Step 1:
Insert frames into central housing.
Step 2:
Secure with bolts provided.
Imported by: Home Medical Products Australia Pty Ltd
For: Making Life Easy 250 Camberwell Road Camberwell 3124
Phone: 1300 653 279 Web: www.makinglifeeasy.com.au
Assembly Instructions
Step 3:
Attach non-slip slip feet to ends.
Step 4:
Screw tension bolt to central
barrel. The bolt can be adjusted
to required resistance level.
Warranty conditions
• This good has a 12 month warranty from date of purchase.
• Valid proof of purchase is required for all warranty claims.
• Warranty covers manufacturing faults.
• Warranty does not cover change of mind or damage, fault or failure due to external causes,
including accident, abuse, misuse, or normal wear and tear.
• Any unauthorised repairs, alterations or modifications or any attempt to open or dismantle the
good will render the warranty void.
• Defective goods together with valid proof of purchase should be returned to the place of purchase
or your nearest pharmacy that stocks the same goods, or shipped directly to the manufacturer. To
locate your nearest pharmacy that stocks the same goods visit www.makinglifeeasy.com.au.
If shipped directly to the manufacturer, you must prepay the shipping and transportation
charges, and insure the shipment or accept the risk of loss or damage during shipment and
transportation. The manufacturer will determine at no cost to you the cause of the fault (if any)
within a reasonable time frame. Any repaired or replaced goods, original goods determined not
faulty, or refund (if a major failure is determined) will be sent to the pharmacy you returned the
goods to for collection, or shipped to you freight prepaid if you shipped the goods directly to the
manufacturer.
• Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for any
other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if goods fail to be of acceptable quality and the failure does not amount to a major
failure. Goods presented for repair may be replaced by refurbished goods of the same type rather
than being repaired.
Dimensions
Cleaning & Maintenance
• This product may be cleaned with a soft cloth. Cleaning with products or solvents is not
recommended as it may damage the product.
• Regularly check the pedal exerciser and ensure all bolts are secure.
• This pedal exerciser is designed for limited or domestic usage and is not designed for high or
commercial usage.
• Parts of this pedal exerciser, including the pedal shaft near the central housing, may become warm or
hot during use.
• Do not stand on or put excessive weight on the pedals as this may damage the Pedal Exerciser.
Safety Advice
Parts
Central Housing (x1)
Feet Frames (x2)
Tension Bolt (x1)
Nuts and bolts (x2 sets)
Feet (x4)
Spanner (x1)
Unit weight
2.3 kg
Length
550 mm
Width
410 mm
Height
310 mm
