Bypassed zones remained unarmed when the
partition is armed.
1. Press the [BYP] key.
2. Enter your [ACCESS CODE]‡.
3. The corresponding zone number will be
displayed on the screen when open. Select the
zone(s) you want to bypass by entering the
two-digit zone number. For example, to enter
zone 3, enter [0] then [3]. The corresponding
zone indicator will flash.
4. To save and exit, press [ENTER].
A Chime Enabled zone will advise you every time it is
opened by causing your keypad to beep.
1. Press & hold the []key. The word ‘Chime’
appears on the screen.
2. Select the zones you want to Chime by
entering the two-digit zone number. The
corresponding zone number flashes. For
example, to chime zone 2 enter [0] then [2].
The keypad automatically saves once the 2-
digit zone number is entered.
3. To save and exit, press [ENTER].
BYPASS PROGRAMMING CHIME PROGRAMMING
© Paradox Security Systems Ltd., 2008. Magellan is a
trademark or registered trademark of Paradox Security
Systems Ltd. and its affiliates in Canada, the United
States and/or other countries. All rights reserved.
PARADOX.COM
Printed in Canada 05/2008 K32IRF-EQ00
To send a silent or audible alarm to your monitoring
station, press and hold one of the following
combinations for 3 seconds.
1. Press the [TBL] key. The word ‘Trouble’ and
the number(s) corresponding to the trouble(s)
are displayed on the screen.
2. Read the corresponding explanation of the
trouble from the trouble list in the MG/SP User
Guide. If no repair instructions are given, call
your security company for repairs.
3. To exit, press [CLEAR].
\
To view the alarms that occurred during the last
armed period:
1. Disarm the system.
2. Press the [MEM] key.
3. The corresponding zone numbers that were in
alarm the last time the system was armed will
appear on the screen.
4. To exit, press [CLEAR].
To mute the keypad:
Press and hold the [CLEAR]key for 10 seconds
to enable or disable Keypad Muting.
To adjust the backlight level:
1. Press and hold the [S] key for 4 seconds.
2. Keys [1] and [2] flash.
3. Press [1], then use the [S] and [T] to adjust.
4. To save and exit, press [CLEAR] or [ENTER].
To adjust the backlight delay:
1. Press and hold the [S] key for 4 seconds.
2. Keys [1] and [2] will flash.
3. Press [2], then use the [S] and [T] to adjust.
4. To save and exit, press [ENTER].
PANIC ALARMS
Panic Alarm Type Button Combinations
Police
Medical
Fire
Press [1] & [3]
Press [4] & [6]
Press [7] & [9]
TROUBLE DISPLAY
ALARM MEMORY DISPLAY
KEYPAD SETTINGS
