Mammoth Classic Air Purifier User manual

Classic Air Purier
USER GUIDE
1
For Air as Pure as the Ice Age

PLEASE READ ALL OF THE INFORMATION PROVIDED IN THIS USER’S
GUIDE BEFORE OPERATING YOUR NEW AIR UNIT.
WARNING: This air unit is not a medical device. Do not stop or alter any
medical therapy programs or medications without the advice of your
physician. Excessive ozone concentrations may cause mucous membrane
or respiratory irritation.
CAUTION: This unit is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision concerning use of the unit
by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the unit.
Mammoth Classic Air Purier User Guide
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE
BACK COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
This “EXCLAMATION POINT” calls attention to a feature for
which you should read the enclosed literature carefully to prevent
operating and maintenance problems.
This “BOLT OF LIGHTNING” indicates that insulated material
within your unit may cause an electrical shock. For the safety of
everyone, do not remove product covering.
RISK OF ELECTRICAL SHOCK DO NOT OPEN UNIT
warning!
© 2012 Mammoth Classic Air Purier | Version 2012
2

Mammoth Classic Air Purier User Guide
Congratulations on your purchase of the Classic Air Purifier system! You
have obtained a state-of-the-art air purication system with solid wood cabinetry.
Only the nest materials surround the nest air purication technology. We hope
that you will enjoy your purchase for years to come.
READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
Please record the model and serial number below, for easy
reference, in case of loss or theft. These numbers are located on
the back panel of your air purication unit. Space is also provided
for other relevant information.
Model number:________________________________________
Serial Number:________________________________________
Date of Purchase:______________________________________
Purchased From:______________________________________
FOR YOUR RECORDS
Visit us at: www.mpurifier.com For Question Call: 800.470.4201 3

Ionizer ON/OFF On/Off control switch activates needle-point ionizer
& Fan Speed and controls the fan speed- Clockwise (low to high). The
unit will not function unless the fan control is on.
Ozonator Ozone generator will only turn On when user turns the
Ozone dial Clockwise (low to high). This function can be
left Off while the Fan is On if Ozone is not desired
(recommended setting for most occasions) until needed.
Fan Grill Removable fan grill. Wash with warm soapy water, dry
completely before replacing.
(Unplug unit before removing)
PART FUNCTION
Ozonator
Fan Grill
Ionizer
Control for the negative ion generator is separate from the O3 control. Negative
ions can be created around the clock to keep down dust and particulate.
O3 also known as activated oxygen is normally kept at modest levels in occupied
spaces. To remove heavy odors, the units may be adjusted to a higher level for
a period of time. Some use a timer to completely deodorize the home or office
while away. Unused O3 reverts back to O2 in about an hour.
Understanding the Air Purifier (Front View)
Mammoth Classic Air Purier User Guide
© 2012 Mammoth Classic Air Purier | Version 2012
4

Plate Receiver Slot Allows insertion and removal of ceramic plates for
cleaning.
Fuse Holder Houses removable fuse.
(Spare fuse included, 1 amp, 1.25 inch)
Power Cord 120Voltgroundedcord(unlessotherwisespecied). DONOT
bypass ground wire cord.
Ceramic Plate The Ceramic Plate is removable and washable. Wash with
ammonia and water using a stiff brush or toothbrush. Rinse
thoroughly and dry completely before replacing.
HEPA Filter HEPA lter can be replaced by taking off the screws. HEPA
lter should be replaced every 12 months for optimal
functionality.
Activated Carbon The Activated Carbon lter absorbs contaminants in the air
Filter suchasgassesandodors.TheCarbonltershouldbechanged
every 12 months.
PART FUNCTION
Plate Receiver
Slot
Power Cord
NOTE: As you stand in front of the unit the ionizer will create a slight
charge. If you then touch a metal object there may be a static electric
discharge similar to touching a doorknob in winter.
Understanding the Air Purifier (Back View)
Mammoth Classic Air Purier User Guide
Visit us at: www.mpurifier.com For Question Call: 800.470.4201 5

