Mackie ART200AM User manual

APPLICATIONS
1OF 6 PAGES
ART200AM
Active Speaker System and Mixer
SPEAKER
ART200AM
ART Series
Careful acoustic design and advanced materials
have resulted in an exceptional full range, full del-
ity, self-contained sound system. The ART200AM
provides an ideal combination of high power,
low distortion and wide bandwidth for permanent
installations.
The two-way design consists of a 12" woofer
that uses a massive magnet structure for accurate
bass reproduction and a CD horn loaded to a 1"
exit compression driver. The CD horn is a part of
the molded enclosure. Two discrete power ampli-
ers and an electronic crossover are matched to
the two transducers and provide time correction,
CD horn compensation and peak-limiting, as well
as over-excursion and thermal protection.
A three input mixer features two mic/line inputs;
one balanced and one unbalanced. These two
inputs share a 4-band EQ, and an unbalanced
signal processing loop. The third input is an unbal-
anced line-level input. A single rotary control for
each adjusts the input level and mix. A special bus
connection is available to patch together additional
ART200AM speaker systems.
All components are housed in a lightweight,
vented enclosure formed from polypropylene that is
extremely rigid and is weather resistant. The woofer
is protected by a metal grille. All controls and con-
nectors are recessed on the rear. A 1-3/8" stand
socket and M10 threaded inserts are molded into the
cabinet to provide quick and easy installation using
specially designed accessory mounting hardware.
This Mackie Industrial product is covered by
an exclusive, one-time NO FAULT repair policy in
addition to a ve year, limited warranty.
Live Sound/Music Reinforcement
High-Level AV Playback
Large Speech Systems
Features
90° x 70° constant-directivity horn with 1" exit
compression driver
12" high-efciency woofer
Internal bi-amplier: 120W LF, 40W HF, and
driver-optimized electronic crossover
Three input mic/line mixer
Total system protection: over-excursion, ther-
mal, short circuit and peak limiting
Compact, lightweight polypropylene enclosure
Built-in hand grip, M10 y points and stand
socket
Optional installation accessories include hard-
ware for truss, grid, pipe and adjustable wall
mounts
Exclusive Mackie Industrial — one-time NO
FAULT repair policy
Five year, limited warranty

2OF 6 PAGES
SPEAKER
ART200AM
ART200AM Active Speaker System and Mixer
Specications
System Acoustic
Frequency Range (–10 dB): 50Hz–19kHz
Frequency Response (–3 dB): 70Hz–17kHz
Horz. Coverage Angle (–6 dB): 90°, averaged
1kHz to 10kHz
Vert. Coverage Angle (–6 dB): 70°, averaged
1kHz to 10kHz
Directivity Factor; Q(DI): 9.5 (9.8), averaged
1kHz to 10kHz
System Sensitivity1: 101dB (1W @ 1m)
Rated Maximum Peak SPL2: 122dB @ 1m
Crossover: 1.8kHz, 24dB/octave,
0.3mS HF delay
Speaker Protection: Thermal, over-excursion
Transducers
Low-Frequency: 12" (300mm) woofer
High-Frequency: Polynomial horn-loaded
1" (25mm) compression driver
Electronics
Power Amplier Rating: LF: 120W, HF: 40W
Distortion: 0.1% THD, nominal power @
1kHz and 10kHz
Inputs: 1-2, mic: 5mV, 12kΩ, balanced,
0.25" (6.3mm) TRS
1-2, line: 60mV, 10kΩ, unbalanced,
0.25" (6.3mm) TS
3: 300mV, 10kΩ, unbalanced,
0.25" (6.3mm) TS
Signal Processing Loop: Line level, –10dB nominal,
unbalanced, 0.25" (6.3mm) TRS
Commlink Output: Line level, –10dB nominal,
unbalanced, 0.25" (6.3mm) TRS
Indicators: Power On, Limiter active
Electronics Protection: Thermal, limiter,
short circuit
Controls, Switch: Power On/Off
Voltage Selector
Controls, Rotary: Inputs 1-3, Volume
Low EQ: ±15dB @ 60Hz
Low-Mid EQ: ±15dB @ 400Hz
High-Mid EQ: ±15dB @ 2.5kHz
High EQ: ±15dB @ 12Khz
Power Requirements: 115/230 VAC, 2A, 50/60Hz
1 Measured on axis in the far eld, referenced back to 1 watt RMS from maximum power
and to 1 meter distance using the inverse square law. Listed sound pressure represents
an average from 300Hz to 3kHz.
2 RMS using 20Hz to 20kHz, PN Spectrum, Peak for 2 hours with +6 dB crest factor.
Physical
Enclosure: Gray, semi-trapezoidal,
reinforced polypropylene
Dimensions (HxWxD): 24.42" x 15.36" x 12.29"
(620mm x 390mm x 312mm)
Weight: 39.7 lbs. (18kg)
Mounting: Four M10 metal threaded inserts,
1.375 in. (35mm) lockable stand mount
Options
ART A-2 Wall mount bracket, black
ART A-3 Pipe mount bracket, black
ART A-4 Protective soft cover
ART A-5 Swivel, tilt, wall mount
hardware, black
ART A-7 Full front metal grille, black
ART A-11 U-bracket, black
SM Tripod stand

