MACCHIAVALLEY Tasman-Denali Guide

LB. 00151-00-GB Pag. 102/08/06
INSTALLATION AND USE MANUAL
-AT-MEGA 256 -
GB ENGLISH
LB.00151.00.GB
EDITION July 2006

LB. 00151-00-GB Pag. 202/08/06
TABLE OF CONTENTS
INTRODUCTION AND GENERAL INSTRUCTIONS ..............................................................................................................................3
INSTRUCTIONS FOR INSTALLATION..................................................................................................................................................3
SPECIAL INSTRUCTIONS FOR USE AND MAINTENANCE................................................................................................................ 3
MACHINE KEYPAD................................................................................................................................................................................4
ELECTRIC -HYDRAULIC CONNECTION .............................................................................................................................................5
STARTING UP ........................................................................................................................................................................................6
COFFEE, CAPPUCCINO, MILK DISPENSING......................................................................................................................................9
SHIFT DISPENSING.............................................................................................................................................................................11
CONTINUOUS DISPENSING WITH BUTTO N°17...............................................................................................................................12
DECAFFEINATED CYCLE...................................................................................................................................................................12
HOT WATER DISPENSING..................................................................................................................................................................13
EXTRA FOAMED MILK FUNCTION....................................................................................................................................................13
STEAM DISPENSING...........................................................................................................................................................................13
SYSTEM CLOCK PROGRAMMING.....................................................................................................................................................13
SYSTEM CLOCK PROGRAMMING.....................................................................................................................................................14
AUTOMATIC RINSING CYCLE............................................................................................................................................................15
CLEANING OF COFFEE GROUP, MILK FROTHER AND EMPTYING BIN........................................................................................15
ACCESS THE MAIN SETTING MENUS WITH PASSWORD OR SMART-CARD...............................................................................16
KEY REFERENCE FOR PASSWORD.................................................................................................................................................17
PROGRAMMABLE PARAMET ERS IN ACCORDING WITH PASSWORD OR SMART CARDS........................................................19
READ AND RESET DATA....................................................................................................................................................................20
INFO SYSTEM DATA...........................................................................................................................................................................22
SYSTEM TEMPERATURE INFORMATION PROCEDURE..................................................................................................................23
DOSES SLIGHT ADJUST PROGRAMMING.......................................................................................................................................24
SET DOSES PRICE PROGRAMMING.................................................................................................................................................25
SHIFT DOSES SLIGHT ADJUST PROGRAMMING............................................................................................................................26
SET SHIFT DOSES PRICE PROGRAMMING......................................................................................................................................27
AUTOMATIC CLEANING OF COFFEE GROUP..................................................................................................................................28
AUTOMATIC CLEANING OF MILK FROTHER...................................................................................................................................29
MANUAL CLEANING OF MILK FROTHER AND COFFEE OUTLET ..................................................................................................30
MANUAL CLEANING OF BARISTA STEAM.......................................................................................................................................31
OTHER RECOMMENDED CLEANING ................................................................................................................................................31
MACHINE FUNCTIONS MESSAGES...................................................................................................................................................32

