Makita RT0700C User manual

Easy-to-Customize
Convenient Tool Bag (option)
Standardized intervals between base plate setting screws enable to
use various Base plates for a wide range of applications.
Square-shaped tool bag with
standardized size of inner tray enables to
put various items into the bag such as
Guide rail adapter set, Router bit set,
Motor unit, Base assemblies, etc.
Trimmer
RT0700C 6mm (1/4”), 8mm (3/8”)
Continuous rating Input
Capacity
No load speed (rpm)
Dimensions (L x W x H)
Net Weight*
Power supply cord
710W
Collet : 6mm, 8mm or 1/4”, 3/8"
10,000-30,000
89x89x200mm (3-1/2"x3-1/2"x7-7/8")
1.8kg (3.9lbs)
2.5m (8.2ft)
Items of standard equipment and specications may vary by country or area.
*weight according to EPTA-Procedure 01/2003
411
4 Dierent Base Assemblies
for Added Versatility
Trimmer base
Plunge base (Option)
Oset base (Option)
Tilt base (Option)
Standard Equipment :
Trimmer Base Assembly, Straight Guide, Collet Cone (2pcs), Wrench (2pcs)
Double Insulation
Variable Speed
Constant Speed
Soft Start
Convenient for cutting workpiece
using guide rule, auxiliary wood
fence
Trimmer base assembly
with Square base plate
Oset base plate with
Grip of Plunge base assembly
Plunge base assembly
with Side grip
Convenient for cutting wide
workpiece
Convenient for cutting while
applying weight on one of the two
handles of the base
Grip
Part No. 153489-2
125
100
Makita RT0700C
Competitor "B"
90
Competitor "P"
110
Competitor "R"
0 10050 150
Fast
Slow
Performance Comparison
Note:
1) The test results depend to a great extent on the hardness of materials, etc.
2) The numbers in the bar chart below is relative values when the capacities of Competitor B is
indexed at 100.
Cut a 1,000mm long groove in Taun at a depth of 6mm using 6mm straight bit.
Motor unit with Trimmer base assembly
Work Speed
Dust Collecting
Satisfy Professional's Needs
Trimmer
RT0700C
PRINTED IN JAPAN BB-BC
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan

with Trimmer base with Tilt base (option)
with Plunge base (option) with Oset base (option)
Available in various combinations for
added versatility
Precision cutting depth
adjustment
Precision cutting depth
adjustment
Enlarged opening section of
base assembly for excellent bit
visibility while maintaining
durability.
Enlarged opening section of
base assembly for excellent bit
visibility.
Optional Fine adjusting straight
guide can be used.
3 stage cut depth adjustment
Easy-to-operate lock lever
Rubberized soft grip
Ergonomically contoured knob
style handles
Ergonomic body grip
easy-to-grasp with one hand
Simple and ecient
base lock system
High durability and accuracy
obtained by using aluminum
for trimmer base
High durability and
accuracy obtained by using
aluminum for plunge base
Non-slip elastomer-covered
body grip for increased
operator comfort.
Round base assembly for smooth and
fast cutting with easy handling
Precision cutting depth adjustment
Plunge capacity: 0 - 35mm (0 - 1-3/8")
Tilting capacity: -30˚ to 45˚
Able to trim close to wall and tight corners
with a bit set in oset position.
18mm
18mm
18mm
Ergonomic body grip easy-to-grasp with one hand
Shaft lock, Flat-top design and Horizontally installed power
supply cord provides stability for easier bit change.
High durability and accuracy
obtained by using aluminum for
body housing
Accepts 6mm & 8mm collets,
1/4" & 3/8" collets.
Variable speed
control by dial
Motor unit
High Power
710W
RT0700C is a high power,
durable and accurate Trimmer.
Simple and ecient
base lock system
High durability and
accuracy obtained by using
aluminum for base holder
Replaceable,
non-marring plastic
base protector for protection
of base plate and smooth sliding on work surface
Non-slip elastomer-covered
body grip for increased
operator comfort.
Simple and ecient
base lock system
Non-slip elastomer-covered
body grip for increased
operator comfort.
Replaceable,
non-marring plastic
base plate for protection of
oset base and smooth sliding on work surface
High durability and
accuracy obtained by
using aluminum for
oset base
Replaceable, non-marring
plastic base plate for protection of
plunge base and smooth sliding on work surface
Replaceable, non-marring
plastic base plate for protection
of trimmer base and smooth sliding on work surface