Makita LS1030 Manual

Change on slide plate and base
44192
TECHNICAL INFORMATION
Subject
For Models
Description
1. The slide plates will be changed from 0.3 mm (0.0012" )
to 0.5 mm (0.002" ) in thickness and 3.8 mm (5/32" ) to 6.0
mm (15/64" ) in width.
2. The rubber pins will be discontinued.
3. The slide plate installing portion of the base will be lowered. So the dimension (A) will be changed from 20.2 mm (0.795" )
to 20.4 mm (0.803" ). The current type base and the new type base are interchangeable.
LS1030 (Miter Saw)
Slide plate installing portion of base
Rubber pin 4 Slide plate
Base
3.8 mm (5/32" ) 6.0 mm (15/64" )
0.3 mm (0.0012" ) 0.5 mm (0.002" )
Dimension (A): 20.2 mm (0.795" )
20.4 mm ((0.803" )Top surface of base

From serial No. 251934E
Enforcement schedule
Interchangeability(I/C)
Current part New part
Slide plate
344035–4
Slide plate
343642–0
Note
Q'ty Q'ty
No
I/C
3
Item No.
3Interchangeable as a set
Rubber pin 4
263002–9 3
Base
316161–9
Base
316161–9 Yes 11
94