LB. 00151-00-GB Pag. 302/08/06
INTRODUCTION AND GENERAL INSTRUCTIONS
Thoroughly read the instructions contained in this booklet because it gives important information regarding safety for installation, use and maintenance.
Keep this booklet in a safe and accessible place for further consultation.
This machine must be used only for the purpose it was designed:
dispensing coffee, cappuccino and pouring hot water
Any other use is to be considered inappropriate and therefore dangerous.
The manufacturer declines all responsibility for damage caused by any improper, incorrect and unreasonable use of the machine.
The use of any electric appliance implies the observance of some fundamental rules.
More specifically:
-do not touch the appliance with your hands or feet wet or damp
-do not use the appliance with bare feet
-do not pull the power cord to disconnect the plug from the power socket
-do not leave the appliance exposed to the weather (rain, sun, frost)
-do not let children or untrained persons use the appliance.
Before carrying out any cleaning and maintenance, disconnect the appliance from the power supply, pulling the plug from the power socket and turning off the
main switch.
In case of failure or malfunction turn the machine off and do not attempt to carry out any repairs or direct operations on the machine.
All repairs must be carried out in a Macchiavalley Authorised Service Centre, using original spare parts only.
Failure to comply with the above recommendations will compromise the safety of the machine and the warranty conditions.
If this machine is no longer used, we recommend that it is made inoperative by disconnecting the power cord and water tube from the power supply, and all
potentially dangerous parts are made harmless, especially to protect children who might use the machine for their games.
INSTRUCTIONS FOR INSTALLATION
Installation must be carried out according to the manufacturer’s instructions.
An incorrect installation can cause damage to persons, animals or things; the manufacturer declines all responsibility for such situation.
After unpacking check that the machine is not damaged.
If in doubt, do not use the machine and contact a Macchiavalley Authorised Service Centre.
All packing materials (plastic wrapping, polystyrene, nails, etc.) are potentially dangerous and must be kept out of children’s reach and disposed of in a safe
manner for the environment.
Before connecting the machine to the power supply make sure that the rating information of the machine correspond to that of the power supply: if the power
socket is not compatible with the plug of the machine (if supplied), replace the socket with a proper one, ensuring that the size of the cable is suitable for the
absorbed power of the machine. If you replace the power cord, use an H07RN-F cord again.
Make sure that the voltage rating of the machine corresponds to that of the power supply, and that the power supply is adequate to additional power absorption
of the machine.
After installing the main switch and fuses (see annex), connect the power cord of the machine to the main switch according to the attached electrical diagram.
The use of adapters, multiple power boards and extension cords is not recommended.
If it is absolutely necessary, then use only single or multiple adapters and extension cords which comply with current safety regulations, ensuring also that the
electricity load capacity of the single adapters and extension cords and the maximum power rating of the multiple adapters is suitable.
The electrical safety of this machine can be guaranteed only if correctly connected to an efficient earth circuit as indicated by current electrical safety
regulations.
It is necessary to check this fundamental safety prerequisite, and in case of doubt, ask a professionally qualified technician to check the circuit.
The manufacturer declines all responsibility for any damage caused by failure to earth the machine.
In order to avoid any dangerous overheating, we recommend that the power cord be fully unwound.
The power cord of this machine must not be replaced by the customer.
In case of damage to the cord, contact exclusively a Macchiavalley. Authorised Service Centre.
Do not leave the machine connected unnecessarily.
Turn off the main switch of the machine when not in use.
Do not cover the ventilation openings of the machine.
Place the machine at an adequate distance from walls, objects, etc.
The machine must be connected to a system with a water pressure, which is not greater than 5 bar. (Kg/cm2).
If the pressure is greater, a pressure reducer must be installed.
Install a water softener above the machine.
ENVIRONMENTAL CONDITIONS TO USE THE MACHINE
Environmental temperature: 5 –45 °C (empty the hy draulic system in case of freezing)
Maximum humidity: 80% relative humidity
Water hardness: 5° eh, 7° dH, 13° Fh
SPECIAL INSTRUCTIONS FOR USE AND MAINTENANCE
For a correct functioning of the machine it is fundamental to comply with the manufacturer’s instructions, having qualified personnel to carry out ordinary
maintenance and to check all safety devices.
Avoid exposing hands or other parts of the body to the coffee dispensing spouts or to the hot water nozzle. The water from the nozzle is very hot and can cause
severe burns.
The water nozzle is very hot and therefore must be handled with care, holding it in the appropriate point.
Do not use the machine without water.
Do not leave the machine in rooms where the temperature is below zero °C or 32 °F without having first drained the boiler and the hydraulic circuit.
A softener needs to be used where the water is very hard and where the calcareous scaling is particularly extensive.
In any case, regularly check the boiler even where the water is not very hard, and if necessary, have the resistors and tubing descaled by specialised
technicians.
Failure to clean Macchiavalley. machines daily, especially for brewing unit and milk frother, using approved cleaning products and following specified cleaning
procedure will result in void warranty and service contract.
NOTE:
A)THE REGISTRATION AND TECHNICAL DATA PLATE OF THE MACHINE IS ON THE FRONT COVER MACHINE.
B)THE EQUIPMENT SHALL BE INSTALLED IN COMPLIANCE WITHFEDERAL, STATE AND LOCAL REGULATIONS.

