MAJOR LUTIE FITNESS PS1A User manual

The power cage includes three packages , please confirm before installation
Website: major-lutie.com
After-sales service: [email protected]
Website:
major-lutie.com Email:
[email protected]
PS1A

For the best service, please have the following information ready
when requesting for service:
Buyer Full Name
Order Number
Part Number
Part Picture
Model Number
Phone Number
If you have any questions, receive a damaged part or need
additional service support, please contact our customer service
department via the following methods:
Please Email:
[email protected]
Response Time: 1-2 Business Days
Emailing us with the information above will be the best
method to receive a response.
Toll-Free:
800-276-8577
(9:00 AM - 4:00 PM EST, Monday - Friday)
Visit Website:
major-lutie.com
SERVICE
Before using this equipment, it is strongly recommended that you
consult your physician whether this fitness equipment is applicable
to you. Please do not use this machine if you have the following
conditions or diseases:
Heart Disorders
Recent Stroke or Transient Ischemic Attack
Extreme Obesity
Pregnancy
Bone Weaknesses
Spinal Injury
High Blood Pressure or Hypertension
Hiatus Hernia or Ventral Hernia
In a State of Intoxication or Fatigue
Other diseases that are NOT recommended by doctors for
exercise
This equipment is designed and intended for home and consumer
use only, not for commercial use.
GUIDEILNES

This workout equipment is designed and built for optimum safety.
However, certain precautions apply whenever you operate this
exercise equipment. Be sure to read the entire manual before
assembling and operating this equipment. Also, note the following
safety instructions:
1. Two people are recommended for the installation of this product instead
of one.
2. If you feel dizzy, or other abnormal sensations at any time while operating
this device, please stop using the product or exercise and contact your
physician as soon as possible.
3. Make sure your equipment is correctly assembled before you use it. Be
sure all the screws, nuts, and bolts are tightened prior to use.
4. If this equipment or parts are damaged, do not use it again to exercise.
5. Please do not eat within one hour before using the machine.
6. This product should be placed on a flat surface when using. A mat or
other covering material on the ground is recommended.
7. Keep children and pets away from this equipment at all times.
8. It is recommended to wear tight training clothes, tie your hair up,
preferably in a pill, and remove your jewelry when using this product to
avoid unexpected hazards.
9. It is recommended that novice or teenagers should be accompanied by a
trainer or parents to use our products, and children under 12 years old are
not recommended to use this fitness equipment.
10. The users of this product should keep their weight within 220lb/100k
Please read all instructions carefully before assembling or
operating this product.
g.
Electric screwdriver
1. Tools for assembly:
General tools you may need for the assembling this strength
equipment:
s
Hexagon wrench sets
Wrench sets and adjustable wrenches
Rubber Hammer
Lubricant
2. Insert bolts into the frame as illustrated in the drawing of each
of the steps.
3. Hand-tighten the bolts and nuts during assembly. Tighten all
the hardware once the entire unit has been completely assembled.
4. With the proper assistance, the right tools, and strictly following
the assembly steps, and given enough time.
5. Thoroughly read each step before proceeding to assemble the
parts of that step.
6.To help make it easier for you to assemble the device, we have
noted the required hardware in the every steps.
7. When the equipment is fully assembled check all the functions
for correct operation. Consult the manual if you experience any
issues, or for further help please contact our service department.
PREPARATION
8.Please regularly check if the screws are loose, and if they are,
tighten them quickly.

PARTS LIST
A.Underframe
1pcs
HARDWARE LIST
80 70 20
2.Hexagon bolt
(M10x80L)
3.Hexagon bolt
(M10x70L)
4.Hexagon bolt
(M10x20L)
5.Flat gasket
φ10
6.Lock nut M10
ACCESSORIES LIST
7.Shock pad 8.Buckle 9.Handle
4pcs
12.Lat pull-down bar 13.Cable bar 14.V bar
4pcs 10pcs 6pcs 98pcs 46pcs
C.Rear pillar tube
D.Top beam tube E.Bottom connecting pipe F.Upper connecting pipe
G.Pull-up tube H1.Left transverse branch H2.Right transverse
branch
I1.Left hookI2.Right hook J1.Left handlebar tube J2.Right handlebar tube
K.Pedal L.Weight frame M.reinforce
2pcs
B.Front pillar tube
2pcs 2pcs
2pcs 1pcs 1pcs
1pcs 1pcs 1pcs
1pcs 1pcs1pcs1pcs
2pcs 2pcs
N.Perforated large round
iron sheet group
2pcs
2pcs
O.Carriage P.72 Casing
set
Q.Weight-bearing guide rod R.Acrylic plate
S.Cable T.Down junction plate U.Load
bearing tube 2 V.Connect U
W.Upper
unction plate
Y.Gun barrel frame
2pcs 4pcs 1pcs
2pcs 4pcs 4pcs 2pcs
2pcs
X.Load
bearing tube 1
4pcs 1pcs
90
1.Hexagon bolt
(M10x90L)
32pcs
10.50 butterfly clip 11.Part
group 2
2pcs 2pcs 4pcs 4pcs
1pcs 1pcs 1pcs
15.Sheep eye open screw
hook
4pcs
2pcs
Z.Nylon slip
16.Ring bolt
4pcs

