Magic Play FLY O'CLOCK User manual

FLY O’CLOCK
Operation Manual (v1.2)
Software version: 1.0.141
MAGIC PLAY SP Z O.O.
CHOCIMSKA 6, 62800 KALISZ, POLAND
Phone/Fax: [phone]. e-mail: [e-mail]
website: www.magicplay.pl
Serial number:______________________________________________________
Distributor:_________________________________________________________
Date:______________________________________________________________

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
1
TABLE OF CONTENTS
Important Safety Instructions
1. PACKAGE CONTENTS
2. SPECIFICATIONS
3. SET UP & INSTALATION
3.1. MARQUEE ASSEMBLY
3.2. DEVICE AND MOST IMPORTANT ELEMENTS
3.3. LEVEL ADJUSTMENT
3.4. PLAY ZONE
3.5. TRANSPORTING THE GAME
3.6. CONNECTING THE POWER
4. ACTIVATION, UPDATE AND GAMEPLAY
4.1. SOFTWARE UPDATE
4.2. GAMEPLAY
5. GAME OPTIONS
5.1. MENU ACCES AND NAVIGATION
5.2. SERVICE MENU
6. ELECTRICAL DIAGRAM
7. MAINTENANCE, INSPECTION
7.1. SAFETY CHECK
8. TROUBLESHOOTING
8.1. SYSTEM MICROSD CARD LOCATION.
8.2. „NO SIGNAL” ALERT ON SCREEN
8.3. BLACK SCREEN WITHOUT COMMUNICATES
8.4. PROBLEMS WITH TICKET DISPENSING, GAME CRASHING/FREEZING, SETTINGS ARE NOT SAVED
8.5. PROBLEMS WITH COIN ACCEPTORS/BILL ACCEPTORS
8.6. BUTTONS/COINS MECH NOT WORKING
8.7. GAME EXITING AFTER SPLASHSCREEN WITHOUT ERROR OR „SENTINEL KEY NOT FOUND” ALERT
8.8. MICROSD card repair for Windows OS
9. PARTS LIST
10. TERMS OF WARRANTY

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
2
Thank You for purchasing FLY O‘CLOCK . We hope you enjoy the product. The manual contains valuable
information about how to operate and maintain your game machine properly and safetly. It is intended for
the owner and/ or personnel in charge of product operation. Carefully read and understand the
instructions.
If you need any help during instalation and setup please utilize this manual and troubleshooting guide. If
the product fails to function properly, non-technical personnel should under no circumstance sttempt to
service the machine. Contact your distributor or manufacturer for help.
READ BEFORE USE
INSPECT IMMEDIATELY AFTER TRANSPORTING THE PRODUCT
After receiving the shipment, inspect the product thoroughly to ensure that it has been shipped with care.
Before turning the power on, please check the following:
• Check the cabinet for damage or shifting that may have occurred during shipping. Are there any dented
portions or defects (cuts, etc.) on the external surfaces of the cabinet?
• Are all the legs and adjusters/levelers/feet intact?
• Do the power supply voltage and frequency requirements meet with those of the location (110V/220V)?
• Are all wires linked correctly and securely connected to each other? If coupled in an incorrect manner,
the connection will not be made accurately and it could cause not only irreparable damage to the machine,
but also is a potential fire hazard. DO NOT INSERT CONNECTORS FORCIBLY.
• Check that the all the cables, including power cables, are undamaged. Do power cables or other wires
have any splices, cuts, or dents?
• Have you been provided with all of the associated accessories?
• Can all doors/lids be opened with the accessory keys? Can doors/lids be firmly closed? Does the coin box
key open the coin box(es)?
1. PACKAGE CONTENTS
Open the package and make sure all the items are included:
1 x Body Assembly
Following accessories
No.
Name
Qty.
Note
1
Marquee set
1
2
Marquee mounting screws
4
3
Keys
3 sets
4
User’s manual
1
5
Bill acceptor cover
1
6
Coin acceptor cover
1
If any items are found missing, please contact your sales representative for help immediately.
NOTE: Part models are subject to change without notice.

