Magic Chef MCWC52B User manual

2
3
4
5
5
7
7
9
10
Wine Coole
r
. Changing The Reversible Door . . . . . . . . . . . . . . . . . .
Model No. MCWC52B
Wine Coole
r
. Before Putting Into Use . . . . . . . . . . . . . . . . .
. Description of the Appliance . . . . . . . . . . . . . . .
CAUTION:
Read and follow all safety rules and operating
instructions before first use of this product.
. Important . . . . . . . . . . . . . . . . . . . . . . . .
. Placing and Installation . . . . . . . . . . . . . . . . .
. Temperature Control . . . . . . . . . . . . . . . . . . .
. Maintenance and Cleaning . . . . . . . . . . . . . . . .
. Wine Cooler Warranty . . . . . . . . . . . . . . . . . .
. Trouble Shooting Guide . . . . . . . . . . . . . . . . .

oF to 66.2 oF.
2
Tips for Energy Savings
Important . . . . . . . . . . . . . . . . . . . .
.
3
Disposing of Worn Out Appliances
Placing and Installation . . . . . . . . . . . .
.
4
Choosing the Right Place
Placing the Self-standing Appliance
Connection to Power Supply
Description of the Appliance . . . . . . . . . . . .
5
Temperature Control . . . . . . . . . . . . . .
5
Temperature Selection
Illustration of the Appliance
Maintenance and Cleaning . . . . . . . . . . . . .
7
A
utomatic Defrosting of the appliance
Cleaning of the Appliance
Switch Off the Appliance When Not In Use
Trouble-Shooting Guide . . . . . . . . . . . . . .
.
7
Changing The Reversible Door . . . . . . . . . .
.
9
W
ine Cooler Warranty . . . . . . . . . . . . . . . 10
W
ine Cooler
SAVE THESE INSTRUCTIONS
range of 5.5to 19.0/ 41.9
Thank you for buying this appliance.
We hope it will successfully serve your requirements for many years.
This appliance is intended for storing bottled wine in the temperature
Before Putting Into Use . . . . . . . . . . . . .
Instructions for Use
1

··
poor, energy consumption is substantially
··
·Tips, otherwise the energy consumption is
substantially higher.
They describe the appliance and correct operating
·
·
·
·
2
In case the interior accessories are not correctly
placed, rearrange them as described in chapter
Before connecting the appliance to electrical
power supply, leave it to stand for about 2 hours,
which will reduce the possibility of malfunctions
in the cooling system due to transport handling.
"Description of the Appliance".
If the gasket is damaged or the door seal is
Before Putting Into Use
the gasket.
higher. To restore efficiency, replace
Always consider instructions stated in
sections Positioning and Energy Saving
Clean the appliance thoroughly, especially in the
interior (See Cleaning and Maintenance).
Instructions for Use
These instructions for use are intended for the user.
procedures for safe use .
SAVE THESE INSTRUCTIONS:
Tips for Energy Saving
Try not to open the door too often, especially when
the weather is hot and humid. Once you open the
door , close it as soon as possible. This is
especially important if you have an upright model .
Every now and then check if the appliance is
sufficiently ventilated ( adequate air circulation
behind the appliance ).
Set the thermostat from higher to lower settings as
soon as possible (depends on how loaded the
appliance is, ambient temperatures etc.).
Ice and frost layers increase energy consumption,
so clean the appliance as soon as the frost layer
is 3-5mm thick.