Do not tighten all bolts until all installations are complete. Do not tighten all bolts until all installations are complete.
STEP 1.
90
1.Hexagon bolt
(M10x90L)
5.Flat gasketφ10 6.Lock nut M10
4pcs 12pcs 4pcs
NOTE:Except for pre-installing the hardware you need
K.Pedal
Y.Gun barrel frame
STEP 2.
NOTE:Except for pre-installing the hardware you need
70
3.Hexagon bolt
(M10x70L)
8pcs
5.Flat gasketφ10
24pcs
6.Lock nut M10
12pcs
1.Hexagon bolt
(M10x90L)
90
4pcs
20
4.Hexagon bolt
(M10x20L)
4pcs
15
56
1
5
5
6
5
4
4
5
K
Y
5
4
4
5
A
E
35
6
5
6
5
33
5
5
66
5
5
C
3
5
3
5
5
6
1 5
1 5
6
5
5
6
33
5
6 5 5 1
M

Do not tighten all bolts until all installations are complete. Do not tighten all bolts until all installations are complete.
STEP 3.
90
1.Hexagon bolt
(M10x90L)
5.Flat gasketφ10 6.Locek nut M10
8pcs 16pcs 8pcs
NOTE:Except for pre-installing the hardware you need
STEP 4.
90
1.Hexagon bolt
(M10x90L)
5.Flat gasketφ10 6.Lock nut M10
8pcs 14pcs 6pcs
NOTE:Except for pre-installing the hardware you need
6 5
5 1
B
B
O
O
P
P
D
65
51
D
G
W
T
T

Do not tighten all bolts until all installations are complete.Do not tighten all bolts until all installations are complete. Do not tighten all bolts until all installations are complete.
STEP 5.
90
1.Hexagon bolt
(M10x90L)
5.Flat gasketφ10 6.Lock nut M10
4pcs 8pcs 4pcs
NOTE:Except for pre-installing the hardware you need
STEP 6.
90
1.Hexagon bolt
(M10x90L)
5.Flat gasketφ10 6.Lock nut M10
4pcs 8pcs 4pcs
NOTE:Except for pre-installing the hardware you need
F
15
5 1
6 5
6 5
5 1 1 5
1 5
5 6
5 6
N
N
N
V
V

Do not tighten all bolts until all installations are complete. Do not tighten all bolts until all installations are complete.
STEP 7.
80
2.Hexagon bolt
(M10x80L)
5.Flat gasketφ10 6.Lock nut M10
4pcs 8pcs 4pcs
NOTE:Except for pre-installing the hardware you need
STEP 8.
NOTE:Except for pre-installing the hardware you need
Q
Q
L
7
7
XX
X
X
25
5 6
U
U
U
U
16
11
11
16
11
11
Screws and flat
washers are pre
installed

Z
15
56
Do not tighten all bolts until all installations are complete. Do not tighten all bolts until all installations are complete.
STEP 9.
NOTE:Except for pre-installing the hardware you need
STEP 10.
4.Hexagon bolt
(M10x20L)
5.Flat gasketφ10
2pcs 4pcs
NOTE:Except for pre-installing the hardware you need
20
I1
H1
J1 I2
H2
J2
6 5 5 4
6.Lock nut M10
2pcs
S
9
8
S

Do not tighten all bolts until all installations are complete.
STEP 11.
NOTE:Except for pre-installing the hardware you need
5.Flat gasketφ10 6.Lock nut M10
4pcs 2pcs
3.Hexagon bolt
(M10x70L)
2pcs
35
6
5
R
R
Please regularly check whether the gcrews are tight
70