3OF 6 PAGES
ART200AM Active Speaker System and Mixer
0˚
200Hz
250Hz
315Hz
400Hz
0˚
500Hz
630Hz
800Hz
1kHz
0˚
1.25kHz
1.6kHz
2kHz
2.5kHz
0˚
3.15kHz
4kHz
5kHz
6.3kHz
0˚
8kHz
10kHz
12.5kHz
16kHz
ART200AM
Vertical Polars
Vertical Off-Axis Frequency Response (UP)
Vertical Off-Axis Frequency Response (DOWN)

4OF 6 PAGES
ART200AM Active Speaker System and Mixer
0˚
200Hz
250Hz
315Hz
400Hz
0˚
500Hz
630Hz
800Hz
1kHz
0˚
1.25kHz
1.6kHz
2kHz
2.5kHz
0˚
3.15kHz
4kHz
5kHz
6.3kHz
0˚
8kHz
10kHz
12.5kHz
16kHz
ART200AM
Horizontal Polars
Horizontal Off-Axis Frequency Response

5OF 6 PAGES
ART200AM Active Speaker System and Mixer
Frequency response is measured on-axis at a distance referenced back to
1m at 1-watt drive. Shown as a half space (2π) environment.
Directivity Index
Beamwidth vs. Frequency
15.36" (390mm)
24.42" (620mm)
FRONT
12.29" (312mm)
7.44" (189mm)
7.36" (187mm)
14.18" (360mm)
3.58" (91mm)
BOTTOM
14.22" (361mm)
10.20" (259mm)
8.35" (212mm)
SIDE
12.29" (312mm)
REAR
16.98"
(431mm)
22.25"
(565.2mm)
5.25"
(133.4mm)
9.50"
(241.3mm)
6.25"
(158.7mm)
8.67"
(220.0mm)
6.69" (170mm)
15.36" (390mm)

