MAEN Greenwich 38 User manual

ABOUT THE GREENWICH 38 AUTOMATIC
CERTIFIED SWISS MADE
OVERVIEW
SETTING THE MAEN GREENWICH 38 AUTOMATIC
USING THE GMT
CARING FOR YOUR GREENWICH 38 AUTOMATIC
WARRANTY
USING YOUR WATCH
USER GUIDE
SERVICE

Before being worn for the rst time, or if it has stopped, a MAEN watch must be
wound manually in order to function correctly and precisely. To wind the watch man-
ually, turn it several times clockwise. (Turning in the other direction has no effect.)
A minimum of 25 turns is required for adequate partial winding.
The watch will then be wound automatically as long as it is worn on the wrist.
Wearing the watch for the rst time
USER GUIDE

The Greenwich is the perfect travel watch with its GMT function and comfortable
rubber Tropic strap.
The dial offers very good legibility due to the oversized hour indicators. At night, the
watch is also a pleasure to look at due to the Swiss Super-LumiNova with superior
Grade X1 quality.
The Greenwich has an elegant, but at the same time very powerful appearance. The
case design is based on our Hudson and is also 38mm in diameter. There are some
obvious differences though. First of all the Greenwich has a step up bezel with alter-
nating brushed and polished effects. The overall brushing is also more prominent.
Next to that the crown is oversized and the case has lug holes.
The Greenwich 38 Automatic GMT

The Greenwich GMT Automatic is assembled in La Chaux-de-Fonds , Switzerland.
Waterproof testing, entrance inspection and nal quality control will also be per-
formed in Switzerland.
The Swiss Made SwissTech S24-045 movement will be in-house regulated and each
individual movement will be passing tests to certify the precision of the movement.
The Swiss Made label is a representation of the ultimate sign of quality - the perfect
combination of function and design.
Certied Swiss Made

Greenwich 38 Automatic Overview
HOUR HAND
MINUTE HAND
SECONDS HAND
GMT HAND
CROWN
1
2
3
4
5
DATE WINDOW
6

1
3
2
6
4
5

SCREWED-DOWN POSITION (POSITION 0):
the crown is completely screwed down
against the case. When the crown
is in this position, the Greenwich Automatic
is guaranteed waterproof to a depth of
10ATM = 100 metres (330 feet).
MANUAL WINDING (POSITION 1):
The crown is unscrewed. To wind the
watch manually, turn the crown
clockwise; turning in the other direction has no
effect.
When setting the watch
for the rst time or after the watch
has stopped, complete a minimum of
25 turns for partial winding.
Setting your Greenwich 38 Automatic

0 1 2 3
To screw the crown back down against
the case, return it to position 1 and
apply light pressure on it while screw-
ing it down clockwise against the case.
After every use, carefully screw the crown
back down against the case to guarantee
the waterproofness. The crown should
never be unscrewed under water.
UNSCREW THEN PULL OUT

SETTING THE DATE (POSITION 2):
the crown is unscrewed and pulled out
to the rst notch. To set the date, turn the
crown counter-clockwise. Turning the crown
clock wise will set the GMT hand.
SETTING THE TIME (POSITION 3):
the crown is unscrewed and pulled out to the
second notch. The seconds hand is stopped,
allowing you to set the time to the precise
second. To set the hour and minute, turn the
crown in either direction. To avoid confusion
between a.m. and p.m. hours, move the hour
hand to 12 o’clock. If the date changes, it is
midnight.
Avoid changing the date after setting the time
in a counterclockwise direction between 4
p.m. and 10.30 p.m.
Setting the date and GMT

0 1 2 3
To screw the crown back down against
the case, return it to position 1 and
apply light pressure on it while screw-
ing it down clockwise against the case.
After every use, carefully screw the crown
back down against the case to guarantee
the waterproofness. The crown should
never be unscrewed under water.
UNSCREW THEN PULL OUT

You can help preserve its lustre by cleaning it occasionally with a microbre cloth. If
you require any service on your watch, please make sure to send in a request via our
website and we will make sure to have your watch serviced and restored to original
condition.
Caring for your Greenwich Automatic

Warranty term: Two year from the date of purchase. This warranty covers manufacturing defects on the watch
itself (movement, case, crystal). Other parts than the above are not covered by this warranty. To have replacement
covered under this warranty performed, please use our contact form on the “contact us” page. In the e-mail you
need to specify your name, address, order number and a detailed description of the issue at hand. Finally, write
‘reclaim of purchase’ as subject of the e-mail and mail. Note that repair/replacements will be charged in the
following cases, even during the warranty term.
• Failure or damage caused by improper use or carelessness (knocks, dents, crushing, broken crystal, etc.)
• Failure or damage caused by unjustiable repair or modication
• Failure or damage caused by re or water, or a natural disaster such as for example an earthquake
• Esthetic changes that occur during normal wear and tear and aging (minor scratches, etc.; on the case and/
or cystal, alteration of the colour on the wristband and the peeling of the plating)
• In case the retail store and the purchase date are not indicated on the warranty, or if this information has
been rewritten
The case, dial, hands, crystal, watchband or other parts thereof may be replaced with substitutes if the originals
are not available. This warranty warrants that you can receive free replacement in accordance with the terms set
forth herein and within the specied term, and shall not restrict any lawful right of the Customer.
Any damage caused due to the modication of the watch is not covered by our warranty. Only if the modication
is arranged and executed directly via our service center the original warranty will be maintained.

WWW.MAENWATCHES.COM