MAJORITY Comberton COM-DAB-BLK User manual

COM-DAB-BLK
Majority Comberton
DAB / DAB+ / FM Radio
User Guide

Controls And Funcons���������������������������������������������� 1
What’s In The Box?����������������������������������������������������3
Instrucons Guide ���������������������������������������������������� 4
Basic Operaon �������������������������������������������������������� 4
DAB / DAB+ Radio����������������������������������������������������� 5
How to store and recall a preset DAB staon ����������� 6
FM Radio������������������������������������������������������������������� 7
Staon informaon for DAB/DAB+ and FM Radio �� 10
Clock and Date Sengs ������������������������������������������� 12
Dual Alarm Seng��������������������������������������������������� 14
Alarm Sounds and Snooze ��������������������������������������� 15
Other Funcons������������������������������������������������������� 16
Technical Specicaons ������������������������������������������� 18
Warranty ����������������������������������������������������������������� 18
Troubleshoong Guide �������������������������������������������� 19
Safety Informaon���������������������������������������������������20
Watch video tutorials and register
your product for a FREE 3-year warranty
at www.majorityradios.co.uk
3
Y
E
A
R
F
R
E
E
E
X
T
E
N
D
E
D
W
A
R
R
A
N
T
Y
Contents

1
Controls And Funcons
Front View
1. Volume -/+
2. Standby
3. Mode
4. Scan
5. Info/Menu
6. Preset
7. Alarm
8. Snooze
9. Tune +/-/Enter

2
Rear View
10. ON/OF
11. USB Power Supply Port
12. Earphone Jack
13. Antenna
14. Battery Compartment
15. Display Screen
Controls And Funcons

3
What’s In The Box?
1. Majority Comberton DAB / DAB+ / FM / Radio Clock
2. UK Standard Plug DC 5V, 2A Power Supply
3. User Guide

4
Please note all (Ref.) refer to Page 1 Controls and Functions mapping guide.
Basic Operation
Instrucons Guide Instrucons Guide
Plug the connector into the back of the system labelled USB
(Ref.) and the power supply into the mains.
Ensure the antenna (Ref.) is extended as far as possible so that
you can rotate it. This will enable you to get the best signal you
can. Switch the button on the rear of the unit to “On” (Ref.).
Press the ‘Standby’ button to turn the unit on (Ref.). It will
automatically take you to DAB radio mode or the previous mode
you were using. When DAB Radio is activated for the rst time,
it will automatically start scanning and storing all stations that
have a good signal. If scanning does not automatically start
press the ‘Scan’ Button (Ref.). To scroll through the stations, use
the ‘Tune +/- /Enter’ button (Ref.). Press ‘Tune +/-/Enter’ (Ref.)
to listen to a station.
To change the mode, press the ‘Mode’ button (Ref.). This will
switch between DAB Radio and FM Radio.
The display screen will dim automatically after 10 seconds if left
in standby or working mode.
Standby
To place the music system in standby, press the ‘Standby’
button (Ref.). To turn o fully, switch it o at the back of the
unit (Ref.) and at the mains. The cord must be out of reach of
children.

5
DAB / DAB+ Radio
Instrucons Guide
Press the ‘Mode’button (Ref.) to switch to DAB Radio. On rst
use it will automatically scan all stations and save them.
Fully extend the antenna (Ref.).
To auto scan, press the ‘Scan’ button (Ref.) and then release.
This will start scanning up the frequency band and store all
stations that have good signal.
The radio will automatically save all the stations with a strong
signal, up to 240 MHz. After searching has nished it will
automatically play the rst station stored.
To listen to all stations that have been stored twist the ‘Tune +/-/
Enter’ dial (Ref.) to scroll through them. Depress the ‘Tune +/-/
Enter’ dial (Ref.) when on the required station.
The radio will display station information when you press the
‘Info/Menu’ button (Ref.). Press multiple times to view all
information available (See page 10).
When you turn the radio on after it switching o, it will
automatically tune to the same station (DAB or FM) that was last
selected.
In DAB mode, the radio will synchronize with the time and date
of the station.

6
Instrucons Guide
Up to 10 stations can be set.
To store a station that you are currently playing:
Press and hold ‘Preset’ button (Ref.). “<1: (Empty)” will show on
the display.
Twist the ‘Tune +/-/Enter’ dial (Ref.) to change the“<1” to the
number you want to store the station as. Then press ‘Tune +/-/
Enter’ dial (Ref.) to save. The display will then show “Preset [1]
stored”.
How to play a preset radio station
Press the ‘Preset’ button (Ref.).
Twist the ‘Tune +/-/Enter’ (Ref.) to scroll through your preset
stations. You can store up to 10.
Press ‘Tune +/-/Enter’ dial (Ref.) to select your choice.
How to store and recall a preset DAB station
IMPORTANT: Please make sure you have
extended the antenna to its full length
(Ref.13). This will then enable you to rotate
it to get the best signal.
!

