Makeblock Laserbox Pro User manual

© 2021 Autobotic Sdn. Bhd. All Rights Reserved
MakeBlock Laserbox Pro
Simple Installation Guide

© 2021 Autobotic Sdn. Bhd. All Rights Reserved P a g e 1| 4
01 Check & Confirm List of Items
02 Understand Your Laserbox
Hardcopy of the User Manual will be included in the
package, you can get the softcopy by scanning the QR
code or CLICK HERE.
*Please refer to the User Manual from Page 6 to 8*
User Manual

© 2021 Autobotic Sdn. Bhd. All Rights Reserved P a g e 2| 4
03 Refill Water Tank
Please refill the water tank before the 1st time of operation
*The water was removed due to transportation safety*
Please CLICK HERE or scan the QR Code for more
information about water tank refilling process.
Tips
•Anti-freeze/coolant liquid is not necessary
•1st time does not require heat gun/ hot air gun
•Recommended Liquid Type: Tap Water/ Distilled
Water
Refilling Water
Water Storage Tank
is located below the
left panel

© 2021 Autobotic Sdn. Bhd. All Rights Reserved P a g e 3| 4
04 Quick Operation Guide
Step 1: Connect the Smart Smoke Purifier.
Step 2: Start the Laserbox.
Step 3: Download and install the required software.
Step 4: Connect computer to the Laserbox.
*Please refer to the User Manual provided from Page 10 to 22*
05 Congratulations! You have completed your setup
To produce good quality product, please perform
scheduled maintenance. You can find more information
about maintenance and support in the official website
by scanning the QR code.
Maintenance
Contact Us MakeBlock Laserbox