Magnavox MAS-100/37 User manual

1
8240 009 34231
SMART. VERY SMART.
User guide
MINI HI-FI STEREO SYSTEM
Read this manual first!
Congratulations on purchasing this Magnavox product.
We’ve included everything you need to get started.
If you have any problems, Magnavox Representatives can
help you get the most from your new product by explaining:
• Hookups,
• First Time Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-705-2000
Thank you for making Magnavox a part of your home!
S
E
E
W
H
Y
I
N
S
I
D
E
I
M
P
O
R
T
A
N
T
!
Return
your Warranty
Registration Card
within 10 days
MAS-100

2
8240 009 34231
Canada
English:
This digital apparatus does not exceed
the Class B limits for radio noise
emissions from digital apparatus as set
out in the Radio Interference
Regulations of the Canadian
Department of Communications.
Français:
Cet appareil numérique n'emet pas
de bruits radioélectriques dépassant
les limites applicables aux appareils
numériques de Class B prescrites dans
le Règlement sur le Brouillage
Radioélectrique édicté par le Ministère
des Communications du Canada.
CAUTION
Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.
ATTENTION
L'utilisation des commandes ou
réglages ou le non-respect des
procédures ci-incluses peuvent se
traduire par une exposition
dangereuse à l'irradiation.
ATENCIÓN
El uso de mando o ajustes o la
ejecucción de métodos que no sean
los aquí descritos puede ocasionar
peligro de exposición a radiación.
CAUTION
:INVISIBLE
LASER RADIATION
WHEN OPEN. DO NOT STARE INTO BEAM.
DANGER
:
INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.
VARO!
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET
ALTTIINANAKYMATTOMAALLE LASERSATEILYLLE. ALA
KATSO SATEESEEN.
VARNING!
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.
OCH SPARREN AR URKOPPLAD. BETRAKTA EJ STRÅLEN.
DANGER - Invisible laser radiation when open.
AVOID DIRECT EXPOSURE TO BEAM.
or
This warning label is located on the rear side
and inside this laser product.

3
8240 009 34231
MINI HIFI STEREO SYSTEM
CD / CD-R/
CD-RW COMPATIBLE
DECK 1 DECK 2
FULL AUTO STOP
PLAYBACK•RECORD
3 CD DIRECT PLAY
PLAYBACK
CONTINUOUS PLAY
1
2
4
3
5
6
7
8
9
0!
#
@
$
%
^
&
*
STANDBY-ON
OPEN•CLOSE
CD
DISC
CHANGE DIGITAL SOUND
CONTROL
DSC
DYNAMIC
BASS BOOST
TUNER TAPE
CD 1 CD 2 CD 3
SEARCH/
TUNING
SEARCH/
TUNING
DEMO STOP
FM•AM TAPE 1•2
▲
PREV•PRESET
▲
NEXT•PRESET
CLOCK•TIMERPROGRAM DIM
3CD
CHANGER
VOLUME
DBB
3
2
4
(
3
%
^
7
8
™
¡
%
£
2
)
#

4
8240 009 34231
• Once your Magnavox purchase is
registered, you’re eligible to receive all
the privileges of owning a Magnavox
product.
• So complete and return the Warranty
Registration Card enclosed with your
purchase at once, and take advantage
of these important benefits.
Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
Warranty
Verification
Registering your product
within 10 days confirms
your right to maximum
protection under the
terms and conditions of
your Magnavox warranty.
Owner
Confirmation
Your completed Warranty
Registration Card serves
as verification of owner-
ship in the event of prod-
uct theft or loss.
Model
Registration
Returning your Warranty
Registration Card right
away guarantees you’ll
receive all the information
and special offers which
you qualify for as the
owner of your model.
This “bolt of lightning” indi-
cates uninsulated material
within your unit may cause
an electrical shock. For the safety of
everyone in your household, please do
not remove product covering.
The “exclamation point” calls
attention to features for
which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
WARNING: TO PREVENT
FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
CAUTION: To prevent electric
shock, match wide blade of plug to
wide slot, and fully insert.
For Customer Use
Enter below the Serial No. which is locat-
ed on the rear of the cabinet. Retain this
information for future reference.
Model No. _______________________
Serial No. ________________________
MAC5097
Know these
s
s
a
a
f
f
e
e
t
t
y
y
symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

