
Install Software
A Insert the MadgeTech Data
Logger Software USB Flash
Drive into an available USB
port on your PC. Click the
Start menu and choose
Computer or My Computer.
Browse to the Removable Disk
drive corresponding to the
USB port you selected.
For Windows 7 users, a dialog
box may appear with a list of
options. Select “Open Folder
to View files”. If you are not
prompted, click the Start
menu and choose Computer
or My Computer and browse
to the Removable Disk drive
corresponding to the USB port
you selected.
B Click on the MadgeTech
Software link from the set-
up screen to start the
installation of the Data Logger
Software. The Install
MadgeTech Software
window will appear, click on
the Install MadgeTech
Software link. Follow the on
screen prompts to complete
the installation. Click Back to
MadgeTech Contents when
completed. See the Software
Manual or go online at
for
additional information.
1 Connect USB Data Logger Interface
2
A Connect the USB end of the IFC203 Interface to the
corresponding port on your PC. The blue LED will illuminate when
the device has plugged in an successfully recognized by the
computer.
The installation of the USB data logger interface is now complete.
Start the MadgeTech Data Logger Software. (If necessary, see the
software manual for additional information on the software)
B Start the MadgeTech Data Logger Software. (If necessary, see the
software manual for additional information on the software)
C Your device(s) will appear in the list displayed, select your device
in this list and choose your desired start method. (The red LED
flashes when data is being sent and the green LED flashes when
data is being received.)
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com