Makita 4013D User manual

N MANUAL

...,....
...,h*%
SPECIFICATIONS
Model I Ratedvoltaae I Capacity 1 Dimensions(Lx W x H) I Netweight
Manufacturerreservesthe right to change specificationswithout notice.
Specificationsmay differfrom country to country.
IMPORTANTSAFETY INSTRUCTIONS
USAOlP-1
When usingan electricalappliance,basicprecautionsshould always
befollowed, includingthe following:
READ ALL INSTRUCTIONSBEFORE USING THIS APPLIANCE
1.
2.
3.
4.
5.
6.
7.
2
Do not leave appliance when battery fit-
ted. Remove battery from appliance when
not
in useandbeforeservicing.
Do not exposeto rain. Storeindoors.
Do not allow to be used as a toy. Close
attention is necessary when used by or
nearchildren.
Useonly as described
in this manual.Use
only manufacturer's recommended
attachments.
Do not use with damagedbattery. If appli-
ance isnot working as
it should, hasbeen
dropped, damaged, left outdoors, or
dropped into water, return it to a service
center.
Do not handleappliancewith wet hands.
Do not put any object into openings. Do
not use with any opening blocked; keep
A WARNING:
To reduce the riskof fire, electric shock or injury:
free of dust, lint, hair, and anything that
may reduceair flow.
8. Keep hair, loose clothing, fingers, and all
parts of body away from openings and
movingparts.
9. Turn off all controls before removing the
batterycartridge.
10. Useextracarewhen cleaningonstairs.
11. Do not use to pick upflammable or com-
bustible liquids, such as gasoline, or use
inareaswherethey maybepresent.
12. Useonly the chargersupplied bythe man-
ufacturer torecharge.
13. Do not pickupanything that isburningor
smoking, such as cigarettes, matches, or
hotashes.
14. Do notuse without filters in place.
15. Do notchargethe batteryoutdoors.

SAVE THESE INSTRUCTIONS
This appliance is intended for householduse.
ADDITIONAL SAFETY RULES
USEO62-1
Read this instruction manual and the 4.
charger instruction manual carefully
beforeuse.
Do not pickupwet materials, lit cigarettes
or the like.
Stop operation immediately if you notice
anything abnormal.
5.
6.
If you drop or strike the cleaner, check it
carefully for cracks or damage before
operation.
Do not bringclose to stoves or other heat
sources.
Do not block the intakehole or vent holes.
SAVE THESE INSTRUCTIONS
3

FUNCTIONAL
DESCRIPTION
Model
4013D
4033D
1. Batterycartridge
2. Pushbutton
Batteries
1220,1222,1234,1235,1200,1202,
1202A
1420, 1422, 1434, 1435
W1585
A CAUTION:
Always be sure that the cleaner is switched off and the
battery cartridge is removed before adjusting or
checkingfunctionon the cleaner.
Installing or removingbattery cartridge
Always switch off the cleaner before insertionor removal
of the battery cartridge.
To remove the battery cartridge, withdraw it from the
cleaner while pressing the buttons on both sides of the
cartridge.
To insert the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert
it all the way until it locks in
place with a little click. If not, it may accidentally fall out
of the cleaner, causing injury
to you or someone around
you.
Do not use force when inserting the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
Installing set plate(Optionalaccessory) for 4013D
only
Always install the set plate when using battery cartridges
1200, 1202or 1202A. Installthe set plate on the cleaner with
the screw provided.
1. Screw
2. Set plate
Charging
Charge the battery cartridge with your Makita charger prop-
erly beforeuse.
Followingbatteriescan be usedfor this cleaner;
4

Switch action
A CAUTION:
Always be sure that the dust bag or paper filter is
installed properly in the cleaner before use. Improper
installationmay allow dust to enter the motor, resultingin
malfunctionof the cleaner.
Always switch off the cleaner after each use to prevent
damage
to the cleaner andto lengthenthe service life of
the batteries.
W15f
I
To start the cleaner, slide the switch lever forward to the “I”
position.
To stop the cleaner, slide the switch lever back to the “0
position.
1. Switch lever
ASSEMBLY
A CAUTION:
Always be sure that the cleaner is switched off and the
battery cartridge is removed before carrying
out any
work onthe cleaner.
0015
Dust disposal
A CAUTION:
Empty the cleaner before it becomes too full, or the
suctionforce weakens.
Depressthe buttonsandopenthe front cover.
5