5
8240 009 34231
Congratulations on your purchase,
and welcome to the “family!”
Dear Magnavox product owner:
Thank you for your confidence in Magnavox.You’ve selected one of the
best-built, best-backed products available today.And we’ll do everything in
our power to keep you happy with your purchase for many years to come.
As a member of the Magnavox “family,”you’re entitled to protection by
one of the most comprehensive warranties and outstanding service net-
works in the industry.
What’s more, your purchase guarantees you’ll receive all the information
and special offers for which you qualify, plus easy access to accessories
from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment
to your total satisfaction.
All of this is our way of saying welcome –and thanks for investing in a
Magnavox product.
Sincerely,
Lawrence J. Blanford
President and Chief Executive Officer
P.S. Remember, to get the most from your Magnavox product,
you must return your Warranty Registration Card within
10 days. So please mail it to us right now!
R
E
G
I
S
T
R
A
T
I
O
N
N
E
E
D
E
D
W
I
T
H
I
N
1
0
D
A
Y
S
Hurry!
Visit our World Wide Web Site at http://www.magnavox.com

6
8240 009 34231
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near
water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with
the manufacturer´s instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the
safety purpose of the
polarized or
grounding-type plug.
A polarized plug has two blades with one
wider than the other. A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer or sold with
the apparatus.When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15. Battery usage CAUTION –To
prevent battery leakage which may result in
bodily injury, property damage, or damage
to the unit:
●Install all batteries correctly, +and -as
marked on the unit.
●Do not mix batteries (old and new or
carbon and alkaline, etc.).
●Remove batteries when the unit is not used
for a long time.
EL 6475-E004: 02/8
IMPORTANT SAFETY INSTRUCTIONS
AC Polarized
Plug
Class II equipment symbol
This symbol indicates that the unit has
a double insulation system

7
English
Français
Español
8240 009 34231
English ------------------------------------------------ 8
Index
Français -------------------------------------------- 33
Español --------------------------------------------- 59

8
English
8240 009 34231
Contents
General Information
Supplied accessories ............................................ 9
Environmental information ................................ 9
Safety information ................................................ 9
Preparations
Rear connections ........................................ 10–11
Power
Antennas connection
Speakers connection
Inserting batteries into the remote control . 11
Controls
Controls on the system and remote
control .................................................................. 12
Basic Functions
Plug and Play ........................................................ 13
Demonstration mode ........................................ 14
Switching the system on ................................... 14
Switching the system to standby mode ........ 14
Dim mode ............................................................ 14
Volume control ................................................... 14
Sound control ..................................................... 15
DSC (Digital Sound Control)
DBB (Dynamic Bass Boost)
CD Operation
Discs for playback .............................................. 16
Loading discs ....................................................... 16
Playing discs ......................................................... 17
Selecting a desired track/passage .................... 17
Replacing discs during playback ...................... 17
Repeat and Shuffle ....................................... 17–18
Repeat play
Random play
Programming the disc tracks ........................... 18
Erasing the program .......................................... 18
Radio Reception
Tuning to radio stations .................................... 19
Storing preset radio stations .................... 19–20
Automatic preset programming
Manual preset programming
Tuning to preset radio stations ....................... 20
Erasing a preset radio station .......................... 20
Tape Operation/Recording
Loading tape ........................................................ 21
Playing tapes ........................................................ 21
Rewinding/Fast forwarding ............................... 22
General information on recording ................. 22
Preparation for recording ................................ 22
One touch recording ......................................... 22
CD Synchronized start recording .................. 22
Dubbing tapes ..................................................... 23
Maintenance.............................................. 23
Clock/Timer
View clock ............................................................ 24
Clock setting ....................................................... 24
Timer setting ................................................ 24–25
Deactivating the timer
Activating the timer
Sleep timer setting ............................................. 25
Specifications ........................................... 26
Troubleshooting ............................. 27–28

9
English
8240 009 34231
General Information
This system complies with the FCC rules,
Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two
conditions:
–This device may not cause harmful
interference, and
–This device must accept any interference
received, including interference that may
cause undesired operation.
Supplied accessories
– 2 speaker boxes
– remote control
– AM loop antenna
– FM wire antenna
Environmental information
All unnecessary packaging has been omitted.We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Safety information
●Before operating the system, check that the
operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) of your system is identical with the
voltage of your local power supply. If not, please
consult your dealer.
●Place the system on a flat, hard and stable
surface.
●Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
●Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
●The lens may cloud over when the system is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the system in the warm environment until
the moisture evaporates.
●The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
●When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.

