Major tech MT662 User manual

INSTRUCTION MANUAL
DESKTOP
THERMO-HYGROMETER
MT662

1. Product performance
• Environment comfort display: COMFORT (comfortable), WET (high
humidity), DRY
• Temperature measuring range: 0°C~50°C (32°F~120°F)
• Temperature measurement accuracy: ± 1.0°C (1.8°F)
• Temperature display resolution: 0.1°C (0.1°F)
• Humidity measuring range: 10% RH-90% RH
• Humidity measuring accuracy: ±5% (40% RH-80% RH) other ±8%
• Battery: AAA 1.5V
• Time/temperature/humidity display
• °C/°F temperature units the way self-locking switch show
• Highest/lowest temperature and humidity memory function
• Calendar shows that the whole point timekeeping, daily alarm functions,
12/24 hour clock
2. Feature set
2.1. The basic function keys
• [MODE] clock/alarm function mode switching
• [ADJ] settings adjust the value of projects/On, Off alarm clock/display
date
• [MEMO] showed that the maximum memory, the most low-temperature,
humidity values, and clear the memory of temperature and humidity
values
• [°C/°F] self-locking switch means temperature display unit
• [RESET] to clear all settings and memory data back system the initial
status
2.2. Clock and date settings
• Press [MODE] key to set the replacement of items: Minutes CLOCK
12/24Time Month Date Exit-set. Press [ADJ] key to add one item,
hold down the [ADJ] 2 seconds after 8Hz Express since increasing minute
second set automatically cleared, set the month, when the day's largest
auto-adjust the number of days, 1 minute without keys automatically exit.
• Detail: According to [MODE] 2 second to enter the clock setting mode,
minutes begin blinking, press [ADJ] regulation minutes.
Then [MODE] click, clock start blinking, press [ADJ]
regulator clock.
• Then [MODE] click conversion 12/24 hours, according to
[ADJ] regulation. Then [MODE] about the month start
flashing, press [ADJ] regulation.
2

3
• Then [MODE] about the date of start blinking, press
[ADJ] regulation. Then click the [MODE] to confirm
and exit mode.
2.3. Alarm clock settings
• Press [ADJ] key to set the replacement items:
Alarm Clock The whole point timekeeping Alarm
clock, the whole point of time at the same time open
Alarm clock, the whole point timekeeping clearance
simultaneously.
• Detailed Description: according to [MODE] click to
display the alarm time, and then press and hold [MODE]
2 seconds, minutes start flashing in accordance with
[ADJ] regulation minutes, and then [MODE] you start blinking clock
according to [ADJ] regulator clock, row by [MODE] twice to confirm.
• Open and turn off the alarm:
Click the [MODE] key to display the alarm time, click the [ADJ] button of
" " symbol, then [ADJ] button click the " " symbol, Then [ADJ] button
click the " " symbols, two functions simultaneously express the
opening of a row by the [ADJ] key to enable or turn off this feature, press
[MODE] button to confirm exit.
2.4. Date of Show
• At the current status of the clock click [ADJ] automatically display the
date, not three seconds after the exit button.
2.5. Maximum/minimum temperature and humidity values
• According to [MEMO] showed that temperature and humidity memory
Maximum (MAX)/minimum (MIN), Length by more than 2 seconds to
clear memory of temperature and humidity values.
2.6. Environment comfort display
• Temperature at 20°C~26°C (68°F~8.8°F), relative humidity at 50% RH-
70% RH show between "•COMFORT" comfort symbols.
• At any temperature, relative humidity above 70% RH show "•WET" sign
high humidity.
• At any temperature, relative humidity below 50% RH show "• DRY"
symbols do bath.
Note:
• Applicable environment: home, office and places of non-corrosive gas.
• Use the ambient temperature range: 0°C~50°C (32°F~120°F).

www.major-tech.com www.majortech.com.au
[email protected] [email protected]
MAJOR TECH (PTY) LTD
South Africa Australia