SPEAKER
www.mackieindustrial.com
16220 Wood-Red Rd NE, Woodinville, WA 98072 USA
888.337.7404, fax [phone], [e-mail]
UK + 44 1268 570 808, fax + 44 1268 570 809, [email protected]om
ITALY [phone], fax [phone], [email protected]
FRANCE [phone], fax [phone], [e-mail]
GERMANY [phone], fax [phone], [e-mail]
Electronic les for this product available at:
www.mackieindustrial.com
This Specication Sheet ART200AM.PDF
Architects’ & Engineers’ Specications ART200AMAE.TXT
Quick-Start Manual ART200AMQS.PDF
Owner/Operator’s Manual ART200AMML.PDF
CADD les ART200AM.DXF
EASE data ART200AM.EAS
6OF 6 PAGES
SPEAKER
ART200AM
ART200AM Active Speaker System and Mixer
Mackie Designs continually engages in research related to product improvement. New material,
production methods, and design renements are introduced into existing products without notice
as a routine expression of that philosophy. For this reason, any current Mackie Industrial product
may differ in some respect from its published description, but will always equal or exceed the
original design specications unless otherwise stated. ©1999-2000 Mackie Designs Inc. All
rights Reserved. and are registered trademarks of Mackie Designs Inc. Mackie
Industrial is a trademark of Mackie Designs Inc.
part no. 910-162-10
Architects’ & Engineers’ Specications
The amplied loudspeaker/mixer system shall be
a self-contained unit, housed in a reinforced polypro-
pylene enclosure and consisting of the following sub-
systems: (1) vented two-way loudspeaker system, (2)
integrated power ampliers and crossover network,
(3) integrated mic/line mixer with 4-band equalizer.
The low-frequency driver shall be a 12 inch
(300mm) cone type loudspeaker having a voice coil
that is at least 2 inches (50mm) in diameter. The driver
shall present a load that is not less than 16Ω. It
shall be rated to continuously handle band-limited
pink noise at a power input of 120W RMS and peak
inputs of 480W RMS.
The high frequency section shall consist of a 90°
x 70°, constant-directivity polynomial horn having a
1 inch (25mm) entry and horn loaded compression
driver. The compression driver shall have a diaphragm
at least 1 inch (25mm) diameter. The driver shall
present a load that is not less than 16Ω. It shall be
rated to continuously handle band-limited pink noise
at a power input of 40W RMS and peak inputs of
160W RMS.
The drivers shall be aligned with an analog circuit
and crossed over at 1.8kHz by a 4-pole network built
into the power ampliers. Together they shall be
capable of producing 122dB SPL (1m, anechoic).
Two discrete amplifiers shall be provided, capa-
ble of continuously delivering 120W RMS to the
low-frequency driver and 40W RMS to the high-fre-
quency driver. Distortion shall be less than 0.1%
when measured at 1kHz and 10kHz. They shall be
equipped with a multi-function protection circuit
to peak limit and protect the loudspeakers from
overheating, over-excursion, overloads, short
circuits and extreme operating temperatures. An
indicator light shall illuminate when any aspect
of the protection circuit engages.
The integrated mixer shall have two actively bal-
anced mic/unbalanced line inputs. The balanced
mic inputs may also accept unbalanced signals.
Each mic/line input shall have a continuously vari-
able, rotary gain/mix control that will accommo-
date an input signal between 5mV and 60mV. An
additional unbalanced, line-level input and rotary
level/mix control shall be provided to accommo-
date a 300mV signal. An unbalanced, line-level,
signal processing loop and a jack for connecting
a second unit shall also be provided. All audio
connectors shall be standard 1/4", two and three
conductor phone jacks. A 4-band equalizer shall
be provided for the two mic/line inputs. It shall
have lters at 60, 400, 2.5k and 12k Hertz with
a range of ±15dB, and adjustable by continuously
variable rotary controls.
The power supply shall be internal and connected
to 50 or 60Hz source current through a detachable
IEC power cord. It shall have an on/off switch, fuse
holder and threaded grounding screw on the rear
panel. AC voltage shall be selectable between 115
and 230VAC. The power supply shall draw a maximum
of 2A and illuminate an indicator light when on.
The reinforced polypropylene enclosure shall
have a volume of at least 1.65 cu. ft., be trapezoidal
shaped and equipped with a grille to protect the
cone driver. It shall weigh no more than 39.7 lbs.
(18kg). At least four M10 threaded sockets shall
be molded into the cabinet for attaching mounting
hardware, designed for the unit and available from
the manufacturer. The amplied loudspeaker/
mixer system shall be a model ART200AM manu-
factured by Mackie Industrial.