OPERATION/INSTALLATION
If desired, install the Ozone plates in the plate receiver slot (see diagram on
previous page) Air Purier will function with or without the Ozone plate installed.
To install the Ozone Plate, remove the HEPA from the rear part of the unit and x
it by the screws (Make sure the unit is turned OFF when taking out the HEPA to
protect against electric shock).
Start with the Air Purier on its lowest O3 setting and turn the O3 dial “up” as
necessary. The ideal amount of O3 will leave your room smelling clean and fresh.
If the O3 setting is too high, you will smell too much O3 in your home. Keep in
mind traditionally O3 is used intermittently on an as needed basis or long term
with no pets or people around. Within an hour, O3 will break down and revert
back to O2.
The Ionizer is designed to run independently from Ozone production and is on
automatically when the fan is on. The ionizer can be used around the clock to
keep dust and particulate at bay.
Individual sensitivity to O3 and preference may vary and should be adjusted
accordingly. The effect of O3 on indoor air may vary according to atmospheric
and/or environmental conditions such as altitude, humidity, air movement, and
severity of existing odors, house design and square footage.
If you desire to treat the entire home, set the fan switch on your home’s heating &
cooling system to the ON position rather than AUTO. Open all interior doors and
adjust the O3 level to the appropriate setting. Then place the unit so the air from
the purier ows directly into an air return vent.
ALTITUDE: Generally, in higher altitudes the requirement for activated oxygen
decreases. Therefore, higher altitudes should use a lower settings.
HUMIDITY: Generally, in higher humidity the requirement for activated oxygen
increases. Therefore increased humidity may require higher settings. High humidity
will require additional cleaning.
© 2012 Mammoth Classic Air Purier | Version 2012 Visit us at: www.mpurifier.com For Question Call: 800.470.4201
Mammoth Classic Air Purier User GuideMammoth Classic Air Purier User Guide
6

For optimal treatment of air in your designated area, your new air purication unit
should be placed in a central location (higher is better). Your unit can be set on a
tall piece of furniture. Allow three inches between the back of your unit and the
wall to allow proper airow. Fan speed is normally set in the medium range. The
reason for elevated placement of the unit is that O3 is heavier than air. Elevated
placement allows for better circulation. It is suggested that the purier be placed
in the room that is close to the primary source of odor.
WARNING: Excessive O3 concentrations may cause mucous
membrane or respiratory irritation and can be harmful. If you smell
ozone when you enter a room, turn the O3 dial down to a lower or OFF
setting.
© 2012 Mammoth Classic Air Purier | Version 2012 Visit us at: www.mpurifier.com For Question Call: 800.470.4201
Mammoth Classic Air Purier User GuideMammoth Classic Air Purier User Guide
7

Mammoth Classic Air Purier User GuideMammoth Classic Air Purier User Guide
© 2012 Mammoth Classic Air Purier | Version 2012 Visit us at: www.mpurifier.com For Question Call: 800.470.4201
Because of its high reactivity and its ability to destroy microscopic organisms,
Ozone has the reputation of being a highly effective air purier. Whatever your
needs are, the ozone feature can be used in a variety of locations: hotels, hospitals,
stores/shops, ofces and Residential spaces. All types of air-conditioned spaces
that utilize this product are able to transform a smoky and smelly area into a clean
air scent and freshen the environment.
Ozone is one of the cost effective solutions when compared to all other types of
technology on the market today.
Here are few of the ozone function’s positive benets:
• Actively defends you from contaminants, impurities and unwanted bacteria in
the environment without having to pull air through the air purier.
• Decreases viruses and unhealthy bacteria from the surroundings therefore
lessening the growth of ailments like pneumonia, tuberculosis and other
sicknesses.
• Reduces the risk of allergies, bacterial or viral infections, hay fever and respiratory
problems to some extent.
Something to keep in mind- the use of the ozone setting in your commercial
or residential space is not meant to be ON constantly. For the safety of
residents and individuals in the area where the ozone is on, it is recommended
that the ozone feature be kept on while people and pets are not present in the
room. Although the Classic Air Purier has ozone output levels below the legal
standard, overexposure can cause the following:
• Decreased lung function
• Aggravation of asthma
• Throat irritation
• Headaches
Ozone is NOT necessary. The air purier will work without ozone feature ON
or without the plate being inserted. Should you have the ozone plate inserted,
the Classic Air Purier has a separate Ozone knob that can be turned off
independently.
IMPORTANT NOTE ABOUT THE OZONE FEATURE
• Cough
• Chest Pain
• Shortness of breath
• Inammation of lung tissue
8

