MANCHESTER WOOD 470 User manual

COMPACT SECRETARY DESK
Thank you for purchasing our Compact Secretary Desk. Assembly of this
product requires the use of a Phillips screwdriver and a hammer. We have
found it helpful to have second person assist with assembly.
480

STEP 1
Read through these instructions thoroughly
before beginning assembly. We have
found this to be of great value when first
assembling this product.
STEP 2
Remove all parts and hardware from
packing material. Wooden pieces should
be placed on a non-abrasive surface (like
the carton or carpet) to prevent damage to
the finish.
STEP 3
Identify all parts using diagram at right
STEP 4
Identify and count hardware using
diagram at right.
STEP 5
Lay Top Assembly (A) upside
down on a non-abrasive
surface.
STEP 6
Align holes in Back Stretcher
(D) with holes in metal brackets
on Top Assembly (A). Attach
the Back Stretcher using (2)
1/2” Screws.

STEP 7
Attach Front Stretcher (C) to Side
Assembly (B) using (1) 1-1/4” #8
Screw by inserting it through the
hole in the Side Assembly and
tightening it into the predrilled
hole in the Front Stretcher.
Note: Ensure that the Front
Stretcher (C) is attached through
one of the holes closer to the
bottom of the Side Assembly (B).
STEP 8
Attach Side Assembly (B)
to Top Assembly (A) using
(3) 1-1/4” #8 Screws, with
one screw being inserted
into the predrilled hole in
the skirt of Top Assembly
(A), and the other two
screws being inserted into
the predrilled holes in Back
Stretcher (D).
STEP 9
Attach the other Side Assembly
(B) to Top Assembly (A) using
(4) 1-1/4” #8 Screws. Two being
inserted into the predrilled holes
of Back Stretcher (D), and the
other two being inserted into the
predrilled holes in the skirt of Top
Assembly (A) and the end of
Front Stretcher (C).

STEP 10
Attach Pewter Knobs to Drawer
(C) using (2) 1-1/4” Pull Screws
STEP 11
Lightly tap flush plugs into the
holes in Side Assemblies (B) that
were used to assemble the unit.
STEP 12
Place the Drawer (E) into the
opening in the front of the desk.
CARE
Dust as needed with a soft cloth.
Clean with damp cloth and mild
solution of dish soap. Polish with
soft cloth and polish that contains
no pigments or silicone.
www.manchesterwood.com
Product Support 1-800-660-6930