Making Life Easy Everyday Aids Pedal Exerciser With Counter User manual

Features:
• Digital counter displays time, reps per minute and calories.
• Easy to assemble, compact and totally portable.
• Can be used on the floor to exercise legs or placed on a table as an arm exerciser.
• Easy adjustable tension bolt.
• Adjustable pedal straps to hold feet securely.
• Ideal for those with limited movement.
Please ensure this manual is read and understood
before using the product.
Provides gentle exercise for improved
strength and circulation
Pedal Exerciser
With Counter
Everyday
Aids

Step 1:
After removing all the plastic wrapping insert the
tension adjustment bolt into the top of the central
housing and lightly tighten.
Step 2:
Unfold each of the lower leg sections and ensure
the spring release buttons are clicked into place.
Imported by: Home Medical Products Australia Pty Ltd
For: Making Life Easy 250 Camberwell Road Camberwell 3124
Phone: [phone] Web: www.makinglifeeasy.com.au
Assembly Instructions
Folding the Pedal Exerciser
To fold the pedal exerciser press the spring release
buttons located on the lower leg sections and fold
the legs inwards and under the central housing.
Adjusting the pedal straps
The pedal straps have 2 sets of holes to allow you
to adjust the length of the strap around your foot
or shoe.
Warranty Conditions
• This good has a 12 month warranty from date of purchase.
• Valid proof of purchase is required for all warranty claims.
• Warranty covers manufacturing faults.
• Warranty does not cover change of mind or damage, fault or failure due to external
causes, including accident, abuse, misuse, or normal wear and tear.
• Any unauthorised repairs, alterations or modifications or any attempt to open or dismantle
the good will render the warranty void.
• Defective goods together with valid proof of purchase should be returned to the place of purchase
or your nearest pharmacy that stocks the same goods, or shipped directly to the manufacturer.
To locate your nearest pharmacy that stocks the same goods visit www.makinglifeeasy.com.au If
shipped directly to the manufacturer, you must prepay the shippingand transportation charges,
and insure the shipment or accept the risk of loss or damage during shipment and transportation.
The manufacturer will determine at no cost to you the cause of the fault (if any) within a
reasonable time frame. Any repaired or replaced goods, original goods determined not faulty,
or refund (if a major failure is determined) will be sent to the pharmacy you returned the goods
to for collection, or shipped to you freight prepaid if you shipped the goods directly to
the manufacturer.
• Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for any
other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if goods fail to be of acceptable quality and the failure does not amount to a major
failure. Goods presented for repair may be replaced by refurbished goods of the same type rather
than being repaired.
How To Operate The Counter
CNT
Time
CAL
RPM
SCAN
MODE/RESET
0
0:00
2
1
Unit weight
2 kg
Length
460 mm
Width
385 mm
Height
250 mm
• This pedal exerciser is designed for limited or domestic usage and is not designed for high or
commercial usage.
• Take care when folding the pedal exerciser and keep fingers, feet and legs clear of the folding
mechanism or frame.
• Parts of this pedal exerciser, including the pedal shaft near the central housing, may become warm or
hot during use.
• Do not stand on or put excessive weight on the pedals as this may damage the pedal exerciser.
Safety Advice
Dimensions
Cleaning & Maintenance
• This product may be cleaned with a soft cloth. Cleaning with products or solvents is not
recommended as it may damage the product.
• Regularly check the pedal exerciser and ensure spring buttons are fully engaged.
Press the Mode/Reset button on the
multi-function counter to turn it on.
Press it again to select the TIME, CAL and
RPM displays.
The SCAN option will cycle through the TIME,
CAL and RPM displays with each one being
displayed on the screen for a few seconds.
Note: The counter will stop counting if you stop
turning the pedals. After a few minutes without any
movement the counter will turn itself off.
2
1