Mammoth Classic Air Purier User GuideMammoth Classic Air Purier User Guide
© 2012 Mammoth Classic Air Purier | Version 2012 Visit us at: www.mpurifier.com For Question Call: 800.470.4201
Some users who are sensitive to ozone set their units up on a timer so that the
purier does its work only when they are away from home. This allows for a
higher setting and higher concentrations, which can be more effective for purging
purposes. The ozone will normally dissipate in less than an hour after the purier
is turned off. Simple timers plug into an outlet and are available at hardware and
variety stores
• Homes & Living Areas
• All types of ofces & stores
• Water & re damaged areas
• New paint & wallpaper areas
• Odor clean-up
• “Sick” buildings
• Hospitals & nursing homes
• Veterinary ofces
• Smoking areas
• Hotel rooms
Should you determine that your air unit requires service, please contact your local
dealer.
CAUTION: No attempt should be made to remove the back panel of
the unit, as there are no user serviceable parts.
• High pollen environments
• New carpet furniture & Rooms
• Kitchens
• Attics & basements
• Laundry rooms
• Doctors’ ofces
• Day care centers
• Stables & aviaries
• Locker rooms
• Restaurants & bars
USING A TIMER
WHERE TO USE
SERVICE
9

© 2012 Mammoth Classic Air Purier | Version 2012 Visit us at: www.mpurifier.com For Question Call: 800.470.4201
Mammoth Classic Air Purier User GuideMammoth Classic Air Purier User Guide
When the purier no longer produces enough ozone to be effective, the ozone plate
should be cleaned. A good rule of thumb is every month. Some environments
cause ozone output to be reduced in a shorter time but other environments may
take longer.
To clean a plate, rst turn the unit OFF and UNPLUG from outlet. Then remove
the 4”x4” plates from back of unit. Pull plates rmly in the center to remove from
the slot. With plate rmly supported in the hand apply a solution of warm water
and ammonia (50/50 solution is suggested) or a strong grease cutting detergent.
Scrub with a stiff brush if necessary. Be careful not to drop the plate or scrub off
the silicon. Clean both the metal screen and the ceramic tile. Rinse plate in hot
water and DRY COMPLETELY before installing. If available you may use a hair
dryer to dry the plate. Reinstall plate, making sure it is secured and ush with the
back of the unit. Plug unit into a grounded electrical outlet; turn unit on and start
enjoying clean fresh air.
To clean needlepoint ionizer, rst turn OFF and UNPLUG from outlet. Remove the
fan grill cover. The needle point ionizer will be easy to nd in front of the fan by
looking for two pieces of wire. Take a q-tip or cotton swab dipped in alcohol and
clean any dust that may have accumulated on the needlepoints. This process
may be done when plates are being cleaned. While you have the front grill cover
off the unit you may also clean the fan and grill itself. To clean the fan, simply wipe
the blades with a damp cloth or vacuum. The grill cover may also be cleaned
with warm soapy water. Be careful that the fan grill cover is completely dry before
installing.
CLEANING AND MAINTENANCE
10

© 2012 Mammoth Classic Air Purier | Version 2012 Visit us at: www.mpurifier.com For Question Call: 800.470.4201
Mammoth Classic Air Purier User GuideMammoth Classic Air Purier User Guide
If you suspect a problem with your unit check the following:
• Make sure plate is clean (see above).
• Unit is plugged in properly and turned on.
• Check the fuse to make sure it is installed properly and not burned out. To
replace fuse, push in and turn fuse holder to the left, remove old fuse, replace
with spare. Use 1 amp fuse, 1.25 inches long.
• Wall outlet is active
• Check plate alignment making sure the ceramic plate is almost ush with
back of unit.
• It is important that the Classic Air Purier be properly grounded to avoid
potential shock. If the fan is not operating or after cleaning the plate no
buzzing sound is detected on the high setting of the O3, please contact your
local dealer.
TROUBLESHOOTING
11