LB. 00151-00-GB Pag. 402/08/06
MACHINE KEYPAD
KEY
REFERENCE
Tasman
-
Denali
LM
Tasman
-
Denali
COF
Tasman Denali
SELF LM
Tasman
-
Denali
SELF COF
COFFEE GROUP 1Espresso 1 Espresso Espresso Espresso
2Cappuccino 2 Espresso Espresso Macchiato
Coffee
3Ristretto 1 Coffee DISABLE DISABLE
4Latte macchiato 2 Coffee DISABLE DISABLE
5Kaffee 1 Black Coffee Large coffee Large coffee
6Milchkaffee 2 Black coffee Latte macchiato Black coffee
7Kaennchen 1 Americano DISABLE DISABLE
8Milch 1 Jug DISABLE DISABLE
9Heisswasser Hot water Hot water Hot water
10 Dampf Steam Milk Americano
SERVICES 11 On-Off On-Off On-Off On-Off
13 ++++
14 ----
15 Scroll Scroll Scroll Scroll
16 Esc Esc Esc Esc
17 Enter / Clean / Shift/
Continuos Enter / Clean / Shift Continuos Enter / Clean / Shift Enter / Clean / Shift

LB. 00151-00-GB Pag. 502/08/06
ELECTRIC -HYDRAULIC CONNECTION
200V-1+N-50/60HZ 400V-3+N-50/60HZ200V-3 -50/60HZ
230V-1+N-50/60HZ 230V-3 -50/60HZ
120V-1+N-50/60HZ
H2O IN
(1-5 Bar)
H2O OUT
WATER SOFTNER
WATER FILTRE

LB. 00151-00-GB Pag. 602/08/06
STARTING UP
WARNING:
Every time that you power ON the machine, any smart card must be removed from the slot otherwise the display
will show the following error message:
Card error
After having connected the machine to the water and electric networks, turn the switch on (see diagram). The display shows:
Macchiavalley
ZZZZ ZZZ ZZZ
Rev. X.XXX
Where :
ZZZZ ZZZ ZZZ : indicates the installation date
REV. X.XXX indicates the software release inserted.
After a few seconds the display shows: Machine parameter
Language
English
Press the key N°13 (+) or N°14 (-) to display the available languages
Press the key N°17 (Enter ) to confirm the chosen language, the display shows:
Machine parameter
Machine model
Tasman
Press the key N°13 (+) or N°14 (-) to select the machine model Tasman or Denali.
Press the key N°17 (Enter ) to confirm the chosen model, the display shows:
Machine parameter
Installation date
- - / - - / - -
Press the key N°13 (+) or N°14 (-) to insert the installation date.
Press the key N°17 (Enter ) , the display shows:
Machine parameter
Installation date
- - / - - / - -
Please confirm
Press the key N°17 (Enter ) to confirm the installation date , the display shows:
OFF
WARNING:
If the language choice procedure is not displayed, keep the machine in OFF mode; it is absolutely necessary to
carry out PRESET CONFIGURATION DATA procedure. See system-programming paragraphs.