7
FM Radio
Press the ‘Mode’button (Ref.) multiple times to switch between
DAB and FM. The rst time you do this, the FM frequency “87.
MHz” will be displayed on the screen.
Fully extend the antenna (Ref.).
To auto scan, press and release the ‘Scan’ button (Ref.). This will
then start scanning up the frequency band and play the rst
station it nds with good signal.
To scan down the frequency band, press and hold the ‘Scan’
button (Ref.) for a few seconds.
The radio will display station information when you press the
‘Info/Menu’ button (Ref.). Press multiple times to view all
information available (See page 11).
Instrucons Guide

8
FM Scan Setting
Choose between scanning strong and weak signals (All) or only
the strong stations (Only).
Press and hold the ‘Info/Menu’button (Ref.).To make your
choice, twist the ‘Tune +/-/Enter’ dial (Ref.) to highlight your
option.
Select “FM Scan Setting” and press‘Tune +/-/Enter’ dial (Ref.)
down. Twist the ‘Tune +/-/Enter’ dial (Ref.) to choose between
“All” or “Only”. Press the ‘Tune +/-/Enter’ dial (Ref.) down to
conrm your choice.
To tune a specic frequency manually
To listen to a specic frequency, twist the ‘Tune +/-/Enter’ dial
(Ref.) to search forward and back.
Mono and Stereo
In working mode, press the ‘Tune +/-/Enter’ dial (Ref.), to switch
between ‘Set to Mono’ or ‘Set to Stereo’.
Instrucons Guide
IMPORTANT: Please make sure you have
extended the antenna to its full length
(Ref.13). This will then enable you to rotate
it to get the best signal.
!

9
How to store a preset radio station
Up to 10 stations can be set.
To store a station that you are currently playing:
Press and hold ‘Preset’ button (Ref.). “<1: (Empty)” will show on
the display.
Twist the ‘Tune +/-/Enter’ dial (Ref.) to change the“<1” to the
number you want to store the station as. Then press ‘Tune +/-/
Enter’ dial (Ref.) to save. The display will then show “Preset [1]
stored”.
How to play a preset radio station
Press the ‘Preset’ button (Ref.).
Twist the ‘Tune +/-/Enter’ (Ref.) to scroll through your preset
stations. You can store up to 10.
Press ‘Tune +/-/Enter’ dial (Ref.) to select your choice.
Instrucons Guide

10
Instrucons Guide
Station information for DAB/DAB+ and FM Radio
DAB/DAB+ Radio
Press the ‘Info/Menu’button (Ref.) repeatedly to show the
dierent programme information.
Signal Strength: Displays a signal bar with the strength of the
current station.
Bit Error Rate: Provides details of the signal error rate.
Channel and Frequency: Displays the station’s transmission
channel number and frequency.
PTY (Programme Type): Shows the type and description of the
program provided by the DAB station.
Time and Date: Displays the time and date information
provided by the broadcaster.
Bit Rate: The data rate which the signal is being transmitted.
Dynamic Label Segment (DLS): Displays scrolling text
information supplied by the broadcaster.

11
Station information for FM Radio
Instrucons Guide
FM Radio
Press the ‘Menu/Info’ button (Ref.) repeatedly to show the
dierent programme information.
Programme Type: Displays a description of the type of
programme provided by the broadcaster.
Signal Strength: Displays a signal bar with the strength of the
current station.
Time and Date: Displays the time and the date.
Frequency: Displays the station’s transmission frequency.
Audio Type: Displays the audio type of the station you are
listening to. It will either be stereo or mono.
Radio Text: Displays scrolling text information supplied by the
broadcaster.

12
Clock and Date Settings
Instrucons Guide
Manually Setting the time
The time will automatically update after the rst use of DAB
Radio. However, you can still set the time manually.
Ensure the unit is turned on.
To make your selection, twist the ‘Tune +/-/Enter’ dial (Ref.) to
choose your option.
Select “Time/Date” and press the‘Tune +/-/Enter’ dial (Ref.).
The hour will ash on the display screen. Twist the ‘Tune +/-/
Enter’ (Ref.) dial until the required hour is displayed.
To conrm the hour, press ‘Tune +/-/Enter’ dial (Ref.) down.
The minutes will ash on the display screen. Twist the ‘Tune +/-/
Enter’ dial (Ref.) until the required minutes are displayed.
To conrm the minute, press‘Tune +/-/Enter’ dial (Ref.). The
time is now set.