Mammoth Classic Air Purier User GuideMammoth Classic Air Purier User Guide
© 2012 Mammoth Classic Air Purier | Version 2012 Visit us at: www.mpurifier.com For Question Call: 800.470.4201
Q. How does the Classic Air Purifier compare to air filters?
A. The Classic Air Purier has both active and passive air purication. Passively,
it uses both HEPA and Carbon lter to trip small particles and odors. Actively,
the Classic Air Purier produces both activated oxygen and negative ions to
remove strong odors and settle out particulates, like dust.
Q. Is ozone safe?
A. Ozone in very high concentrations can be irritating to mucous membranes and
the respiratory system. We recommend you set the O3 dial properly, either for
short-term temporary use (in less than ve (5) minutes) or for longer-term use
with no pets or people are around.
Q. Where should I place the Air Purifier in my home or office?
A. The Classic Air Purier should be placed in the room where you have the most
pollutants. The purier is lightweight and easy to move so it is recommended
that you try placing it in a couple of locations to help decide what works best
for your environment. An elevated location is better to distribute ions and
activated oxygen more evenly. The Classic Air Purier works best if it is placed
within 10 feet of a cold air return from an AC duct.
Q. What is the life expectancy for the Classic Air Purifier?
A. The Classic Air Purier is made of stainless steel and solid wood construction.
Because of the quality material and superior craftsmanship that goes into each
air purier, you can enjoy it for many years to come.
Q. Is the Purifier difficult to install?
A. No, the Classic Air Purier is easy to set up. For use without O3, the air purier
is already ready to be used. For O3, simply install the O3 plates (located in a
separate box packaged inside the carton), plug it in, and turn the separate O3
dial. Install the Classic Air Purier in any room with the purier recommended
four (4) or more feet off the ground.
Q. What does the Air Purifier do?
A. The Classic Air Purier is designed to trap 99% of the bacteria, mold, and
allergens in your home or space. It treats the air in your home or ofce by
breaking down odor causing pollutants and dropping airborne particulate from
your breathing space.
COMMONLY ASKED QUESTIONS
12

Mammoth Classic Air Purier User GuideMammoth Classic Air Purier User Guide
© 2012 Mammoth Classic Air Purier | Version 2012 Visit us at: www.mpurifier.com For Question Call: 800.470.4201
Q. How does the Air Purifier treat the air?
A. The Classic Air Purier produces ozone and negatively charged ions, in the
same way nature uses these effective cleansing agents to treat outdoor air.
Q. How does the Classic Air Purifier work?
A. The purier effectively traps 99% of pollutants through a three-stage process:
1. The Classic Air Purier uses a needlepoint ionizer to drop dust, smoke and
other harmful particles from the air we breathe. In our homes and ofces there
are a lack of negative ions and an abundance of positive ions. The buildings
we spend most of our time in block out the natural occurring negative ions.
The Classic Air Purier recreates the natural balance of positive to negative
ions to signicantly reduce airborne particulate.
2. This Purier uses electricity to split oxygen O2 molecules into single O1
atoms, which attach loosely to other O2 molecules to become O3 (activated
oxygen). This loosely attached oxygen atom is unstable and seeks to bond
with chemical compounds and other odor causing pollutants in order to
oxidize them.
3. HEPA lters are effective at capturing dust, mold, pollens, allergens and
other solid particles as small as 3 micron. Through a very ne paper-like lter,
the pollutants in the air pass through the HEPA lter and are trapped. At this
point, any bacteria and particles die because the HEPA lters are dry and
sterile, preventing any future growth.
Q. How does nature produce ozone?
A. Ozone is created electrically during active thunderstorms. The electrical
discharge creates a fresh sweet smell. The ultraviolet rays of the sun striking
hydrocarbons in our atmosphere also create ozone.
Q. How does nature produce ions?
A. Waterfalls, lightning, and the waves of the ocean all create negative ions.
13

14
QUESTIONS AND SUPPORT:
Our Business Hours is Monday to Friday, 10am-4pm (PST)
Call 800.470.4201 or email support@mpurier.com
Thank you for your business. Your family and loved ones will be
enjoying fresh air in the years to come!
MAMMOTH AIR PURIFIER 23755 Madison Street, Torrance, CA 90505
www.mpurier.com | 800.470.4201
Table of contents
Other Mammoth Air Cleaner manuals