LB. 00151-00-GB Pag. 702/08/06
Press the key N°11( ON/OFF ), the display shows:
Filling - up steam boiler
During this stagethe steam boiler is being filled up.
WARNING: The solenoid valve of the steam nozzle automatically opens to release the air inside the boiler.
When the steam boiler has been filled up, the display shows:
Filling
-
up coffee boiler
Press T 1
When water exits
During this stage the coffee boiler is being filled up
WARNING:
The upper piston of the coffee group positions itself inside the brewing chamber, and the coffee boiler starts filling up. When
the coffee spout starts dispensing water, press the key dose N° 1 to confirm that the filling up procedure has been carried
out. When the coffee boiler has been filled up, the display shows:
Coffee Steam
XXX C° YYY C°
Where:
-XXX °C indicates the temperature of the coffee boiler
-YYY ° C indicates the temperature of the steam boiler
WARNING:
A) DURING THIS STAGE REMOVE ANY PITCHER WITH MILK OR ANY OTHER KIND OF LIQUID BY THE STEAM WAND.
B) DURING THIS STAGE THE STEAM NOZZLE SOLENOID VALVE FOR SIRIO COF VERSION AND THE MILK FROTHER SOLENOID
VALVE FOR SIRIO LM WILL STAY OPEN UNTIL 95°C. THIS WILL RELEASE THE AIR FROM THE BOILER AND GENERATE STEAM.
IN THE SIRIO LM SIRIO
c) WHEN THE BOILER TEMPERATURE OF 50°C ITS REACHED THE MACHINE CARRY-OUT A RINSING GROUP .THIS IS USEFULL
TO RELEASE AIR FROM THE WATER COFFEE CIRCUIT; THE DISPLAY WILL SHOW:
G. auto cleaning
Then the display shows:
Select drink
q q
For machine configurations: Standard or Self.
Insert card
For machine configurations: waiters’ card or Self with credit card.
Insert coin
0000
For machine configuration: Self with coin mechanism.
WARNING:
a) For Self-configuration the key N° 11 (ON/OFF) is only enabled for ON function.
To turn the machine in OFF mode, open the machine door or insert the smart card and press the key N°11(ON/OFF).
You can also use the main external switch (see diagram).
b) In case of temporary voltage drop, the machine will be automatically turned back to the stage previous to the voltage
drop.

LB. 00151-00-GB Pag. 802/08/06
If the display shows: SELECT DRINK
Coffee not ready
The displayed message indicates that the set up heating temperature in the coffee boiler has not been reached yet, and
therefore coffee based dispensing are not enabled
If the display shows: SELECT DRINK
Steam not ready
The displayed message indicates that the set up heating temperature in the steam boiler has not been reached yet, and
therefore milk based dispensing and hot water and steam dispensing are not enabled.
In both cases wait until the boiler has reached the set up heating temperature.

LB. 00151-00-GB Pag. 902/08/06
COFFEE, CAPPUCCINO, MILK DISPENSING
1) Machine configurations Standard
The display shows: SELECT DRINK
Place a cup under the adjustable in height coffee dispenser, and press the dose key required.
The display shows: XXXXXX
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
where “XXXXXX” indicates the selected dose key name.
The cursor indicates the amount of drink being dispensed.
WARNING:
a) Pressing the same key during dispensing can stop the selected dose.
In case of a milk-based dose, press twice to stop dispensing; press once to stop milk dispensing, and once to stop coffee dispensing;
the sequence depends on the type of dispensing.
b) Is possible delivery long drink ( Jug ) if in “ Dose Programming “ the parameter “ Repetition cycles ” has been programmed with a
number of cycles over 1 (maximum value is 9)
When the dose key with a number of “ Repetition cycles “ over 1 is pressed ; the display shows:
XXXXXX
Y
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
Where :
“XXXXXX” indicates the selected dose key name.
Y indicates the number of cycles that the machine will automatically carry out for the dose you will select.
The cursor indicates the amount of drink being dispensed.
WARNING:
a) If you want to stop the automatic repetition cycles, press the same selected button.
b) This function is not enabled for the decaffeinated cycle.
c) This function is not enabled for self machine, self machine with credit card, self machine with coin mechanism, and for self with credit
card + coin mechanism.
2) Machine configurations with waiters’ card.
The display shows:
INSERT CARD
Insert the smart card into the proper slit, the display shows in order:
SELECT DRINK
WAITER XX
Where XX indicates the number of the inserted waiters’ card.
Place a cup under the adjustable in height coffee dispenser, and press the dose key required.
The display shows: XXXXXX
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
where “XXXXXX” indicates the selected dose key name.
The cursor indicates the amount of drink being dispensed.
WARNING:
a) Dispensing is enabled only when the smart card is inserted.
b) The number of carried out dispensing is saved in the counter relevant to the inserted card.
c) Pressing the same key during dispensing can stop the selected dose.
d) In case of a milk-based dose, press any key twice to stop dispensing; press once to stop milk dispensing, and once to stop coffee
dispensing; the sequence depends on the type of dispensing.