·
·
·
·
·
·
·Always disconnect the appliance from the
power supply before cleaning the appliance,
or attempting repairs.
WARNING:
.Repairs should be performed by qualified
service personnel only.
·Do not defrost the appliance with other electric
appliances (for example a hair dryer) and
never attempt to scrape/remove ice/frost with
sharp objects.
·The cooling system of the appliance is filled
with refrigerant and oil ,so when the appliance
is damaged, handle it with care and dispose
of it in compliance with environmental
protection safeguards.
·The rating plate containing Model No and
other technical data specific to this unit, is
located either inside the appliance or outside
on the rear wall.
To avoid risk of child entrapment, leave the
The appliance must be properly connected to
Do not use an extension cord.
Important
routine use or not in use at home.
shelves in place so children can not easily
climb inside even when the appliance is in
to Power Supply) .
an electrical power supply. (See: Connection The cooling system of the appliance is filled with
3
If you have bought this appliance to replace
it impossible for children to accidentally lock
an old one equipped with a door lock that
cannot be opened from the inside (lock, bolt),
make sure that the lock is removed, disabled
or destroyed before discarding. This will make
themselves inside the appliance and suffocate.
distributor. Be careful not to damage the tubes on
the rear wall of the appliance (danger of pollution).
refrigerant and insulating substances which should
to locate one, contact your local authorities or your
be separately treated and processed. Call your
nearest authorised service agent. If you are unable
Disposing of Worn Out
Appliances
- Leave the shelves in place so children may not
easily climb inside.
DANGER OR WARNING: Risk of child entrapment.
Before you throw away your old refrigerator or
freezer:
-Take off the doors

4
Placing and Installation
to assure adequate ventilation. There should be
4in. between both sides of the cooler and other
article.
electric shock by providing a path of least
resistance for electric current. This appliance
is equipped with a power cord having an
grounding conductor. The plug must be
plugged into an appropriate wall outlet
that is installed and wired in accordance
CHOOSING THE RIGHT PLACE
Place the appliance in a dry and regularly
ventilated room. Never place the appliance near
heat emitting devices (e.g. cooking appliances,
radiators, water heaters or similar devices) and
do not expose to direct sunlight.
The appliance should be positioned at least 2in.
CONNECTION TO POWER
SUPPLY
appliances have adjustable feet on the front side;
away from electric or gas cooking appliances
and at least 12in. away from oil or coal fired
stoves. If this is not possible, use an appropriate
insulation barrier.
Behind the appliance there should be a free space
of at least 3in. . Kitchen units (cupboards) should
be at least 2in. away from the appliance in order
WIRING INSTRUCTIONS
For your personal safety, this appliance must
be grounded. In the event of a malfunction or
breakdown, grounding will reduce the risk of
WARNING
Instructions to avoid to the risk of fire ,
electric shock , or injury to persons.
with all existing local codes and ordinances.
Consult a qualified electrician or serviceman
if the wiring instruction are not clearly
understood, or if doubt exists as to whether
use them to level the appliance.
on the rating plate (inside the unit or on the
exterior rear wall of the unit).
to a properly grounded wall outlet. The required
nominal voltage and frequency are indicated
Place the appliance firmly on a solid base. Some
INSTALLATION
Connect the appliance power cord and plug
the appliance is properly grounded.

A
djustable Wine Shelves
Shelves can be optionally placed on the guides
inside the appliance where appropriate. Perishable
items should be stored towards the back/rear of the
shelves, i.e. the coldest part of the shelf.
Defrost Water Outle
t
The interior of the appliance is cooled with a
cooling plate mounted in the rear wall. Under the
plate there is a channel and an outlet for defrost
water. Regularly check the defrost water outlet
and the drain channel for blockage. They should
always be kept free and clean of particles.
To turn the control to the "OFF" position, rotate the
control knob to the "0" position. If the appliance
has been left out of use for some time, set the
control to maximum or the "7" position for 2-3
hours before turning to the desired position. If the
appliance is not being used for long time periods,
The temperature will vary depending on the disconnect the plug and leave the door partially
with which the door is opened.
5
Description of the appliance
To start the appliance turn the temperature control
knob to the position corresponding to the desired
W
E RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO EFFECT
ON THE OPERATION OF THE APPLIANCE.
Temperature Control
The temperature of the appliance is controlled by setting the thermostat knob to a
desired setting.
Temperature Selection
page 6.
The temperature control knob is illustrated on
cooling.
quantity of the item stored and on the frequency open. This will help to reduce mold/mildew from
accumulating inside the appliance cabinet.
Warning: Never set the temperature control to maximum or "7" position for more than 8 hours.

