Magnetic Days OPTICAL REMOTE CONTROL User manual

OPTICAL REMOTE CONTROL
Optical Sensor
right side left side
OVERVIEW AND SETTING
Functional LED
In case of cabled RPM sensor, insert
the cable into the remaining USB
socket.
USB sockets
for Oprical
Keys and RPM
Sensor.
POSITIONING
Apply the device on the handlebar of the bicycle with
the O-Ring in a convenient position.
(see back page)
CONNECTION WITH MAGNETICDAYS
Plug the Optical Key cable into one of the two USB
sockets of the smart trainer ( 1° or 2° starting from
the bottom).
REMOTE CONTROL
Occlude the right or left optical windows for about 2
seconds to adjust (+/-) the workloads.
EN
DON’T USE
the third slot

POSITIONING
The correct positioning of the device on the handlebar is important for the successful operation of the
optical sensor.
Apply the Optical Keys in the recommended position 1 or 2.
POSITION 1 | SUPERIOR
IMPORTANT The device must be positioned at a
forward angle so that it doesn’t interfere with the
sensor.
POSITION 2 | LATERAL
The device must be placed in a position that is
accessible but doesn’t obstruct the position of
your hands on the handlebar.
WARNING
Pay particular attention to avoid cove-
ring the sensors with objects or your
body during the workout.
It may cause interference and there-
fore a malfunction of the connection
to the platform.
OPTICAL REMOTE CONTROL
EN