Macally LAMPCHARGESQ User manual
LAMPCHARGESQ
User guide
NIGHTSTAND LED LIGHT
WITH USB CHARGER
USER GUIDE
About this guide
Before you start using the Macally LAMPCHARGESQ,
be sure to read this guide in its entirety.
Package contents
• LAMPCHARGESQ
• User guide
Hardware basics
Installation instructions
Safety intructions
Thank you for purchasing the Macally
LAMPCHARGESQ. The LAMPCHARGESQ is a LED
light charging station with a stylish wood effect
bottom finish. The built in LED light is touch
controlled and offers a warm soft white light
(2700K) -convenient for reading- and three stages
of brightness (Dim, Mid and Bright). The 4 USB
ports with Smart IC (5V/4.8A) allow you to quickly
and efficiently charge your smartphone, tablet or
any other USB powered device. Fully certified, it
keeps your light and devices safe with surge
protection, temperature control, short-circuit
protection and over-current protection. The Macally
LAMPCHARGESQ is the perfect LED light charging
station to put on a nightstand in your bedroom, a
side table or side board in the living room or on a
desk in your study or office.
Please read the following carefully before using this
Macally product. Incorrect use of this product may
result in reduced performance, permanent
damage and void warranty:
1. Do not place this product near a heat source.
2. Operating temperature of 5°C to 40°C. Storage
temperature of 0°C to 60°C.
3. Do not place this product near moisture nor
liquids.
4. Operate and store at humidity of 5% to 90%
(non-condensing)
5. Do not place heavy objects on this product.
6. Do not drop this product.
7. Do not dispose this product in the garbage. Take
it to your local recycling centre.
Plug the AC power cable into your wall outlet and
place it on top of your table, desk, etc.
Tap the touch control ring to turn the LED on and to
cycle through the 3 LED brightness levels. You can
also tap-and-hold it to turn it off and preserve the
current brightness level for the next time it’s turned
on.
6 ft/180 cm AC power cable
Touch Control
USB Ports
Cable holder
Copyright © 2019 Macally Peripherals
Technical support
Warranty
Macally Peripherals warrants that this product will be free from defects
in title, materials and manufacturing workmanship for one year in
North America from the date of the purchase. If the product is found to
be defective then, as your sole remedy and as the manufacturer’s only
obligation, Macally will repair or replace the product. This warranty is
exclusive and is limited to the Macally LAMPCHARGESQ. This warranty
shall not apply to products that have been subjected to abuse,
suse,abnormal electrical or environmental conditions, or any condition
other than what can be considered normal use. The liability of Macally
Peripherals arising from this warranty and sale shall be limited to a
refund of the purchase price. In no event shall Macally Peripherals be
liable for costs of procurement of substitute products or services, or for
any lost prots, or for any consequential, incidental, direct or indirect
damages, however caused and on any theory of liability, arising from
this warranty and sale. These limitations shall apply notwithstanding
any failure of essential purpose of any limited remedy.
For tech support please call +1 909 230 6888 or
support hours are from 8:30 AM to 5:30 PM
Monday through Friday (Pacific Standard Time).
To charge your smartphone or tablet, simply
connect the devices USB cable to any of the side
USB ports on the LAMPCHARGEGQ.
Other manuals for LAMPCHARGESQ
1
Other Macally Work Light manuals