.
.
.
1.
2.
3.
4.
6
Tight fitting door seal keeps all the cooling
Temperature in the appliance also depends on how often the door is opened.
THERMOSTAT DIAL:
level.
setting of the thermostat knob).
yet power supply is not interrupted.
Allows easy interior visibility.
PLASTIC COATED SHELVES:
Odor resistant, rustproof, and removable
for easy cleaning.
DOOR SEAL:
power locked inside. No hooks or latches.
TEMPERED GLASS DOOR & INTERIOR LIGHT:
Changes in ambient room temperature will affect the internal temperatures (choose correct
For controlling the temperature inside the
wine cooler. Turns the motor on as soon as
the temperature rises above the desired
ILLUSTRATION OF THE APPLIANCE
In STOP (0) position the appliance does not operate (cooling system is switched off ),
TEMPERATURE CONTROL KNOB

Clean the exterior with water and detergent.
interior of the appliance and clean with water and
liquid detergent. Plastic parts cannot be washed
Wash the interior of the appliance with lukewarm
water , adding one or two spoonfuls of vinegar.
After cleaning, connect the appliance to power
situated above the compressor, from where it Switch Off the Appliance
evaporates. When Not In Use
If you do not intend to use the appliance for long
periods of time. Set the thermostat knob to the
STOP (0) position, disconnect the power supply,
take out the contents and defrost and clean the
appliance. Leave the door slightly open.
.Sometimes you may come across minor problems
that in most cases do not require a service call
and can be easily eliminated. The problem may
have resulted from improper handling and / or
installation of the appliance. Please refer to the
below trouble-shooting guide to assist you in .Check the power cord is properly connected.
identifying the possible cause and solution to your .Check the power supply in the electrical outlet.
problem. Should the problem still persist after (blown fuse / circuit breaker) .
completing these checkpoints, contact the closest .Make sure the appliance is switched on.
authorized service agent in your area for assistance. (thermostat knob in operating position)
7
supply and reload it.
There is no need to defrost the cooler , because
ice depositing on the inner back wall is defrosted
the appliance.
Disconnect the power supply before cleaning
Ice build-up on the inner back wall during the
Cleaning the Appliance
Do not use coarse or aggressive cleaning
automatically.
compressor operation will defrost automatically
The Appliance Fails to
Operate After Connecting to
Electrical Power Supply
outlet in the inner back wall into a drain pan
Maintenance and Cleaning
Trouble-Shooting Guide
Automatic Defrosting of the
Appliance
agents as you may damage the surface.
Remove the detachable accessories in the
(when the compressor has cycled off) . Defrost
water will drain out passing through the drain
in dishwashers.