001%
A
Take the dust bagout of the cleanercarefully so that the con-
tents will not spill out.
Emptythe contents out of the dust bag.
Also empty out the dust insidethe cleaneritself. Failure to do
so may cause the sponge filter to be clogged or the motor to
be damaged.
M, 6'
Place the dust bag intothe cleaner cavity.
Insertthe holder of the dust bag all the way into the slots in
the cleaner cavity.
A CAUTION:
Forgetting to install the dust bag, failure to insert the
holder of the dust bagallthe way intothe slots or usinga
broken
or ripped bag, may allow dust to get into the
motor.This may result inmotor failure.
6

~1593
Hook the front cover onto the front lip of the cleaner. Then
close the front cover.
1. Hook
2. Front lio
NOTE:
When installing the paper filter, follow the same
proceduresfor the dust bag.
Always unfold a new paper filter before installing it onthe
cleaner.
W1594
Corner nozzle storage
When not in use, the corner nozzle can be conveniently
stored inthe cleaner body.
1. Cleaner body
2. Corner nozzle
OPERATION
~1595 Cleaning(Suction) Nozzle
Attach the nozzle to clean off tables, desks, furniture etc.
Nozzleslips on easily.
1 Nozzle
7

001596
Nozzle + Extensionwand (Straight pipe)
The extension wand fits in between the nozzle and the
cleaner itself.This arrangement is convenient for cleaning a
floor while standingerect.
I. Cleanerbody
2. Extensionwand
3. Nozzle
W159
Corner nozzle
Fit on the corner nozzle for cleaning corners and crevices of
a car or furniture.
1. Cleaner body
2. Corner nozzle
001598
Corner nozzle + Extensionwand (Straight pipe)
In tight quarters where the cleaner itself cannot squeeze in,
or inhigh placeshard
to reach, usethis arrangement.
1. Cleanerbody
2. Extensionwand
3. Corner nozzle
0015!
The cleaner is possible to suck dust without nozzle, too.
8

MAINTENANCE
001600
001601
Ni-Cd
A CAUTION:
Always be sure that the cleaner is switched off and the
battery cartridge is removed before carrying out any
work onthe cleaner.
After use
When storing the cleaner, hang it from a nail usingthe con-
venient hanger in back.
Cleaning
From time to time wipe off the outside (cleaner body) of the
cleaner usinga cloth dampened insoapy water.
Never use gasoline, thinner or the like. Discoloration or
cracks may result.
Wash the dust bag in soapy water occasionally. Dry it out
thoroughly before use. An insufficiently dried bag may cause
poor suction and shortenthe service lifeof the motor.
To maintainproduct SAFETY and RELIABILITY, repairs, any
other maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always using
Makitareplacement parts.
ENWOl 1
Recyclingthe Battery
The only way to dispose of a Makita battery is to recycle it.
The law prohibitsany other methodof disposal.
To recycle the battery:
1. Remove the battery from the tool.
2. a)
or
b)
Take the batteryto your nearest MakitaFactory Ser-
vice Center
Take the battery to your nearest Makita Authorized
Service Center or Distributor that has been desig-
natedas a Makita battery recycling location.
Call your nearest Makita Service Center or Distributor to
determinethe location thatprovides Makita battery recycling.
9
Seeyour local Yellow Pages under “Tools-Electric”.