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
3
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and understand these
instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recomended may cause fire,
electric shock or personal injury. Unplug the game from the outlet when not in use, when moving from one
location to another, and before cleaning/servicing.
Explanations witch require special attention are indicated by signs of warning. Depending on the potential
hazardous degree, the terms: NOTE, NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE inticades potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal injury.
It is important to understand the meaning of the following HAZARD SIGNS befor contuning:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.
Do Not Touch Hazard:
This may be hot or can cause electric shock.
Do not touch.
Use the following safety guidelines to help ensure your own personal safety and to help protect your
equipment and surrounding enviroment from potential damage.

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
4
THIS PRODUCT IS AN INDOOR MACHINE ONLY!
DO NOT INSTALL OUTDOOR!
Avoid installing in the following places to prevent fire, electric shock, injury and/ or
machine malfunctioning:
Places subject to rain/ moisture, or places subject to high humidy.
Places subject to direct sunlight, or places subject to extremely hot or cold temperatures to
ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly inflammable/
volatile chemicals or items that can easly catch fire
On unstable or sloped surfaces. The machine may topple or cause unforeseen accidents.
Vicinty of fire exist, fire extinguishers.
WARNING!
Non-technical personnel who do not have technical knowledge and experience
should refrain from performing such work that this manual require or preform
tasks which are not explained in this manual. Failing to comply can cause severe
accidents such as electric shock or other serious injuries.
WARNING: To reduce the risk of fire, electric shock or personal injury, unplug or
disconnect the machine from the power supply before servicing.
2. SPECIFICATIONS
Rated power supply: 110 - 240V
Dimensions: 115 x 68 x 294cm
Weight: 200Kg
NOTICE: After turning off the game, please wait at least 1 minute before restarting again.
Inspect Immediately after Transporting the Product After receiving the shipment, inspect the product
thoroughly to ensure that it has been shipped with care. Before turning the power on, please check the
following:
Check the cabinet for damage or shifting that may have occurred during shipping. Are there any
dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
Are all the legs and adjusters/levelers/feet intact?

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
5
Do the power supply voltage and frequency requirements meet with those of the location
(110V/220V)? Are all wires linked correctly and securely connected to each other? If coupled in an
incorrect manner, the connection will not be made accurately and it could cause not only
irreparable damage to the machine, but also is a potential fire hazard. DO NOT INSERT
CONNECTORS FORCIBLY.
Check that the all the cables, including power cables, are undamaged. Do power cables or other
wires have any splices, cuts, or dents?
Have you been provided with all of the associated accessories?
Can all doors/lids be opened with the accessory keys? Can doors/lids be firmly closed? Does the
coin box key open the coin box(es)?
3. SETUP & INSTALLATION
Refer to IMPORTANT SAFETY INSTRUCTIONS for places to avoid
Place the unit on dry level surface
Ventilation openings in the back of the unit must not be obstructed by objects or by wall.
3.1 MARQUEE ASSEMBLY
1.
2.
3.
4.

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
6
3.2 DEVICE AND IMPORTANT ELEMENTS
1. marquee
2. “bells”
3. display cover
4. 55” LED display
5. speakers
6. game panel with control buttons
7. tickets out
8. coin-bill acceptor
9. front service door - access to coin and bill acceptors,
tickets feeder, mechanical counters and service button
10. marquee base
11. upper back door –acces to display and marquee
12. lower back door –acces to CPU board, I/O board and
power supply
13. power socket
3.3 LEVEL ADJUSTMENT
Install this machine on flat surface. Adjust levers to lift casters off the ground to level the game.
If the game is installed on an unstable floor, it could cause a malfunction.

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
7
To fix the game, adjust the leveler down until it touches the floor, lifting the casters off the ground by
5mm. Repeat the same for all levelers.
NOTICE
Make sure the machine is level with the ground and all the adjustable legs stick to floor
closely.
3.4 PLAY ZONE
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon instalation:
Service area: 50cm
Play area: 100cm
3.5 TRANSPORTING THE GAME
If you need to move the game, adjust the levelers back to an „up“ position so the casters touch the
ground.
NOTICE
Be careful not to damage the machine durning transport.
The machine should be handled with care when brining it down from a high level.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, packkage the game properly to prevent damages
3.6 CONNECTING POWER
IMPORTANT!
POWER SUPPLY ADJUSTS AUTOMATICALLY
Machines electrical system (power supplys and display) will adjusts automatically to 230V or 115V
voltage.
Do not plug the equipment power cables into an electrical outlet if the power cable is damaged.
Avoid putting many loads on one electrical outlet as it could generate heat the fire resulting from
overload.

