Mahli MDB-90 Manual

Instruction Guide
MDB-90
Himalayan
Salt Wax Warmer

Warning
To reduce risk of electric shock, and to ensure safe and proper use, read all safety
information before using the device.
• THIS IS NOT A TOY, Please keep away from children and pets.
• Follow all instructions. Heed all warnings.
• For indoor use only.
• Only use with manufacturer-approved accessories, and supplies.
• Do not expose the unit to extreme temperatures (heat or cold), open ames, humid
conditions, or wet conditions.
• Keep away from rain and moisture. Do not submerge in water.
• Never operate or handle the product or plug with wet hands.
• Clean only with a dry cloth.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. When the provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs
convenience receptacles, and the point where they exit from the apparatus.
• Unplug during lightning storms or when unused for long periods of time.
• Do not open or attempt to repair the unit yourself should it not be working.
• Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged or wires are exposed; liquid has been spilled or objects have fallen into the
apparatus; the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
• WARNING: The mains plug is used as a disconnect device; the disconnect device shall
remain readily operable.
• WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to
rain or moisture. The apparatus shall not be exposed to dripping or splashing, and
objects lled with liquids, such as vases, shall not be placed on apparatus.
• This equipment is a Class II or double-insulated electrical appliance. It has been
designed in such a way that it does not require a safety connection to electrical earth.
Before You Begin...
CAUTION: RISK OF
ELECTRIC SHOCK
The lightning bolt symbol
is a warning alerting you
to risk of electric shock
CAUTION: RISK OF
DANGER
The exclamation point
symbol is a warning to
alert you to risk of danger
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT ATTEMPT TO OPEN
OR REPAIR UNIT. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
CAUTION
READ CAREFULLY AND KEEP THIS MANUAL
IMPORTANT SAFETY INSTRUCTIONS

Caution
• CAUTION: Lamp becomes hot to touch. Do NOT move the warmer, or touch the wax
warmer or wax while the wax is melted. Power OFF and allow the wax warmer and wax
to cool down completely before handling the wax warmer. Failure to follow these
instructions can result in burn or injury.
• Do not use appliance for other than intended use.
• Do not operate unattended.
• Do NOT put ngers or hands into the product.
• Keep out of reach of children and pets. Children should not be left unsupervised near
this product. This unit is not to be used by children or any person(s) with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge unless
they have been given express supervision and instruction.
• Never add water to wax.
• Some wax may overow while melting. Watch carefully.
Additional Precautions and Warnings
• Always turn o and unplug when not in use or before maintenance.
• Keep away from direct sunlight, heat sources, air conditioners, and fans.
• Always keep on a stable, at surface. Do NOT place on a carpet, bed, cushion or other
non-at, non-stable surface.
• Keep away from electronic equipment.
• Never move the product while in use.
• Surface temperature is hot. Do not allow hot wax warmer to come into contact with
skin.
• Keep the power cable clear of pathways, and do not forcefully pull or remove from the
unit.
• To disconnect, grip plug and pull from wall outlet. Never pull on cord to disconnect.
• If smoke or burning smell is detected, immediately unplug the unit.
• It is recommended, if the product will not be in use for a long period of time, that the
wax warmer be covered to protect it from exposure to dust.
• The amount and intensity of aroma produced will vary. Factors that aect production
of aroma can include humidity, temperature, and/or air current. Do not use outdoors.
NORTH AMERICAN MODELS WITH POLARIZED PLUGS:
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to
t into a polarized outlet only one way. If the plug does not t
fully into the outlet, reverse the plug. If it still does not t, contact
a qualied electrician. Do not attempt to modify the plug in any
way. If the plug ts loosely into the AC outlet or if the AC outlet
feels warm, do not use that outlet.

Getting Started
In the Box
• MDB-90 - Wax Warmer (x1) • Himalayan Salt (450 g)
• Lavender Wax Cubes (1.25 oz) • 25W Incandescent Bulb (x1)
• Wax Warming Tray (x1) • Instruction Manual (x1)
Setup
Carefully remove the item from its packaging and place onto a level,
stable surface. Make sure the light bulb is screwed in and not damaged.
1. Slide the glass cover over the light bulb. This is to protect the light bulb
from the himalayan crystals.
2. Carefully
place the
included
himalayan
crystals
around the
glass cover.
1
2
3
3. Place the lamp cover
onto the lamp base
and plug into an
electrical outlet.
Use
Once plugged in, place a piece of the included scented wax onto the
lamp cover bowl.
Turn the inline
power switch
until it clicks. The
light will turn on
and warm up the
lamp cover,
causing the wax
to melt and
disperse aroma.
CAUTION: The cover of the lamp can get extremely HOT, handle with caution. When
finished, LET THE LAMP COOL for ~15 minutes before handling. Do NOT heat any
nonwax materials with this lamp. Do NOT heat the wax in a separate apparatus and
place onto the lamp cover bowl. This can damage the lamp.
DO NOT HEAT THE LAMP COVER BY ANY MEANS OTHER THAN THE LIGHT FROM THE
LAMP. This can damage the lamp.
Power
on

Compliance Information
FCC Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modications not expressly approved could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Information
This device has been evaluated to meet general RF exposure requirements. The device can be used in portable
exposure conditions without restriction.
Rating Label Denitions
The ETL Mark is proof of product compliance to North American safety
standards. Authorities Having Jurisdiction (AHJs) and code ocials across
the US and Canada accept the ETL Listed Mark as proof of product
compliance to published industry standards.
CM
US
C
LISTED
Intertek
3162944
Cleaning
Using a soft, damp cloth, wipe the bowl of the cover
clean. Do not use any sort of soaps or detergents as
this can damage the lamp.
If there is any wax stuck to the bowl, carefully
dislodge it.
Turning the lamp on to warm any existing wax may
make it easier to remove.
Replacing the Lightbulb
A 25W incandescent lightbulb comes installed with this product.
If it breaks or burns out, turn o the lamp, unplug the cord, and
let the bulb cool for 15-20 minutes before handling.
Carefully unscrew the lightbulb and replace with a new 25W
incandescent bulb.
NOTE: To properly heat the cover of the lamp you MUST use a 25W
incandescent bulb.

Printed in China
Designed in the U.S.
v1. 11/2021
Warranty Information
90-day Limited Warranty
Territory: United States/Canada
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product as supplied and distributed new by an authorized retailer is warranted by
Southern Telecom, Inc. to the original consumer purchaser against defects in materials
and workmanship (“Warranty”) as follows:
To obtain warranty service:
• Visit our customer support portal: www.customersupport123.com
• Select the brand and model of your device
• Select “Service Request” and ll out the form to begin your inquiry
• Exchanges require dated proof of purchase from an authorized retailer
Your product will be repaired or replaced, at our option, for the same or similar model
of equal value if examination by the service center determines this product is
defective. Products received damaged as a result of shipping will require you to le a
claim with the carrier.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper
installation or operation, lack of reasonable care, unauthorized modication including
software modications such as the installation of custom rmware. This warranty is
voided in the event any unauthorized person opens, alters or repairs this product. All
products being returned to the authorized service center for repair must be suitably
packaged.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY.
DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY
PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY
PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON
DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE
- AT DISTRIBUTOR’S SOLE DISCRETION - ARE THE EXCLUSIVE REMEDIES OF THE
CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR
ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL
DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS,
BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY.
NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR
SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR.
THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL
All product names, trademarks, and registered trademarks are property of their respective owners. All
company, product, and service names used in this document are or identication purposes only. Use of
these names, trademarks, and brands does not imply endorsement.