Model
4013D
4033D
10
Batterycartridge Batterycharger
1220/1200 DC1470
1202/1202N1222/
123411235 DC1411 DC1422
1420 DC1470
1422/1434/1435

Memo
11

Memo
._. ... .-.- ....... ...... ..... .... - ...................
.................... ................ ....
.........
.............. ....... ..... .... ......
12

I
I
I
I
+
2
0
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
1
I
I
I
I
Makita U.S.A., Inc.
14930 Northam Street
La Mirada,
CA 90638-5753
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII,IIIIIIIIII
postage
Required
Post MIlCe Wlll
not deliver
wthoul proper
postage
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I

MAIL THIS PORTION
DATE PURCHASED
Your answer to the following questionsare appreciated.
1. This product was purchasedfrom:
0 Home Center 0 Other ( ) 0 Magazine 0 Radio
0 Hardware/LumberStore 0 From Dealer 0 Exhibition
0 Tool Distributor 0 Newspaper 0 From Friend
0 IndustrialSupply 0 Store Display 0 PreviousUsage
3. How did you learnof aboutthis product:
Construction Supply 0 Catalog Other ( )
2. Useof the product is intendedfor:
4. Mostfavored pointsare:
MODEL NO.
0 ConstructionTrade
0 industrial Maintenance
0 Home Maintenance
0 Hobby
0 Other ( )
5. Any comments:
0 Design 0 Repair Service
0 Features 0 Durability
0 Size 0 Power
0 Makita Brand
0 Price 0 Other ( )
MONTH DAY YEAR I
SERIAL NO.
I m I1
iNTL. LAST NAME / COMPANY NAME STATUS SEX
Married Single M F
STREET
IIlIllI1lIllIlII ADRESS
CITY
AREA
CODE
STATE ZIP CODE PHONE
Ill/
AGE: 0 Under 19 0 20-29 0 30-39 40-49 c] 50-60 0 Over 60
BE SURETO COMPLETE THE CUSTOMER'S PORTION OF THIS FORM AND RETAIN FOR YOUR RECORDS
Please returnthis portion by facsimileor mail.
Facsimile No: [phone]

FACTORY SERVICE CENTERS
1 -800-4-MAKITA
RETAINTHIS PORTION FOR YOUR RECORDS
ALABAMA
2361 Pelham Paikway
Pelham
AL 35124
(2051620 1791
ARIZONA
3707 E 0roadw.y Rd Slr 6
Phuesix. A2 85040
1802) 437 2850
ARKANSAS
Shacklelad Shopping Center
240 South Shacklelord Rd
Sle c
Little Ruh AR 7221 I
[phone]
CALIFORNIA
41850Ch,,SIy SI
hemoN CA94538 5107
(5,01657 Yea1
1421 N Cio",sA"e Slr; 112
Fresno CA 93721
15591 252 5166
14930 NailhamSI
La Miiada CA HY%E 5753
1714,522 8088
1970 Fullan Avenue
Sa~rameillo CA 95825
lY16) 482 5197
,440 saum E Stlee,
ban Beindrdnu CA911OR
[phone]
7614 Clairemont Mesa Blvd
Sasi Dieyo CA 921 1 I
(858,278 4471
1/IIEM1FaddenAr* IJnilM
Sanla Alia CA 92705
1114)6575066
1565 WinLhesfel B
Campbell CA 95011
1408) 379 0377
COhlNECTlCUT
5oR Spllng SI
wlndsol LOC*~ cr os096
18601 292 b405
FLORIDA
620 DooglasAve Suite 1302
Allamoale Spmgs. FL 37714
1401) 774 6mu
1301 W Copans Road
PomparioBeach FL 33061
[phone]
Thompbm Cantel Walrir
5501 W Walerr Avo Sle 406
lampa FL 33634
(n~3188682~2
GEORGIA
4680 Rlvel Gleen ParkwayNW
Diilulh GA 20x5
(7701 416 891 1
HAWAII
1510 Salt Lake BM SWc A7
Honolulu HI 96818
I8081847 0038
CUSTOMER'S RECORD
KENTUCKY
1215s Hu!slburnr Parkway
Louisville KY 40222
15021326 3740
LOUSIANA
5626 JsHersw Huy
Harahaii LA 70123
[phone]
MARYLAND
7541 45 Riichia Highway
Glen Buriiie MD 21061
14,0)5moIw
MASSACHUSETTS
232 Providence Hwy
16171461 9754
wrsiwoorl MA o2nw
MICHIGAN
37154 Mri Arbu Tiail
Lvoilia MI 48150
13131432 1012
MINNESOTA
6127 Pew Ave South
nichliald MN 55423
(612)8695199
MISSOURI
9876Walsoon
Road
st LOUlS MO83126 222,
(314) 9w 9889
NEBRASKA
4129s 84thSI
Omaha NF68127
14021 597 2YZ5
NEVADA
3375 S De~alor Blvd
Soles 22 24
tasvqas ~~8~02
(102)hR4277
NEW JERSEY
NEW MEXICO
5805 Menaul Blvd NE
Albiiqueiqiie NMBII
10
(5051sBl 4619
NEWVORK
491 7 Gene5S.m sttee,
Cheeklowaga NY 11225
Ill61685 9503
131 3531sIAve
flushing NY I1354
1118)8860Y11
NORTH CAROLINA
3501 G S Tryos S1
Chrilolla NC28217
[704)527 0611
OHIO
6253 E Main SI
Cdombus OH 43213
lT.i418W 0222
6379 %ail Road
Paima Heights OH 44130
(4401843 7555
1SIIE KemperRd
Shalonullle OH 15216
(5131771 0788
OKLAHOMA
552 E Memorial Road
[phone]
Oklahoma cmIy OKi3, I4
OREGON
828 19th Aveiiuo N W
billand OR 972W
PUERTO RlCO
1M Guayama SI
HabRey PRW917
17871 250 6776
TENNESSEE
1655 Nolevrallr Rd
Nashville TN 3721 1
16151331 9922
TEXAS
FarmeisBiari~h
TX 75234
1972174J It50
12701 Uiiectors DI
1281) 565 8665
34531H35Noifh 51 101
[phone]
12801
stemmans F~~ sie 808
siaiiord rx77477 3701
san~lliu~i~u TX IRZIQ
UTAH
SallLaksCily UT84115
(801135'33410
145~ imns ste io1
VIRGINIA
57W Northampton Hlvd 5le
102
Vrginia Beaih VA 23455
1757) 460 0280
WASHINETOH
22220 84th Avs bo Bldg A
Ken1
WA 98032
1253) 395 8055
WISCONSIN
Lincoln Plaza Shopping Ctr
2215 S lmlh SI West Allis Wi
53227
14141541 4776
When you need SBNICB Send
complete tool (prepaid)to one
of the Makita Factory Service
Centers listed
or to an Authorized
MakitaServiceCenter Besure
to attach aletterto the outside 01
the cartondetailing the problem
with your tool
DatePurchased
I
Dealer's Name 8 Address
Model No I
Serial No I
15