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
8
Connect the grounding conductor to the earth terminal
(GND):
Ensure that nothing rests on the power cord and that it
is not located where it can be stepped on or tripped
over.
To disconnect the game, grip the plug and pul lit from
the wall outlet. Never pull by the cord.
To prevent electric shock, do not touch the power plug
when hand is wet.
4. ACTIVATION, UPDATE AND GAMEPLAY
IMPORTANT!
DEVICE SOFTWARE IS COPYRIGHT PROTECTED. COPYING AND DISTRIBUTION IS
STRICTLY PROHIBITED. IT IS ALSO FORBIDDEN TO INTERFERE IN THE INTEGRITY OF
SOFTWARE THROUGH MODIFICATION OR IMPLEMENTATION OF ANY CHANGES
WITHOUT APPROVAL OF THE MANUFACTURER. ANY ATTEMPTS OF SOFTWARE
CHANGES, OTHER THAN THOSE SPECIFIED BY THE MANUFACTURER MAY RESULT IN
WARRANTY LOSS.
4.1. SOFTWARE UPDATE
To carry out software upgrade memory stick and USB computer
mouse is required.
1. Download .apk file provided by manufacturer/distributor and
save it to a memory stick.
2. Open the lower rear service door and locate the CPU board
(see picture)
3. Connect the memory stick and a computer mouse in free USB
ports. Disconnect one of USB plugs if not enought USB ports are
available. Remember to plug it back after update process!
4. Leave the Fly O’Clock application by clicking the right mouse
button. Tip: Game will propably exit after disconnecting one of
USB plugs in 3rd step.

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
9
5. Click on SERVICE_ON app(see
picture), confirm by clicking
Execute on confirmation pop-up
to run machine in Service Mode
(wait for restart and Leave again
Fly O’Clock app). Now you are in
service mode, the screen is fitted
in to the game clock.
6. Go to application list in
bottom center of the screen
7. Click on FILE MANAGER app
icon
8. Click on 3 parallel lines in left
top corner to see disks listing
9. Select your USB storage from
list
10. Locate and click the
downloaded .apk file
11. Click INSTALL in the right
bottom corner of the screen
12. Wait for installation
complete. It may take a while.
13. App updated, click on the
circle at the bottom of the
screen to back to machine
desktop.
14. Run SERVICE_OFF app,
confirm by clicking Execute on
pop-up to leave Service Mode.
Machine will reboot. Meanwhile
disconnect USB mouse and flash
drive, connect disconnected
USB plugs in 3rd step. Done!
4.2 GAMEPLAY
Single player game
To start the game insert coin into coin acceptor or banknote into bill validator. Press the JUMP button to start the
game. Instructions for players who are playing for the first time appears on the screen. You can skip this
information by pressing the JUMP button. After the countdown, you can start the game. Push JUMP button to
jump around the clock. Avoid the clock hands. Every jump loads progress bar around the clock. Load the bar to 3,
6 and 9 o’clock to start TICKET FIESTA. In this mode clock hands are not moving and you get a ticket for every
jump. Get to 12 o’clock for massive TICKET BONUS

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
10
5. GAME OPTIONS
5.1 MENU ACCES AND NAVIGATION
To acces menu press SERVICE/ENTER button, located in service door, at the lower front of the machine,
next to the coin and ticket counters.
Use UP/PREVIOUS and DOWN/NEXT buttons to navigate in the menu. Use SERVICE/ENTER to ENTER or
CHANGE the option value or selection.
IMPORTANT!
REMEMBER THAT CHANGES IN THE SERVICE MENU CAN RELATE TO ELEMENTS SUCH AS
THE COST OF THE GAME AND THE NUMBER OF WON TICKETS, AND WHICH MAY
AFFECT THE EARNINGS OF THE DEVICE. MAKE SURE THAT THE CHANGES AND ENTERED
VALUES ARE VALID.

