Maier MHI-6800 User manual

Bio-HEPA
Hybrid Air Purifier
Thank you for using our product.
You have purchased a high-quality
product with one-year free product
warranty. Your satisfaction means
everything to us. We look forward
to serving you at all times. To help
you operate this device, please
read this manual carefully and keep
the warranty card in a proper and
safe place.
OCKP"HGCVWTGU
Automatic air quality control through odor and dust sensors
Gigantic plasma dust collector that is easy to clean
Multiple air intake vents effectively in purification coverage
Large flow rapidly purifies indoor air
Five operation modes for easy control
High-performance HEPA filter services for no less than two years
Effective filtration of particulates as small as 0.1~0.3 micron
Excellent dust collection rate of up to 99.97%
Effectively remove dust, odors and smoke
KPVGNNKIGPV"CPF"OWNVK/HWPEVKQP
MHI-6800
MHI-6800

This machine uses AC 230V/50Hz(Europe) or
AC 100~120V/50~60Hz(USA/Japan). Over
voltage may cause fire hazard or electric shock.
CAUTION
This instruction booklet describes the safety precautions to be observed
during operation to prevent injuries to yourself ,other persons and damage to the device.
The content not only is suitable for this product but also suitable for
electrical appliances in general.
Ensure that all safety precautions are followed when using electrical
appliances for the proper operation of the device.
power
anthorized
personnel
electric shocks and fire hazards.
To prevent fire or electric shock hazard,do not
place the unit in wet places where water may
enter the device.
Do not use fabrics or other materials to cover this
device. Obstructed air inlets and outlets will
result in abnormal operation of this device that
may lead to fire or other accidents.
To prevent interference and distortion, the device
should be placed at least 1 meter away from the
computer, television or radio.
For safety reasons and to prevent fire or electric
shock, unplug the power cord from the electric
outlet socket under the following conditions:
When you do not use the device for a
long period.
When cleaning, servicing the machine or
during replacement of filter materials.
When you move the device.
casing
To prevent electric shock,do not dismantle,
repair or modify this product freely.
Maintenance and cleaning shall be
processed as exactly as what instructed
in this manual.In case of malfunction,please
contact the authorized maintenance center.
ambient

This machine uses AC 230V/50Hz(Europe) or
AC 100~120V/50~60Hz(USA/Japan). Over
voltage may cause fire hazard or electric shock.
CAUTION
This instruction booklet describes the safety precautions to be observed
during operation to prevent injuries to yourself ,other persons and damage to the device.
The content not only is suitable for this product but also suitable for
electrical appliances in general.
Ensure that all safety precautions are followed when using electrical
appliances for the proper operation of the device.
power
anthorized
personnel
electric shocks and fire hazards.
To prevent fire or electric shock hazard,do not
place the unit in wet places where water may
enter the device.
Do not use fabrics or other materials to cover this
device. Obstructed air inlets and outlets will
result in abnormal operation of this device that
may lead to fire or other accidents.
To prevent interference and distortion, the device
should be placed at least 1 meter away from the
computer, television or radio.
For safety reasons and to prevent fire or electric
shock, unplug the power cord from the electric
outlet socket under the following conditions:
When you do not use the device for a
long period.
When cleaning, servicing the machine or
during replacement of filter materials.
When you move the device.
casing
To prevent electric shock,do not dismantle,
repair or modify this product freely.
Maintenance and cleaning shall be
processed as exactly as what instructed
in this manual.In case of malfunction,please
contact the authorized maintenance center.
ambient
2
Fkhhgtgpv"Rctvu
Yjqng"Wpkv"1"Htqpv"Xkgy"
[ ]
[ ]
Yjqng"Wpkv"1"Eqpvtqn"Rcpgn
Odor Sensor
CLEAN METAL GRID
REPLACE FILTER
RESET
CLEAN METAL GRID
REPLACE FILTER
RESET
Air Outlet
Air Inlets
Air Inlets
Dust Sensor
Bottom Stand

