MANCHESTER WOOD SHAKER DESK User manual

SHAKER DESK
Thank you for purchasing our Shaker Desk. Assembly of this product
requires the use of a 7/16” wrench or an adjustable wrench and a Phillips
screwdriver. We have found it helpful to have second person assist with
assembly.
470

STEP 1
Read through these instructions thoroughly
before beginning assembly. We have
found this to be of great value when first
assembling this product.
STEP 2
Remove all parts and hardware from
packing material. Wooden pieces should
be placed on a non-abrasive surface (like
the carton or carpet) to prevent damage to
the finish.
STEP 3
Identify all parts using diagram at right
STEP 4
Identify and count hardware using
diagram at right.
STEP 5
Lay Top Assembly (A) upside down
on a non-abrasive surface.
STEP 6
Place a Washer on each Lag Bolt.
Align hole in Leg (B) with hole in
corner of Top Assembly (A). Attach
Leg (B) to Top Assembly (A) by
inserting (1) Lag Bolt through corner
bracket of Top Assembly (A) and into
predrilled hole in Leg (B). Tighten
with a wrench. Repeat this step for
each Leg (B).

STEP 7
Attach Pewter Knobs to Drawer
(C) by threading 1-1/4” Pull
Screw through predrilled hole in
Drawer (C) and into Drawer Pull.
Tighten with a Phillips
screwdriver.
STEP 8
Turn desk upright onto its legs
and insert Drawer (C) into
opening in Top Assembly (A).
CARE
Dust as needed with a soft cloth.
Clean with damp cloth and mild
solution of dish soap. Polish with
soft cloth and polish that contains
no pigments or silicone.
www.manchesterwood.com
Product Support 1-800-660-6930