Magnadyne Multi-Charger Pro User manual

FRONT
Service Card- Initial Setup
Multi-Charger Pro Universal Charging Station
Size: W: 5.5” x H: 8.75”
Black Type
White Background
Back-Up Battery
LED power indicator
Clock
Positive (+)
Side Up
Turning the Clock On/Off:
Press the power button to turn the Clock On/Off.
You will see the Digital Clock Display turn on.
Adjusting Minutes:
1. Press and hold button for 3 seconds until
minutes FLASH.
2. Press button again to adjust minutes.
Connecting the Power Supply
Plug the power supply connector into the Multi-Charger Pro Universal Charging Station. Plug the
power supply into the wall socket. The green LED power indicator will now be lit.
Note: Maximum Input 5V/1A.
Installing the Back-up Battery
1. Remove the Back-up Battery cap.
2. Insert the battery paying attention to the
- and + indicators on the battery.
3. Reinstall the battery cap.
Clock
Adjusting Hours:
1. Press and hold button for 3 seconds until
hour numbers FLASH.
2. Press button again to adjust hours.
12:00
Drawing Number
Part Number
Description: Description RevDateAppr
R
Drawn
GG 3-23-09
Sheet
1 of 2
Project Number
0961
Service Card for
MC-PRO-XXX Universal
Charging Station
MC-PRO-XXX
03230903
This drawing and the
information in it are the
property of Magnadyne
Corporation and cannot
without prior written
permission be reproduced,
copied, or disclosed in any
manner.
Initial Release
A
BY
Service Card- Initial Setup
Drawing Number
Part Number
Description:
R
Drawn
GG
Sheet
2 of 2
Project Number
0961
Service Card for
MC-PRO-XXX Universal
Charging Station
MC-PRO-XXX
03230903
This drawing and the
information in it are the
property of Magnadyne
Corporation and cannot
without prior written
permission be reproduced,
copied, or disclosed in any
manner.

© Copyright 2009
Magnadyne Corporation
MC-PRO-UM/IM
Rev. A 2-23-09
USB Port
*USB cable
not provided
*
BACK
Multi-Charger Pro Universal Charging Station
Connectors:
Step 3
Plug-in the device or devices
to charge.
Note: If both device’s batteries are
fully drained, intially connect and
charge only one device. After
20-30 minutes the second device
can be connected and charged.
Step 2
Feed the plugs through the lid.
Note: Maximum 2 plugs.
Step 1
Locate desired plug or plugs.
If your phone’s charging cable
uses a standard USB connector,
use the USB port provided.
10 Connectors + 1 USB Port
- iPod / iPhone
- LG
- Micro USB / Various Brands
- Mini USB / Various Brands
- Samsung - 2
- Samsung - 1
- Sony Ericsson
- Treo
- Nokia Small Barrel
- SCI Barrel Sprint/Verizon
Service Card- Initial Setup
Drawing Number
Part Number
Description:
R
Drawn
GG
Sheet
2 of 2
Project Number
0961
Service Card for
MC-PRO-XXX Universal
Charging Station
MC-PRO-XXX
03230903
This drawing and the
information in it are the
property of Magnadyne
Corporation and cannot
without prior written
permission be reproduced,
copied, or disclosed in any
manner.