10
English
8240 009 34231
Preparations
R
+
–
L
speaker
(right)
speaker
(left)
FM wire antenna
AM loop
antenna
A
B
C
+–
AC power cord
Rear connections
The type plate is located at the rear of the
system.
APower
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
–For optimal performance, use only the
original power cable.
–Never make or change any connections
with the power switched on.
BAntennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
AM Antenna
Fix the claw
to the slot
●Position the antenna as far as possible from aTV,
VCR or other radiation source.

11
English
8240 009 34231
Preparations
FM Antenna
1
2
●For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
CSpeakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker to
"L", colored (marked) wire to "+" and black
(unmarked) wire to "-".
1
2
●Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
–For optimal sound performance, use the
supplied speakers.
–Do not connect more than one speaker to any
one pair of + / - speaker terminals.
–Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Inserting batteries into the
remote control
Insert two batteries type R03 or AAA (not
supplied) into the remote control with the
correct polarity as indicated by the "+" and
"-" symbols inside the battery compartment.
CAUTION!
–Remove batteries if they are exhausted
or will not be used for a long time.
–Do not use old and new or different
types of batteries in combination.
–Batteries contain chemical substances, so
they should be disposed off properly.
Notes for remote control:
–First select the source you wish to control
by pressing one of the source select keys on
the remote control (for example CD 1/2/3,
TUNER).
–Then select the desired function (for
example É , í , ë ).

12
English
8240 009 34231
Controls (illustrations on page 3)
Controls on the system and
remote control
1STANDBY ON y
– to switch the system on or to standby mode.
2TAPE (TAPE 1/2)
– to select tape mode.
3TUNER (FM•AM)
– to select waveband : FM or AM.
4CD 1 / CD 2 / CD 3 (CD 1/2/3)
– to select disc tray 1, 2 or 3.
5CD OPEN/CLOSE
– to open or close the disc tray.
6DISC CHANGE
– to change disc(s).
7DIGITAL SOUND CONTROL (DSC)
– to select the desired sound effect :
JAZZ, ROCK,TECHNO or OPTIMAL.
8DYNAMIC BASS BOOST (DBB)
– to select the desired bass boost level.
9PROGRAM
for CD ................. to program disc tracks.
forTuner ............. to program preset radio stations.
for Clock ............ to select 12- or 24-hour clock
mode.
forTimer ............. to select CD program mode as
the wake up source.
0Tape deck 1 operation
â.......................... to start recording.
É.......................... to start playback.
à/ á............... to rewind or fast forward.
70 ........................ to stop playback/recording or to
open the tape door.
Å.......................... to interrupt playback or
recording.
!Tape deck 2 operation
É.......................... to start playback.
à/ á............... to rewind or fast forward.
70 ........................ to stop playback or to open the
tape door.
Å.......................... to interrupt playback.
@CLOCK•TIMER
– to view the clock, set the clock or set the timer.
#DIM
– to select different brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM OFF.
$n
– to connect headphones.
%MASTER VOLUME 3 4 (VOL +/-)
– to increase or decrease the volume.
^Mode Selection
PLAY•PAUSE ÉÅ
for CD ................. to start or interrupt playback.
for Plug & Play…(on the system only) to initiate
and start plug & play mode.
SEARCH/TUNING àá
for CD ................. to search backward/forward.
forTuner ............. to tune to a lower or higher
radio frequency.
for Clock ............ (on the system only) to set the
hour.
STOP•CLEAR / DEMO STOP Ç
for CD ................. to stop playback or to clear a
program.
forTuner ............. (on the system only) to stop
programming or to erase a
selected preset.
for Demo ........... (on the system only) to activate/
deactivate the demonstration.
for Clock ............ (on the system only) to exit clock
setting or cancel timer.
for Plug & Play…(on the system only) to exit plug
& play mode.
PREV í/ NEXT ë(PRESET 4/ 3)
for CD ................. to skip to the beginning of the
current, previous, or next track.
forTuner ............. to select a preset radio station.
for Clock ............ (on the system only) to set the
minute.
&Display screen
– to view the current status of the system.
*Disc tray
(REPEAT
– to playback track(s)/disc(s)/program repeatedly.
)MUTE
– to interrupt or resume sound reproduction.
¡SHUFFLE
– to playback all available discs and their tracks/
program in random order.
™SLEEP
– to activate/deactivate or set the sleep timer.
£B
– to switch the system to standby mode.