The door is frequently opened or left open for If the discharge water outlet is clogged, or the
too long. defrost water drips over the channel, water will
The door is not properly closed (the door may leak from the appliance.
sag, the gasket may be polluted or damaged). .Clean the clogged outlet.
Perhaps you may have overloaded the appliance. .Manually defrost the increased ice layer ( see
The reason may be inadequate ventilation of the ice Formation on the Inner rear Wall ).
compressor (assure adequate air circulation).
Noise
Cooling in this appliance is made possible by
cooling the system using a compressor, which
will produce certain noise levels. How noisy
A
s long as the defrost water runs to the the appliance is depends on where it is placed,
channel and through the outlet to the drain how it is used and how old the appliance is.
pan on the compressor, automatic defrosting .During the operation of the compresso
r
of the appliance is assured. the noise of the liquid is heard and when the
In case the ice formation on the inner back compressor is not operating, the refrigerant flow
wall is increased (1/8-1/5in.), ice should be is heard. This is a normal condition and it has
manually defrosted. no influence whatsoever on the lifetime of the
Set the thermostat knob to STOP ( 0 ) appliance.
position and leave the door open. Never .
A
fter starting the appliance, the
use electric devices for defrosting and do operation of the compressor and the refrigerant
not scrape the ice or frost layer with sharp flow may be louder, which does not mean that
objects. something is wrong with the appliance and it has
no influence on the lifetime of the appliance.
A
fter defrosting is complete, turn the knob to Gradually the noise will reduce.
desired position and close the door. The .Sometimes unusual and loude
r
noise
cause of increased ice formation may be may be heard. This noise is often a
one of the following: consequence of inadequate installation.
the door does not seal well (clean the _The appliance must be level and installed on
gasket if it is contaminated, or replace it if a firm solid base/floor.
it is damaged); _The appliance should not touch the wall or
the door is frequently opened or left too kitchen units standing next to it.
long; _Check the accessories on the interior of the
the food stored in the appliance was warm; appliance, they should be placed correctly in
the food or dish is touching the inner back their positions; also check bottles, tins, and
wall. other vessels are not touching each other
causing rattling and/or vibrations.
8
Continuous Operation of the
Cooling System
Ice Formation on the
Inner Rear Wall
Water is Leaking From the
Appliance

Changing The Reversible Door
CAUTION: To avoid personal injury to yourself
and/or property, we recommend someone
assist you during the door reversal process.
(The unit is delivered with the door on the right side. The
following is an example describing steps to change the
door to the left side. To change the door back to the
right side, do the similar steps but on opposite side.)
1. Remove the top hinge assembly and keep them for
future use.
2. Remove the bottom hinge assembly and keep them
for later use.
3. Remove the plug buttons from the upper left holes
and transfer them to the uncovered holes at the
right side. Be sure to press the plug buttons
firmly into the holes.
4. Re-install the bottom hinge assembly previously
removed in step 1 onto the opposite side.
5. Re-install the bottom hinge assembly previously
removed in step 2 onto the opposite side.
6. Make sure the door assembly is properly aligned on
the cabinet before tightening the screws.
The process is now complete.
9

MC Appliance Corporation warrants each new Wine Cooler to be free from defects in material
and workmanship and agrees to remedy any such defect or to furnish a new part(s) (at the company’s
option) for any part(s) of the unit that has failed during the warranty period. Parts and labor expenses
are covered on this unit for a period of one year after the date of purchase. In addition MC Appliance
Corporation warrants the compressor (parts only) to be free from defects in material and
workmanship for a period of 5 years. The consumer is responsible for all labor and transportation
expenses related to the diagnosis and replacement of the compressor after the initial one- year
warranty expires. If in the event the unit requires replacement or refund under the terms of this
warranty the consumer is responsible for all transportation expenses to return the unit to our factory
prior to receiving a replacement unit or refund. A copy of the dated sales receipt / invoice is
required to receive warranty service.
This warranty covers appliances in use within the continental United States, Puerto Rico and Hawaii.
The warranty does not cover the following:
. Damages due to shipping damage or improper installation.
. Damages due to misuse or abuse.
.Content losses due to failure of the unit.
. Inside components such as door panels, door shelves, racks, light bulbs etc…
. Punctures to the evaporator system due to improper defrosting of the unit.
. Repairs performed by unauthorized service agents.
. Service calls that do not involve defects in material and workmanship such as instruction on proper
use of the product, door reversal or improper installation.
. Replacement or resetting of house fuses or circuit breakers.
. Failure of this product if used for other then its intended purpose
This warranty is in lieu of all warranties expressed or implied and no representative or person is
authorized to assume for us any other liability in connection with the sale of this product. Under no
circumstances is the consumer permitted to return this unit to the factory without prior written
consent from MC Appliance Corporation.
Model Parts Labor Compressor (Part Only) Type of Service
MCWC52B One-Year One-Year Five Years In Home
For Service or Assistance please call 888 775-0202 or visit us on the web at
www.magicchef-ewave.com
10
W
ine Cooler Warranty