13
Manually Setting the Date
The date can be changed after changing the time.
The year will ash on the display screen. Twist the ‘Tune +/-/
Enter’ dial (Ref.) until the required year is displayed.
To conrm the year, press the ‘Tune +/-/Enter’ dial (Ref.).
The month will ash on the display screen. Twist the ‘Tune +/-/
Enter’ dial (Ref.) until the required month is displayed.
To conrm the month, press ‘Tune +/-/Enter’ dial (Ref.).
The day will then ash on the display screen. Twist the ‘Tune +/-/
Enter’ dial (Ref.) until the required date is displayed.
To conrm the date, press ‘Tune +/-/Enter’ dial (Ref.).
Instrucons Guide

14
Dual Alarm Setting
Instrucons Guide
Press the ‘Alarm’ button (Ref.) once for Alarm 1 or twice for
Alarm 2. Press the ‘Tune +/-/Enter’ dial (Ref.) to conrm.
To turn the alarm on or o, twist the ‘Tune +/-/Enter’ dial (Ref.)
so that “ON”is ashing and press the ‘Tune +/-/Enter’ dial (Ref.)
to conrm.
The hour digits for the alarm will ash. Twist the ‘Tune +/-/Enter’
dial (Ref.) to change the hour and press ‘Tune +/-/Enter’ dial
(Ref.) to conrm.
Twist the ‘Tune +/-/Enter’ dial (Ref.) to change the minutes and
press ‘Tune +/-/Enter’ dial (Ref.) to conrm.
Twist the ‘Tune +/-/Enter’ dial (Ref.) to change the volume and
press ‘Tune +/-/Enter’ dial (Ref.) to conrm.
Twist the ‘Tune +/-/Enter’ dial (Ref.) to change between which
sound you would like: Alarm, DAB or FM Radio and press the
‘Tune +/-/Enter’ dial (Ref.) to conrm.
To set Alarm 2, follow Alarm 1 instructions but press the ‘Alarm’
button (Ref.) twice.
NOTE: You can press the‘Info/Menu’(Ref.) button to go back to
the previous step when programming the alarm.

15
Instrucons Guide
Alarm Sounds and Snooze
Snooze/Switch o Alarm when sounding
When the alarm sounds, press the ‘Snooze’ button (Ref.) to
snooze for 9 minutes. The radio will go into standby mode.
To turn the alarm o completely when sounding, press the
‘Standby’ button (Ref. 2).
To turn o Alarm 1 or Alarm 2
Press the ‘Alarm’ button (Ref.) once for Alarm 1 or twice for
Alarm 2. Press the ‘Tune +/-/Enter’ dial (Ref.) to conrm.
To turn the Alarm on or o, twist ‘Tune +/-/Enter’ dial (Ref.) so
that “OFF” is ashing and press the ‘Tune +/-/Enter’ dial (Ref.) to
conrm.
IMPORTANT: Please make sure you have
extended the antenna to its full length
(Ref.13). This will then enable you to rotate
it to get the best signal.
!

16
Other Functions
Instrucons Guide
Sleep setting
This enables you to programme the radio to switch o at a
specic time, up to 120 minutes from activation.
Press and hold the ‘Alarm’ button (Ref.).
Choose from //////5 mins or OFF using ‘Tune +/-/
Enter’ dial (Ref.).
When your choice is displayed, press the ‘Tune +/-/Enter’ dial
(Ref.) button. The system will automatically start the timer.
To turn the sleep timer o, follow the above instructions and
choose “OFF” from the choices.
Once the timer has been set, the minutes will countdown on
the display screen. For example, if set to turn o in 5 minutes,
“S5” will ash, counting down to “S0” when the radio will go into
standby mode.

17
System Reset
Press and hold the ‘Info/Menu’button (Ref.).
Twist the ‘Tune +/-/Enter’ dial (Ref.) to highlight “Factory reset”
and press the ‘Tune +/-/Enter’ dial (Ref.). The display screen will
show “Factory reset”.
Use the ‘Tune +/-/Enter’ dial (Ref.) dial to choose “Yes” or “No”.
Press the ‘Tune +/-/Enter’ dial (Ref.) to conrm.
System Version – System Version Display
Press and hold the ‘Info/Menu’button (Ref.).
Use the ‘Tune +/-/Enter’ dial (Ref.) to select “System Version”.
Press the ‘Tune +/-/Enter’ dial (Ref.) to conrm.
Other Functions
Instrucons Guide

18
Warranty
Technical Specications
All products come with a standard 12 month warranty. All items
must be registered on www.majorityradios.co.uk for the
warranty to be valid. Once on the web page, use the menu to
nd “ register your product”. You will also be given the chance
to extend your warranty for an additional 24 months, free of
charge.
Power Supply and Batteries
The unit is powered and charged by UK Standard Plug DC 5v.
The unit is also portable when powered by 4 x C Batteries (Not
Supplied). These can be inserted into the battery compartment
on the back of the unit (Ref.).
Power Supply In-built Battery
Mode: FM(87.5 MHz – 108MHz)
DAB / DAB+ -MHz
Output Connector: Earphone jack
Aerial: Integral telescopic aerial
Instrucons Guide