
56
Motor cushion
1
silicon gel
57
Motor seal 1
silicon gel
45-55A
58-60
Top cover of motor
1
ABS etc
61
Checking valve
1
ABS+PVC
62
rotary switch
1
ABS
63
Knob ring
1
ABS
64
The lid switch
1
ABS
65
Screw M5*15
1
SUS304
66
The mainboard under cover
1
ABS
67
The mainboard upper cover
1
ABS
68
Power board
1
fiberglass
，
94V0 t1.6
69
Ground terminal
1
SUS304
70
Line pressing gate
1
PA6
71
Plug+PRCD+power cable
H07BQ-F,3*1.0MM2
1
Rubber+copper+PC
72
Screw ST3*15
4
73
Screw ST3*10
56
45#,
74
Screw ST4*18
35
SPCC,
75
Screw ST3*8
14
45#,
76
Panel sticker
1
PET
，
77
Round button in the panel
4
transparent silicone 45-55A
78
Semicircle button in the panel
2
transparent silicone 45-55A
79
Panel front shell
1
Golden ABS
80
PCBA in the display
1
fiberglass
，
94V0 t1.6
81
Sealed ring in the display
1
Black silicone 45-55A
82
4-pin signal cord
1
PVC+copper
83
Under shell of the panel
1
Black ABS

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 14 -
3.2 MSpa Major Electric Parts
Control panel PCB
Power board PCB
Transformer
Filter pump
Bubble Generator
PTC heater

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 15 -
3.3 Wiring Diagram

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 16 -
Chapter 4 How to Replace Mspa Parts
4.1 Power Board Assembly and Wire Terminal Connection
4.2How to replace control box (B9301280/B9301398)
1. Empty water in the spa pool and deflate the spa and
then screw off water inlet and outlet fittings with a
plastic wrench that was supplied in the spa package
；
2. Remove the knob switch (as shown in the video)
1
2
1
Transformer-
blue wire
Bubble-
blue wire
Heating
circuit-black
Power supply
blue
BUBBLE
brown
Transformer
brown
Power supply
- brown
Heater double
circuit(white）
Flow switch
leads，two
insertions (big)
Temperature
sensor insertion
(small)
4-pin data cable
insertion
Flow switch
leads，two
insertions (big)
Micro
switch
insertions

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 17 -
3. Unscrew the PE air pipe and check valve’s
connection plastic nut (as shown in the video)
4. Take out the control box from the pool liner; pull out
the smart control panel from the hole of pool liner.
5. Dissemble the plug and upper foam from the original
control box, then mount to the new replaced control box.
6. Assemble back new replaced control box into pool
liner in reverse order.
4.3Replace the bubble generator(B9300679)
1. Take out the control box
2. Loosen four screws (ST4*60) from the bottom of the
cabinet
2
3
4

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 18 -
3. Loosen five screws(ST4*15) from the rear cover
of the cabinet; Loosen two screws (ST4*15) from the
bottom of the cabinet
4. Take out the internal cabinet and power board
5. Loosen screws and dissemble the top cover from
the bubble generator
6. Remove the connection of leading wire and take out
the bubble generator
7. Put into the new bubble generator; assemble the
heat shirnkable sleeving; connect the leading wire
from the bubble generator and power cable.
8. Connect the transparent protective suit on the lead to
the joint，assemble the heat shirnkable sleeving; Tie
binding after fusing shrinkage
9、Assemble the control box in reverse order.
4.4 How to replace heating element(B9301193)
1、Take out the control box
2
、
Loosen four screws (ST4*60) from the bottom of the
cabinet

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 19 -
3、Loosen five screws (ST4*15) from the rear cover
of the cabinet; Loosen two screws (ST4*15) from the
bottom of the cabinet
4、Take out the internal cabinet and power board；
5
、
Loosen three screws from the fixed junction box;
disassemble 3 sets black pin-cable
；
6
、
Remove 4 screws and open the wire connection box;
cut off the bindings and take out the 2 heating wires ,
7、Loosen 6 screws from the filter pump
8、Loosen 1 screw from the bubble generator to PTC
heater; 2 screws from the fixed mount; 2 screws from the
outlet of PTC heater
10、Use cross screwdriver to disassemble the 2
heating earth wire
11
、
Take out the PTC heating element and filter pump;
disassemble the metal band from outlet of filter pump.

2019-2020 Delight Service Manual
Visit our website at: www.the-mspa.com
- 20 -
12、Assemble the new PTC heater back into the control box in reverse order. (Video available)
4.5 How to replace transformer (B9300680)
1、Take out the control box；
2
、
Loosen four screws(ST4*60) from the bottom of the
cabinet
3、Loosen five screws (ST4*15) from the rear cover
of the cabinet; Loosen two screws (ST4*15) from the
base of the cabinet
4、Take out the internal cabinet and power board；
5
、
Loosen three screws from the fixed junction box;
disassemble 3 sets black pin-cable
；；
6、Remove 4 screws and open the power board; cut off
the bindings and take out the 2 lead wires for transformer
6、Loosen 4 screws from the filter pump
8
、
Loosen the plastic connection nut from inlet and filter
pump
；