LB. 00151-00-GB Pag. 10 02/08/06
3) Machine configurations Self
The display shows: SELECT DRINK
Place a cup under the coffee dispenser and press the dose key required.
The display shows: XXXXXX
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
where “XXXXXX” indicates the selected dose key name.
The cursor indicates the amount of drink being dispensed.
WARNING:
a) On-Off button is enabled only when the smart card is inserted
b) Extra milk function is not enabled
c) Steam function is not foreseen and not enabled
d) Decaffeinated function is not foreseen and not enabled
e) Continuous dispensing is not enabled
f) Pressing any key during dispensing cannot stop the selected dose.
4) Self machine with credit card.
The display shows:
INSERT CARD
Insert the smart card into the proper slit, the display shows the message:
SELECT DRINK
alternated with the message
CREDIT XXXXX
Where XXXXX indicates the residual credit of the inserted card.
Place a cup under the coffee dispenser and press the dose key required.
The display shows: XXXXXX
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
Where XXXXXXXX is the name of the selected drink.
The cursor indicates the amount of drink being dispensed.
WARNING:
a) On-Off button is enabled only when the smart card is inserted
b) If you press a selection button before inserting the smart card, the display shows the cost of the selected drink.
c) Extra milk function is not enabled
c) Steam function is not foreseen and not enabled
d) Decaffeinated function is not foreseen and not enabled
e) Continuous dispensing is not enabled
f) Pressing any key during dispensing cannot stop the selected dose.
5) Self machine with coin mechanism.
The display shows:
INSERT COINS
Alternated with the message:
SELECT DRINK
XXXXX
Where “XXXXX” indicates the money amount inserted in the machine.
Place a cup under the coffee dispenser and press the dose key required.
The display shows:

LB. 00151-00-GB Pag. 11 02/08/06
XXXXXX
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
Where XXXXXXXX is the name of the selected drink.
The cursor indicates the amount of drink being dispensed.
WARNING:
a) On-Off button is enabled only when the smart card is inserted
b) When pressing the selection button before inserting coins, the display shows the cost of the selected drink.
c) The credit will not be returned and will be available for the next selection.
d) To get the coins back before having selected the dose, press the relevant button of the coin mechanism.
e) Extra milk function is not enabled.
f) Steam function is not foreseen and not enabled.
g) Decaffeinated function is not foreseen and not enabled.
h) Continuous dispensing is not enabled.
i) The selected dose cannot be stopped.
6) Self machine with credit card and coin mechanism.
The display shows:
INSERT COINS
Alternated with the message:
INSERT CARD
For further information, see the paragraphs 4 and 5.
PLEASE NOTE:
To disable the functioning of the machine with credit card, coin mechanism or both, proceed as follows:
Turn the machine ON.
Insert the owner, service or technician’s smart card into the proper slit.
Press the key N°17, the display shows:
FREE DRINKS
XXXXXX
Where XXXXXXX indicates:
ENABLED (Self-configuration: the machine dispenses free drinks)
DISABLED (Coin mechanism: the machine dispenses drinks against payment)
Press the key n°13 or N°14 to modify the level mode.
Press the key n° 16 to return to the previous environment and/or exit.Press the keyn°17 to confirm, the display shows:
SELECT DRINK
SHIFT DISPENSING
The machine delivers 10 drinks, that can be doubled by means of the Shift button, for a total number of 20 drinks.
Press key No. 17 ( SHIFT ) once before selecting a dose, the display shows:
SELECT DRINK
Where “ “ indicates that the selected dose will be a shift dose.
Place a cup under the adjustable in height coffee dispenser, and press the dose key required.
The display shows:
XXXXXX
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
where “XXXXXX” indicates the selected dose key name.
The cursor indicates the amount of drink being dispensed.
PLEASE NOTE:
a) The shift dispensing are enable only if the dose keys have been programmed in Set doses shift.
b) Press again the key No. 12 ( SHIFT ) to exit from the SHIFT mode .

