Makita 5201NA Manual

TECHNICAL INFORMATION
For Models
MAKITA 260mm(10-1/4") Circular Saw
Description
5201N-A
Specifications
Standard equipment
Optional accesories
Saw blade of double-purpose for lateral and horizontal directions (attached to the machine)
Parallel ruler 1pc, Spanner13 1pc, Spanner22 1pc
Features and benefits
1. Functional design, light weight, easy to handle, improved efficiency
2. Scattering of ground particles has been decreased and operativity has been improved by placing the
chips exhaust outlet in rear side.
3. Since a saw blade will stop within two seconds or so after switching off in electric brake equipped
model, you can work safely.
Cross cut saw blade260
Combination blade260
Cut-off wheel 255(No.12,No.14)
Circular saw stand
New Tool
CONCEPTION AND MAIN APPLICATIONS
This is a model made by improving 5201, of which design
has been changed totally. The exhausting outlet of chips is
put in rear side and the gripping angle of Handle is
changed for easier operation. Also, the power is improved,
the weight is decreased, and an electric *break equipped
type has been developed concurrently for promoting
Motor Series commutator motor
Single phase 100V
15A
50/60Hz
1430W
3700R/min.
260mm(hole diameter 25mm)
97mm
64mm
445mm
8.3kg
5m
Voltage
Current
Cycle
Continuous Rating Input(W)
at 45 degrees
at 90 degrees
no load speed r.p.m.
Max. Cutting
Capacities
Saw blade diameter
Overall length
Net Weight
Power supply Cord
*Electric brake function only for 5201N-A

Capacity
The motor performance has been improved by 50% comparing to5201.
Notes in assembly/disassembly
Same as Model 5201.
Other notes
1. In #5201N-A, do not use Wave washer20 for the side ( outside) of Ball bearing in the Armature rear side.
2. Be sure to use Carbon brush "CB-152" for #5201N, and "CB-154" for #5201N-A , because the motor rectifiability and
stopping time are effected by it. Be careful.