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
11
MAIN MENU
GAME VER. X.X.XXX
Check software version
DEVICE SETTINGS
MUSIC VOLUME
0-100
Set music volume from 0 to 100
SOUND EFFECTS VOLUME
0-100
Set sound volume from 0 to 100
BACK
Return to main menu
CREDITS SETTINGS
FREE PLAY
ON/OFF
Free play, no credits needed
ACCEPTOR TYPE
SINGLE/DUAL
Dual or single coin acceptor support.
PAYMENT TYPE
COIN/BILLS
Changes the credit type. This will change the in-
game text accordingly.
BILLS FOR CREDIT
Set credis value
COINS FOR CREDIT
Set credits value
BACK
Return to main menu
TICKETS SETTINGS
TICKETS ON/OFF
ON/OFF
TICKET VALUE
1, 2
Set ticket value - for tickets with double value
BIG WIN
100-1000
Set ticket bonus
MERCY TICKETS
1-100
Consolation tickets issued when a player wins
nothing
BACK
Return to main menu
GAMEPLAY SETTINGS
FIESTA TIME 1
5-15 s
Set length of first fiesta in seconds
FIESTA TIME 2
5-15 s
Set length of second fiesta in seconds
FIESTA TIME 3
5-15 s
Set length of third fiesta in seconds
BACK
Return to main menu
DIFFICULTY SETTINGS
FIESTA SPEEDUP 1
1.0 –3.0
Clock hands speed after first Fiesta
FIESTA SPEEDUP 2
1.0 –3.0
Clock hands speed after second Fiesta
FIESTA SPEEDUP 3
1.0 –3.0
Clock hands speed after third Fiesta
BACK
Return to main menu
STATISTICS
COUNTERS
TICKETS WIN TOTAL
Total amount of won tickets
TICKETS ISSUED TOTAL
Total amount od issued tickets
NUMBER OF GAMES
Number of all played games
TICKETS WIN P1
Tickets won by Player 1
TICKETS WIN P2
Tickets won by Player 2
TICKETS ISSUED P1
Tickets issued for Player 1
TICKETS ISSUED P2
Tickets issued for Player 2
CREDITS TOTAL
Total credits
CREDITS P1
Player 1 credits
CREDITS P2
Player 2 credits
RESETABLE COUNTERS
CREDITS TOTAL
Total credits
TICKETS ISSUED P1
Tickets issued for Player 1
TICKETS ISSUED TOTAL
Total amount od issued tickets
CREDITS P1
Player 1 credits
TICKETS ISSUED P2
Tickets issued for Player 2
TICKETS WIN P2
Tickets won by Player 2
CREDITS P2
Player 2 credits
TICKET WIN TOTAL
Total amount of won tickets
GAMES
Number of all played games
BACK
Return to main menu
LOGS AND STATS
AVG TWO PLAYER DURATION
Avarage length of two player game
AVG SINGLE PLAYER JUMPS
Avarage number of jumps in single player game
AVG TWO PLAYERS JUMPS
Avarage number of jumps in two players game
AVG SINGLE PLAYER TICKET WIN
Avarage number of tickets won in single players
game
AVG SINGLE PLAYER DURATION
Avarage length of single player game
AVG SINGLE PLAYER TICKET WIN
Avarage number of tickets won in single players
game
MERCY TICKETS
Mercy tickets won
TICKETS FOR BONUS
Tickets bonus won
BACK
Return to main menu
BACK
Return to main menu
TESTS
TICKETS TO DISPENSE
1-100
Set number of dickets to dispense
P1 DISPENSE 10 TICKETS
Dispens tickets in P1 dispenser
P2 DISPENSE 10 TICKETS
Dispens tickets in P2 dispenser
DIAGNOSTICS: AUDIO
Audio tes
DIAGNOSTICS: LCD
Display test
DIAGNOSTICS: LIGHTS
Lights test
DIAGNOSTICS: LED_WHEEL
LED wheel test
BACK
Return to main menu
EXIT
Exit menu

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
12
6. ELECTRICAL DIAGRAM

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
13
7. MAINTENANCE, INSPECTION
7.1 SAFETY CHECK
Check the points listed before operating the machine. These checks are nessessary for safe machine
operation:
1. Try to run the game before operation each day.
2. Conduct monthly routine checks of game components to ensure good working condition
3. Check the machine regularly for dust and clean when nesessary.
Note : Parts and components require preventative maintenance to be kept running smoothly
8. TROUBLESHOOTING
8.1 SYSTEM MICROSD CARD LOCATION
The MicroSD card is located at back of CPU board, near top-right installation screw. It is possible to pull it
without CPU board disassembly. See picture.
CPU board front view
CPU board back view
8.2 „NO SIGNAL” ALERT ON SCREEN
1. Observe CPU board placed behind bottom rear service door when
machine is plugged in.
RED LED light:
Solid: 5V power is on: OK
Blinking: Problems with power supply, check power supply (2nd point)
or wiring connections or CPU board failure atleast.