LB. 00151-00-GB Pag. 12 02/08/06
CONTINUOUS DISPENSING WITH BUTTO N°17
The “ Continuos “ function for button N°17 is enabled only if in “Parameters machine“ the parameters “ Button 17 function ” has been
programmed as Continuos.
Press the key N°17 as many times as the number of doses you want to dispense, (maximum value is 9) ; the display shows:
SELECT DRINK
X
Where X indicates the number of cycles that the machine will automatically carry out for the dose you will select.
Press a dose key the display shows :
xxxxxxx
X
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
Where :
“XXXXXX” indicates the selected dose key name.
The cursor indicates the amount of drink being dispensed.
WARNING:
a) When the “ Continuos” function is enabled automatically is disabled the “ Shift “ function.
b) If you want to stop the automatic continuous cycles, press the same selected button.
c) This function is not enabled for the decaffeinated cycle.
This function is not enabled for self machine, self machine with credit card, self machine with coin mechanism, and for self with credit
DECAFFEINATED CYCLE
This function is activated by opening the decaffeinated coffee door, and the display shows :
-pour in the powdered coffee
-close the door
-Press the desired dose key and the display shows :
XXXXXX
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
Where indicates that the selected dose will be dispensed without the activation of the grinders.
The cursor indicates the amount of drink being dispensed.
WARNING:
a) If the decaffeinated door is not closed, or if the dose button is not selected, the machine will automatically cancel this function after
20’’. The coffee group will carry out a cleaning cycle of the brewing chamber, the display shows:
b) This function is not enabled for self machine, for self machine with credit card, for self machine with coin mechanism, and for self with
credit card + coin mechanism.
c) The Decaffeinated function is enabled only if in “Dose programming“ the parameter “ Decaffeinated enabled / disabled ” has been
programmed enabled.

LB. 00151-00-GB Pag. 13 02/08/06
HOT WATER DISPENSING
Place a cup under the hot water outlet, and press the hot water key dose n°9. Dispensing will be automatically stopped once the
programmed dose is over.
The display shows: HOT WATER
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
The cursor indicates the amount of drink being dispensed.
WARNING:
a) Handle the hot water spout with caution because it might cause burns, due to high temperature.
b) The hot water message will not be displayed in case another dispensing is being carried out.
c) Hot water cannot be dispensed simultaneously with steam.
a) Pressing the key N°9 can stop the dose, which is being dispensed.
EXTRA FOAMED MILK FUNCTION
Extra milk function enables to dispense extra foamed milk in the following way:
-Press any milk-based key and keep it pressed, after 2 seconds foamed milk will start being dispensed.
-By releasing the pressed key, dispensing will be stopped.
WARNING:
This function is not enabled for self machine, for self machine with credit card, for self machine with coin mechanism, and for self with credit
card + coin mechanism.
STEAM DISPENSING
To warm up drinks (milk, cognac, etc.) do as follows: put the steam nozzle into the drink you want to heat up and then press the keyN°10to
start and stop dispensing.
The display shows:
STEAM
WARNING:
a) Handle the steam nozzle with caution because it migth cause burns, due to high temperature.
b) The steam message will not be displayed in case another dispensing is being carried out.
c) Steam cannot be dispensed simultaneously with hot water.
d) This function is not enabled for self machine, for self machine with credit card, for self machine with coin mechanism, and for self
with credit card + coin mechanism.
SYSTEM CLOCK PROGRAMMING
In system clock programming it is possible to set the time on the display :
To enter the system clock programming, proceed as follows:
Turn the machine OFF.
Insert the owner’s smart card into the proper slit or owner password into the proper slit.
Press the key N°17, the display shows: SYSTEM CLOCK PROGRAM.
YY-MM-DD DAY HH:MM
--/ --/ -----/ --/--
Press the key N°13 and N°14 to program the date ( YY-MM-DD) and the time ( DAY HH:MM )
Press the key N°17 to confirm the modification.
Press the key N° 16 to return to the previous environment and/or exit.

