Macnaught GP RAPIDFLO GB-01 User manual

HA14 Issue 15 © 2011 1
FUEL FILTER
HA, GB, VA
Thank you for purchasing a Macnaught Fuel Filter.
Please read and retain this instruction sheet to assist you in the operation and maintenance of
this quality product. Take particular note of all warnings and safety messages.
Instruction manual

HA14 Issue 15 © 2011 2
Features
Your Macnaught Bowl-Type Fuel Filter utilises a replaceable 10µm paper element, contained within a “See-Thru”
weather resistant bowl.
Each unit is manufactured with a Zinc die-cast body, nitrile rubber gasket and a polycarbonate transparent filter
bowl - with drain tap. The die-cast body has 1” BSP (F) inlet and outlet threads, and has a maximum working
pressure of up to 150 psi (1033 kPa).
The Fuel filters are suitable for use with Diesel fuel, Petrol and Methanol. If other fluids are to be filtered, please
consult your Macnaught Distributor.
Important Notes
Follow all recommended safety precautions when handling flammable liquids such as petrol.
Handling flammable liquids is hazardous. There is the potential for an explosion and/or fire.
Your personal safety, and the safety of others are at risk. It is your responsibility to know and follow all
safety precautions when handling flammable liquids & ensure all equipment operators have adequate
instructions concerning safe procedures.
WARNING
IMPORTANT
DO NOT USE TEFLON TAPE ON THESE FILTER ASSEMBLIES
The filter bowl should be hand tightened only
Pumps Filter Kits
HP LITRESTROKE™ - USE HA-01
GT RAPIDFLO™ - USE VA-01
RVP ROTARY VANE PUMP - USE VA-01
Older Models
GP RAPIDFLO™ - USE GB-01

HA14 Issue 15 © 2011 3
HP LITRESTROKE™ (HA-01)
GP RAPIDFLO™ (GB-01)
ASSEMBLY

4
ASSEMBLY
RVP (VA-01) GT RAPIDFLO™ (VA-01)
For Warranty Terms and Conditions see macnaught.com.au