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
14
No red LED light: No 5V power. Check power supply, check power supply voltage, check wirings and
connections. CPU board failure is not common but possible.
BLUE light:
Solid RED LED light is required to see BLUE LED status!
Solid or no blue LED light: MicroSD Card/software failure. Put backup MicroSD card provided with machine
and check results. There is a posibility to write image on old MicroSD card if it is not physically damaged.
Blinking: Normal operating state –everything seems to be ok with CPU board software.
2. Check two power supplies placed behind bottom rear service door.
Solid green LED signal means: Everything is ok.
Blinking green LED signal means: Power supply failure.
a) Too low power load due disconnected some components of the machine
b) Short circuit in installation
No green LED signal means:
a) Power supply failure
b) No power on supply cables
8.3 BLACK SCREEN WITHOUT COMMUNICATES
1. Check screen power plug
2. Check if the screen is turned ON:
Open big rear service door and check POWER LED signal.
Solid RED: means that TV is turned off (sometimes it could happen). If you see RED LED signal, click by the
nearest button to turn it on(see picture) or use porovided tv remote.
No LED: Screen is ON and it working properly. Check input source using tv remote. Or no power
supplied/screen failure.
3. Check CPU board (1st step of „No signal alert on screen”)

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
15
8.4 PROBLEMS WITH TICKET DISPENSING, GAME CRASHING/FREEZING, SETTINGS ARE
NOT SAVED
Caution: This will erase your game settings/electrical counters and stats! Game will need to be configured
if default settings does not fit your requirements
1. Open the lower rear service door, locate the CPU board (see picture) and plug USB mouse.
2. Leave the Fly O’Clock application by clicking the right mouse
button. Tip: Game will propably exit after disconnecting one of USB plugs in 3rd step.
3. Click on SERVICE_ON app (see picture), confirm by clicking Execute on confirmation pop-up to run
machine in Service Mode (wait for restart and Leave again Fly O’Clock app).
Now you are in service mode, the screen is fitted in to the game clock.

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
16
6. Go to application list in bottom center of the screen
7. Select Settings
8. Select „Apps“
9. Find and click on Fly O’Clock application

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
17
10. Click „CLEAR DATA“
11. App refreshed, click on the circle at the bottom of the screen to back to machine desktop.
12. Run SERVICE_OFF app, confirm by clicking Execute on pop-up to leave Service Mode. Machine will
reboot. Meanwhile disconnect USB mouse. Game need to be configured.
8.5 PROBLEMS WITH COIN ACCEPTORS/BILL ACCEPTORS
1. Possible problems with acceptors firmware
2. Check wirings for acceptors
3. Not accepted permission to acces USB device for I/O board (see „Buttons/coins not working”)

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
18
8.6 BUTTONS/COINS MECH NOT WORKING
1. Check wiring connections to I/O board
2. If new CPU board, I/O board or LED driver connected you will be asked to confirm USB Access
permission to USB device. Check everything as described on picture below. Check use by default → click
OK. Often three times this pop-up occur.
3. If You accidently press CANCEL after selecting checkbox for „Use default...“ follow steps from (Problems
with ticket dispensing, game crashing/freezing, settings are not saved) and addicionally click CLEAR
DEFAULTS at step 10! Run Fly O’ Clock from desktop and follow step 2 from this section.
8.7 GAME EXITING AFTER SPLASHSCREEN WITHOUT ERROR OR „SENTINEL KEY NOT
FOUND” ALERT
1. Check your USB Dongle licence key!

FLY O’CLOCK - USER’S MANUAL
www.magicplay.eu
19
8.8 MICROSD CARD REPAIR TUTORIAL for Windows OS
1. Download Win32 Disk Imager (link)
https://sourceforge.net/projects/win32diskimager/files/Archive/Win32DiskImager-0.9.5-
binary.zip/download
2. Extract downloaded program
3. Select extract location and click extract
4. Insert Micro SDCard (8GB SDHC Class 10) from your CPU board or new into your card reader and run
Win32DiskImager
5. Select provided image file and select proper device letter (CPU board Micro SD card)