13
English
8240 009 34231
Basic Functions
3 CD DIRECT PLAY
STANDBY-ON
OPEN•CLOSE
CD
DISC
CHANGE DIGITAL SOUND
CONTROL DYNAMIC
BASS BOOST
CD 1 CD 2 CD 3
SEARCH/
TUNING
SEARCH/
TUNING
FM•AM TAPE 1•2
CLOCK•TIMERPROGRAM DIM
TUNER TAPE
DSC
DEMO STOP
2
PREV•PRESET
▲▲
NEXT•PRESET
VOLUME
DBB
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Plug and Play
Plug and Play allows you to store all available
radio stations automatically.
First time setup/power up
1When you turn on the main power, "AUTO
INSTALL - PRESS PLAY" is displayed.
2PressÉÅ on the system to start installation.
➜"INSTALL" is displayed, followed by "TUNER"
and "AUTO".
➜PROG starts flashing.
➜All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by AM band.
➜When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To reinstall Plug and Play
1In Standby or Demonstration mode, press and
holdÉÅ on the system until "AUTO INSTALL
- PRESS PLAY" is displayed.
2PressÉÅ again to start installation.
➜All previously stored radio stations will be
replaced.
To exit without storing the Plug and Play
●Press Çon the system.
➜If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main power again.
Notes:
–When the power is turned on, the disc tray may
open and close to initialize the system.
–If no stereo frequency is detected during
Plug and Play, "CHECK ANTENNA" will be
displayed.
–During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.

14
English
8240 009 34231
Demonstration mode
The system has a demonstration mode that
shows the various available features.
To activate the demonstration
●In standby mode, press and holdÇon the
system until "WELCOME" is displayed.
➜The demonstration will begin.
To deactivate the demonstration
●Press and holdÇon the system until
"DEMO OFF" is displayed.
➜The system will switch to standby mode.
Note:
–If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to standby mode.
Switching the system on
In standby/demonstration mode
●Press STANDBY ON to switch on the last
selected source.
●Press CD 1/2/3, TUNER or
TAPE (TAPE 1/2).
●Press CD OPEN/CLOSE.
➜The system will switch to CD mode.
Switching the system to standby
mode
In demonstration mode
●Press and hold Çon the system.
In any other source mode
●Press STANDBY ON (or Bon the remote
control).
➜The clock will appear on the display when the
system is in standby mode.
Dim mode
You can select the desired brightness for the
display.
●In any source mode (except standby mode),
press DIM repeatedly to select : DIM 1, DIM 2,
DIM 3 or DIM OFF.
➜DIM is shown, except for DIM OFF mode.
DIM
mode
1
2
3
OFF
Brightness
normal
half
half
normal
Spectrum
Analyzer
off
on
off
on
Note:
–In standby mode, pressing DIM to select half or
full brightness for clock display.
Volume control
Press MASTER VOLUME 3or 4 (VOL +
or -on the remote control) to increase or
decrease the volume level.
To listen through the headphones
●Connect the headphones plug to
the nsocket at the front of the
system.
➜The speakers will be muted.
To switch off the volume temporarily
●Press MUTE on the remote control.
➜Playback will continue without sound and
"MUTE" is displayed.
●To restore the volume, press MUTE again or
increase the volume level.
Basic Functions

15
English
8240 009 34231
Sound control
DSC (Digital Sound Control)
The DSC feature enables you to enjoy special
sound effects that have preset equalizer settings,
which provide improved music reproduction.
●Press DSC to select : JAZZ, ROCK,TECHNO or
OPTIMAL.
➜The selected DSC is shown.
DBB (Dynamic Bass Boost)
There are three DBB settings to enhance the
bass response.
●Press DBB repeatedly to select a bass boost
level.
➜“DBB 1 (or 2/3)” and the respective bass
boost level are shown.
To deactivate DBB
●Press DBB repeatedly until ““DBB OFF” is
displayed.
Note:
–Some discs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce the
volume.
Automatic DSC-DBB selection
The best DBB setting is generated automatically
for each DSC selection. You can manually select
the DBB setting that best suits your listening
environment.
DSC
JAZZ
ROCK
TECHNO
OPTIMAL
DBB
off
on (3)
on (3)
on (2)
Basic Functions