LB. 00151-00-GB Pag. 14 02/08/06
SYSTEM CLOCK PROGRAMMING
N:B: The System Clock parameters are available only with the system clock enable.
To enter in System clock programming, proceed as follows.
WITH SMART-CARD: Insert the Owner or Waiter smart card into the proper slitand keep pressed thekey N°17 (Enter) .
WITH PASSWORD : Digit the Owner or Waiter password .
The display shows :
Press the key N° 14 ( -), the display show:
Press the keys N°17 (Clean/Enter), the display shows:
Press the key N° 13 ( + ), the display show:
Press the keys N°17 (Clean/Enter), the display shows:
Press the keysN° 13(-) and N° 14 (+) to change the time (HH : MM).
Press the key N°17 (Clean/Enter) to confirm the modification carried out.
CLOCK DISPLAY
Press the keysN° 14 (-) and N° 13 (+) to display the clock ( ENABLE ) or to do not display it (DISABLE)
Press the key N°17 (Clean/Enter) to confirm the modification carried out.
AUTO START-UP
Auto Start-up Disable
Enable
+ /-
Auto Start-up
ON OFF
XX:XX XX:XX
Enter
Auto Start-up
Day Off
XXXX
Enter
Press the keys + /-to program the
machine day off
(Sunday -Monday etc.)
+ / -
Press the keys + / -to program the
automatic switch ON and OFF
+ / -
Select
Info reset
Select
System Manager
System Manager
Machine Parameter
System Manager
System Clock programming
System Clock programming
HH:MM
--/ --
System Clock programming
Clock Display
Disable

LB. 00151-00-GB Pag. 15 02/08/06
AUTOMATIC RINSING CYCLE
1) Automatic group rinsing.
A timed rinsing cycle of the brewing chamber is automatically carried out 15 minutes after the last dispensed drink and every 180 minutes
when the machine is in stand-by mode.
The display shows:
GROUP AUTOCLEANING
PLEASE NOTE:
5 seconds before the starting of the rinse cycle the machine will BEEP !.
2) Automatic milk frother rinsing.
This is a rinsing cycle of the milk frother , which is carried out by the machine automatically 10 minutes after the last milk based selection
and every 180 minutes when the machine is in stand-by mode.
PLEASE NOTE:
5 seconds before the starting of the rinse cycle the machine will BEEP !.
CLEANING OF COFFEE GROUP, MILK FROTHER AND EMPTYING BIN
This message is displayed at preset time or after a programmed no. of cycles
During the programming stage it is possible to set the time or a number of cycles to show on display when to carry out the group cleaning ,
milker cleaning and finally when to empty the coffee ground bin:
The display shows:.
SELECT DRINK
PLEASE CLEAN
Carry out cleaning procedures as shown in the following paragraphs.
WARNING:
A) if cleaning is not carried out when the messages are displayed, when the time out set during the programming stage elapses, dispensing
will be disabled and the display will show:
STOP
PLEASE CLEAN
Carry out cleaning to enable dispensing.
B) if the group or milker cleaning is carried out before the set time and no other dispensing is carried out, the previously set cleaning of the
rinsed component will be cancelled.
C) in case of power failure , when the machine is turned back on , the display shows:
SELECT DRINK
If you press a drink selection button , and the cleaning cycle were not carried out the display shows :
SELECT DRINK
PLEASE CLEAN

LB. 00151-00-GB Pag. 16 02/08/06
ACCESS THE MAIN SETTING MENUS WITH PASSWORD OR SMART-CARD
A) ACCESS THE MAIN SETTING MENUS WITH PASSWORD
To enter the programming environments, a password is required which define the access rights to the different
environments.
The password must be composed with 5 numbers.
To insert the passwords proceed as follows:
-Turn the machine OFF
-Keep N°17 “Enter” key pressed and at the same time turn on he machine. The display shows:
-
Enter one of the following passwords:
-Waiter _ _ _ _ _ ( _ = Clean / Enter )
-Roaster 1_ _ _ _
-Owner 2 2 2 2 2
After insert the password the display shows the main menu programming environments:
Select
Info -reset
Select
Dose programming
+ /-
Select
System manager
+ /-
+ / -
Off
Esc
Esc
Esc
Password
-----

LB. 00151-00-GB Pag. 17 02/08/06
KEY REFERENCE FOR PASSWORD

LB. 00151-00-GB Pag. 18 02/08/06
B) ACCESS THE MAIN SETTING MENUS WITH SMART CARD
To enter the programming environments , insert one of the following smart cards into the proper slit with the machine in off: :
-WAIETR SMART CARD
-ROASTER-SMART CARD
-OWNER SMART CARD
the display shows :
Select
Info -reset
Select
Dose programming
+ /-
Select
System manager
+ /-
+ / -
Off
Esc
Esc
Esc
WARNING:
After insert the card, wait at least 2 seconds before removing the card from its proper slit; during this time the display shows
a card icon. If the card is removed during this stage, the card might suffer irreparable damages.
If you use a card having a card code different from the machine code, the card can no longer be used after two failures.

