Macally MWATCHSTAND3 User manual

User guide
MWATCHSTAND3
3-in-1 Apple® Charging Stand

About this guide
Introduction
Before you start using the Macally MWATCHSTAND3,
be sure to read this guide in its entirety.
Package contents
• MWATCHSTAND3
• Spacer accessories
• Adhesive pads
• Cable organizer
• User's guide
*Charging cables not included
Hardware basics
Thank you for purchasing the Macally
MWATCHSTAND3. The Macally MWATCHSTAND3
is a stylish and sturdy stand, specially designed to
keep your Apple iPhone®, Apple Watch®,
AirPods® and charging cables together to help
keep your desk/nightstand clean.
Important notes
Installation instructions
• This product only works with original Apple
branded Lightning cables and Apple Watch
magnetic chargers.
• Apple iPhone, Watch, AirPods, magnetic charger
and Lightning cables are not included.
• The iPhone stand does not work with cases that
are equipped with bottom plugs that cover the
lightning port of the phone.
APPLE WATCH
1. Insert the Apple Watch charger into the circle
cut-out and push the magnetic charger into place.
2. Run the cable through the back charger cut-out
and run the cable through the cable channel. Then
place the cable plug into the cable opening.
Apple Watch
magnetic
charger cut-out
AirPods
Lightning
cable cut-out
iPhone
Lightning
cable
cut-out
iPhone spacer slots
Back cable channel
FRONT
BACK
BOTTOM
Bottom cable
channels
Cutout for IWatch
charger cable
iPhone Spacers
Cable plug
AirPod spacer
Adhesive pad (4)
Cable organizer
1
2
3
4
5
1
2
3
4
5
1 2
1
2
3

3. Connect the Apple Watch magnetic charger to a
USB power adapter (not included) and place your
Apple Watch on the charger to charge it.
AIRPODS
1. Pull the Lightning connector upward from the
bottom opening.
iPHONE
Note: The spacers included in this package are to
help accommodate various case thicknesses. After
running the cable place your phone onto the
lightning connector and see which spacer best fits
your case.
1. Pull the Lightning connector upward from the
bottom opening.
2. Pull the connector to the right, push it
downwards and run the cable through the bottom
cable channel.
3. Connect the Lightning cable to a USB power
adapter (not included) and place your AirPods onto
the Lightning connector.
NOTE: AirPod Pro users that have a "C-to-lightning
cable" will need to use the AirPods spacer to help
keep it levelled.
1
1 2
2
3
USB-A to Lightning: Spacer is not needed.
USB-C to Lightning: Use the spacer.

Technical support
Please E-mail us at [email protected],
or call us at 1-909-230-6888 Monday to Friday,
8:30AM to 5:30PM, Pacific Standard Time
FAQ & help - https://help.macally.com/help
Manual and driver download -
https://us.macally.com/pages/drivers-and-downloads
Warranty
Macally Peripherals warrants that this product will be free from
defects in title, materials and manufacturing workmanship for one
year in North America. If the product is found to be defective then,
as your sole remedy and as the manufacturer’s only obligation,
Macally will repair or replace the product. This warranty is
exclusive and is limited to the Macally MWATCHSTAND3. This
warranty shall not apply to products that have been subjected to
abuse, misuse,abnormal electrical or environmental conditions, or
any condition other than what can be considered normal use. The
liability of Macally Peripherals arising from this warranty and sale
shall be limited to a refund of the purchase price. In no event shall
Macally Peripherals be liable for costs of procurement of substitute
products or services, or for any lost prots, or for any consequential,
incidental, direct or indirect damages, however caused and on any
theory of liability, arising from this warranty and sale. These
limitations shall apply notwithstanding any failure of essential
purpose of any limited remedy.
ADHESIVE PADS
We've included 4 double sided adhesive pads to
help create a firm hold onto your desk/nightstand.
To use them simply remove the paper backing of
each pad and apply them in-between the arrows
located under the stand.
CABLE ORGANIZER
To use the cable organizer simply run the cables
through the spiral cable wrap to help keep your
cables clean and organized.
2. Pull the connector to the right, push it
downwards and run the cable through the bottom
cable channel.
3. Connect the Lightning cable to a USB power
adapter (not included) and place your iPhone onto
the Lightning connector to charge.
1
2
3