[ Back View ]
[ Interior View ]
Back and Interior View
CLEAN METAL GRID
REPLACE FILTER
RESET

[ Back View ]
[ Interior View ]
Back and Interior View
CLEAN METAL GRID
REPLACE FILTER
RESET
of the sensor
But the
CLEANMETAL GRID
REPLACEFILTER
RESET

Control Panel Indicators

Control Panel Indicators
from
Timer
duration
duration
to turn off

During cleaning and maintenance,please turn off and disconnect the plug from the power outlet.
is
Assemble the
Removing
4
Removing Removing
please ensure that the filter is installed
correctly with the

During cleaning and maintenance,please turn off and disconnect the plug from the power outlet.
is
Assemble the
Removing
4
Removing Removing
please ensure that the filter is installed
correctly with the
from
R
R
Remove UV lamp before cleaning
Use a slightly damp cloth to wipe & clean
to avoid scraping or scratching
the coating on the cover.
CLEAN METAL GRID
REPLACE FILTER
RESET

Take out
Put back the sensor correctly after cleaning,
make sure that the cord is reconnected in the
correct direction.

Take out
Put back the sensor correctly after cleaning,
make sure that the cord is reconnected in the
correct direction.
C
making sound
Remove
CLEAN METAL GRID
REPLACE FILTER
RESET

If the dirt is hard to remove, pre-soak in diluted detergent and
then use a toothbrush to clean.
be careful
removed or discarded
this would result in
cause rusting
ensure that the unit is completely dry
if you want to purchase

If the dirt is hard to remove, pre-soak in diluted detergent and
then use a toothbrush to clean.
be careful
removed or discarded
this would result in
cause rusting
ensure that the unit is completely dry
if you want to purchase
Remove
the the not functioning,
Carefully replace with
Resetting
The with the power
pointed depress inside the unit.
please reset
1.CLEAN METAL GRID Indicator
2.REPLACE FILTER Indicator
CLEAN METAL GRID indicator
REPLACE FILTER Indicator
being during this resetting operation.
Replacing the UV lamp
CLEAN METAL GRID
REPLACE FILTER
RESET
CLEAN METAL GRID
REPLACE FILTER
RESET
CLEAN METAL GRID
REPLACE FILTER
RESET
RESET
RESET

Sensor
Why on sensor
sensor
sensor
the source of pollution was created indoor (e.g.smoking).
Use a
This will
is not working

Sensor
Why on sensor
sensor
sensor
the source of pollution was created indoor (e.g.smoking).
Use a
This will
is not working
Please check
is
is
Why is the filter not getting rid of dust and odor effectively ?
Check and make sure that the power cord is securely connected to the power outlet.
Please ensure that the uint has been properly reassembled after cleaning and maintenance.
The unit will not operate if the plasma dust collector or the front cover is not properly
installed.
have

(1) This product passes strict tests prior to leaving the factory. Customers could,within one year
from the date of purchasing, enjoy free repair or replacement of parts if it is checked by our
company that malfunction or damage to the device and/or parts occurred under normal running
condition.
(2) The guarantee does not cover the damages that are attributed to self dismantling and
assembling, unauthorized operation not found in the instructions,random change of
power source and/or voltage, artificial causes and natural disasters.
(3) Date (s) on this guarantee and the purchase invoice will be used to determine the validity of
one year free maintenance.
One year from the
date of purchase
DISTRIBUTED BY:
Bio-HEPA
Hybrid Air Purifier
UCNGU"
URGEKHKECVKQPU"
70m2-90m2
Product
Name &
Add.of
the store
the unit to a
Rated voltage EuropeAC230V
/ 50Hz

Power consumption˖80W
Ion output˖2x10 /cm
Acative oxygen output˖0.05ppm
UV spectrum˖ 20 w/cm (at 10cm distance)
6 3
2

90