LB. 00151-00-GB Pag. 19 02/08/06
PROGRAMMABLE PARAMETERS IN ACCORDING WITH PASSWORD OR SMART CARDS
System manager
Password or
Smartcard
WAITER
Password or
Smartcard
ROASTER
Password or
Smartcard
OWNER
Info -Reset Dose Data X* X* X
System Data
Dose Slight Adj. XXX
Dose Programming
Calibration
Machine Parameter
Language
M. Configuration
Serial X*
Ground Numbers XXX
Milker
Milker Rinsing
End Delivery
Waiting Time
Additional Milk
Cold Water Mixer
Decimal Price
Scale Factor
Alarm detail
Boiler controller
Temperature M.U.
Boiler Temperature X* X* X*
Display Temperature X
Steam Nozzle
Installation date
System Clock set up
System Clock
YY-MM-DD Day HH:MM
X* X* X*
Clock Display X
Auto Start-up X
ON -OFF X
Day Off X
Service -
Clean/ Rinse
Cleaning time XXX
Group Cleaning
Group Rinsing XXX
Milker Cleaning
Milker Rinsing XXX
Installation date
Maintenance Set up Water Filter
Machine Service
Grinder Cycle
Group Cycle
Change Password
Technician
Service
Owner X
Roaster XX
Waiter
Set-Up Encoder M.H. M.E. M.L.
Max High Motor Pulse
H.M. Stand by Pos Puls
H.M. Deliv. Pos Puls
Max Low Mot. Puls
L.M.Expell Pos Puls
L.M. Grind Pos Puls
Test Actuators Test Actuators 1
Test Actuators 2
Boiler Draining Boiler Draining
Alarm History Alarm History X* X* X*
File Manager Download
Load
Update Software Download
Load
Preset Config. Data
Preset Configuration Data
Where X indicate the available program and X* indicate the partial available program
N.B. The System Clock set up is available only with the optional clock and if the SystemClock is set in ON position
by the Technician

LB. 00151-00-GB Pag. 20 02/08/06
READ AND RESET DATA
To enter in Read and reset data , proceed as follows.
WITH SMART-CARD: Insert the Owner smart card into the proper slitand with machine in OFF keep pressed thekey N°17
(Enter) .
WITH PASSWORD : Digit the Owner password .
The display shows :
Info reset
Read Doses Data
Group cleaning
X
Milker cleaning
X
Enter
Enter
Read doses Data
TX XXXXXXX
qq N° 0 --i0 qq
Total cashing
x.xx
Read doses Data
qSelect button q
Read doses Data
qq Select button qq
Select a button
between T1 to T 10
Select a button between
T1 to T 10
Read doses Data
TX XXXXXXX
q N° 0--i 0 q
X:Indicates the n° of Extra
milkcarriedout
X : Indicates the n° of Milker
cleaning carried out
X.XX:Indicates the total
cashing of the machine.
The total will be calculates if
the selling price has been set
for each dose.
XXXXX Indicates the name of the selected button
N° 0 Indicates the number of cups dispensed
0 0 Indicates the number of decaffeinated
dispensed drink.
XXXXX Indicates the name of the SHIFT selected
button
N° 0 Indicates the number of the SHIFT cups
dispensed
0 0 Indicates the number of the SHIFT
decaffeinated dispensed drink.
Read Doses Data
x
Press the + /-keys to select the count AorB.
Is possible read two counter A or B, which can be use one
for the total number of the dispensed daily doses and .
another for the total number of the dispensed weekly or
monthly doses .
Extra milk
X
Enter
Enter
Press twice the dose
button to read the
SHIFT count
X:Indicates the n° of Group
cleaning carried out
Enter
Enter
Enter
Esc
Select
Inforeset
Enter