16
English
8240 009 34231
CD Operation
IMPORTANT!
–This system is designed for regular discs.
Therefore, do not use any accessories such
as disc stabilizer rings or disc treatment
sheets, etc., which may jam the changer
mechanism.
–Do not load more than one disc into
each tray.
Discs for playback
This system can playback all digital audio CD,
finalized digital audio CD-Recordable (CDR)
discs and finalized digital audio CD-Rewritable
(CDRW)discs.
Loading discs
1Press CD OPEN/CLOSE to open the disc
tray.
2Load up to two discs on the individual disc trays.
To load the third disc, press DISC CHANGE.
➜The disc tray will rotate until the empty tray
is ready for loading.
3
CD CHANGER
CLOCK
.
TIMER
VOLUME
DEMO
PRESET TUNING
SHUFFLE
TIMER
PLAY
MODE
SIDE
SETCLOCK
TIMERSET
BAND
RECORD
DUBBING
CD TAPE
PROGRAM
CLEAR
RDS
MODE
1
2
3
TIMER
DBB
PROGRAM
AMPM
SHUFFLE
FMMW
LWSW
STEREO
NR
FRONT
BACK
RECORD
HSD
2
2
1
OPEN•CLOSE
1
3Press CD OPEN/CLOSE to close the disc
tray.
➜"READING" is displayed. The selected disc
tray, total number of tracks and the playing time
will appear on the display.
Notes:
–Load the discs with the label side facing up.
–To ensure good system performance, wait until
the disc tray completely reads the disc(s) before
proceeding.
3 CD DIRECT PLAY
STANDBY-ON
OPEN•CLOSE
CD
DISC
CHANGE DIGITAL SOUND
CONTROL DYNAMIC
BASS BOOST
CD 1 CD 2 CD 3
SEARCH/
TUNING
SEARCH/
TUNING
FM•AM TAPE 1•2
CLOCK•TIMERPROGRAM DIM
TUNER TAPE
DSC
DEMO STOP
2
PREV•PRESET
▲▲
NEXT•PRESET
MINI HIFI STEREO SYSTEM
CD / CD-R/
CD-RW COMPATIBLE
3CD
CHANGER
VOLUME
DBB

17
English
8240 009 34231
CD Operation
Playing discs
a disc is loaded in the disc tray
the current selected disc tray is empty
the current selected disc tray is loaded
or playing
To play all discs on the disc tray
●PressÉÅ.
➜All the available discs will play once, then stop.
➜During playback, the selected disc tray, track
number and elapsed playing time of the current
track are displayed.
To play the selected disc only
●In CD mode, press CD 1, CD 2 or CD 3 on
the system.
➜The selected disc will play once, then stop.
To interrupt playback
●PressÉÅ.
➜The current track time flashes.
●To resume playback, pressÉÅagain.
To stop playback
●Press Ç.
Selecting a desired track/passage
To search for a particular passage during
playback
●Press and hold àor áand release it when
the desired passage is located.
➜During searching, the volume will be reduced.
To select a desired track
●Press íor ërepeatedly until the desired
track is displayed.
●If playback is stopped, pressÉÅ to start
playback.
Note:
–In Shuffle mode, pressing í will cause the
player to skip only to the beginning of the current
track.
To skip to the beginning of the current
track during playback
●Press íonce.
Replacing discs during playback
1Press DISC CHANGE.
➜The disc tray will open without interrupting
current playback.
2To change the inner disc, press DISC
CHANGE again.
➜"DISC CHANGE" is displayed and the disc
will stop playing.
➜The disc tray will close to retrieve the inner
disc, then reopen with the inner disc accessible.
Repeat and Shuffle
You can select and change the various play
modes before or during playback.
Repeat play
1Press REPEAT on the remote control
repeatedly to select :
➜"TRACK" – to repeat playback of the current
track.
➜"DISC" – to repeat playback of the current
disc.
➜"ALL" or "PROGRAM" – to repeat playback of
all available discs or programmed tracks.
2To resume normal playback, press REPEAT
until "REPEAT OFF" is displayed.
➜REP is shown, except for REPEAT OFF mode.
Random play
1Press SHUFFLE on the remote control.
➜SHUF is shown and "SHUFFLE" is displayed.
➜All the available discs or programmed tracks
(if program is active) will be played in random
order.
2To resume normal playback, press SHUFFLE
again.
➜SHUF disappears.