MAKITA LIMITED ONEYEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspectedand testedbefore leavingthe factory. It is warranted to befreeof
defectsfrom workmanship and materialsfor the periodof ONE YEAR from the dateof originalpurchase.
Should any troubledevelop duringthis one-year period,returnthe COMPLETEtool, freightprepaid,
to one of
Makita'sFactory or Authorized Service Centers.
If inspectionshows the trouble iscausedby defective
workmanship or material,Makitawill repair (or at our option, replace) without charge.
This Warranty does notapply where:
repairshavebeen made or attemptedby others:
repairsare requiredbecause of normalwear and tear:
The tool has beenabused, misused or improperly maintained:
alterationshave beenmade to the tool.
INNO EVENT SHALL MAKITA BE LIABLE FOR ANY INDIRECT,INCIDENTAL
OR CONSEQUENTIAL
DAMAGES FROMTHE SALE OR USE OFTHE PRODUCT. THIS DISCLAIMERAPPLIES BOTH DURING
AND AFTER THE TERM OFTHIS WARRANTY.
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED WARRANTIES, INCLUDING IMPLIEDWARRANTIES OF
"MERCHANTABILITY"AND "FITNESS FOR A SPECIFIC PURPOSE," AFTER THE ONE-YEARTERM
OF
THISWARRANTY.
ThisWarranty gives you specific legal rights,and you may also have other rightswhich vary form stateto state.
Some statesdo not allow the exclusion or limitationof incidentalor consequentialdamages,
so the above
limitationor exclusion may notapply
to you. Some states do notallow limitationon how longan implied
warranty lasts,
so the above limitationmay not apply to you.
MakitaCorporation