18
English
8240 009 34231
Notes:
–During program play or shuffling mode, it is not
possible to repeat playback for the current disc
(Repeat Disc mode).
–Pressing the CD OPEN/CLOSE button will cancel
all repeat and shuffling modes.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1Load the desired discs on the disc tray (refer to
“Loading discs”).
2Press PROGRAM to start programming.
➜PROG starts flashing.
3Press CD 1/2/3 to select a disc.
4Press íor ërepeatedly to select the desired
track.
5Press PROGRAM to store the track.
●Repeat steps 3–5to store other discs and
tracks.
6To end programming, press Çonce .
➜PROG stays and the program mode remains
active.
➜The total number of tracks programmed and
the total playing time are displayed.
7To start program play, pressÉÅ.
➜"PLAY PROGRAM" is displayed.
Notes:
–If the total playing time is more than "99:59"
or if one of the programmed tracks has a number
greater than 30, then "--:--" is displayed
instead of the total playing time.
–If you attempt to program more than 40 tracks,
"FULL" is displayed.
–During programming, if no button is pressed
within 20 seconds, the system will exit the Program
mode automatically.
To review the program
●Stop playback and press íor ërepeatedly.
●To exit review mode, press Ç.
Erasing the program
●Press Çonce when playback is stopped or
twice during playback.
➜PROG disappears and "PROGRAM CLEARED"
is displayed.
Note:
–The program will be erased when the system is
disconnected from the power supply or when the
disc tray is opened.
For Recording, please refer to “Tape
Operation/Recording”.
CD Operation

19
English
8240 009 34231
Radio Reception
Tuning to radio stations
1Press TUNER to selectTUNER mode.
➜"TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
➜If an FM station is received in stereo, is
displayed.
2Press TUNER again to select the desired
waveband : FM or AM.
3Press and hold àor áuntil the frequency
indication starts to change, then release.
➜The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
4Repeat step 3if necessary until you find the
desired radio station.
●To tune to a weak station, press àor ábriefly
and repeatedly until optimal reception is found.
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
Automatic Preset Programming
●Plug and Play setting (refer to “Basic Functions -
Plug and Play”).
OR
1Press TUNER to selectTUNER mode.
To begin automatic preset from a desired
preset number
●Press íor ëto select the desired preset
number.
➜If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
2Press and hold PROGRAM until "AUTO" is
displayed.
➜PROG starts flashing.
➜All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by AM band.
➜When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To stop storing the automatic preset
●Press PROGRAM or Çon the system.
Note:
–If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
3 CD DIRECT PLAY
STA ND B Y- O N
OPEN•CLOSE
CD
DISC
CHANGE DIGITAL SOUND
CONTROL DYNAMIC
BASS BOOST
CD 1 CD 2 CD 3
SEARCH/
TUNING
SEARCH/
TUNING
FM•AM TAPE 1•2
CLOCK•TIMERPROGRAM DIM
TUNER TAPE
DSC
DEMO STOP
2
PREV•PRESET
▲▲
NEXT•PRESET
VOLUME
DBB

20
English
8240 009 34231
Manual Preset Programming
1Tune to your desired radio station (refer to
“Tuning to radio stations”).
2Press PROGRAM.
➜PROG starts flashing.
➜The next available preset number is displayed
for selection.
To store the radio station to another
preset number
●Press íor ëto select the desired preset
number.
3Press PROGRAM again to store the radio
station.
➜PROG disappears.
●Repeat steps 1–3to store other radio stations.
To exit manual preset mode
●Press Çon the system.
Notes:
–If you attempt to store more than 40 preset
radio stations, "FULL" is displayed.
–During programming, if no key is pressed within
20 seconds, the system will exit the Program mode
automatically.
Tuning to preset radio stations
●Once you’ve programmed the radio stations,
press íor ëto select the desired preset
number.
➜The preset number, radio frequency, and
waveband are displayed.
Radio Reception
Erasing a preset radio station
1Press íor ëto select the preset radio station
to be erased.
2Press and hold Çon the system until “PRESET
DELETED” is displayed.
➜The deleted radio frequency remains on the
display.
➜The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.
●Repeat steps 1–2to erase other preset radio
stations.
For Recording, please refer to “Tape
Operation/Recording”.