MANCHESTER WOOD AMERICANA 48 BENCH User manual

AMERICANA 48” BENCH
Thank you for purchasing our Americana Bench.
Assembly of this product requires a Phillips screwdriver,
and a hammer. We have found it helpful to have a second
person assist with assembly.
4100

STEP 1
Read through these instructions thoroughly.
We have found this to be of great value
when first assembling this product.
STEP 2
Remove all parts and hardware from
packing material. Place wooden parts on
non-abrasive surface (like carpet or carton)
to prevent damage to finish. Identify all
parts using diagram at right.
PARTS
(1) Top (A)
(2) Side Assembly (B)
(1) Cross Support (C)
STEP 3
Identify and count hardware using diagram
at right. Assembly of this product requires a
Phillips screwdriver and a hammer. We
have found it helpful to have a second
person assist with assembly.
STEP 4
Begin by screwing in 2” #8 screws into Side
Assembly’s (B) predrilled slots and Top (A)
as shown on right. Tightly secure then apply
same action with 1 ¼” #8 screws to Cross
Support (C).
STEP 5
Turn assembled side to surface and follow
same action as Step 4 with remaining Side
Assembly (B). Fasten all screws completely
into unit.
STEP 6
Stand unit upright. Gently hammer Wood
Plugs into now fastened screw holes.
CARE
Dust as needed with soft cloth. Clean with
damp cloth and mild solution of dish soap.
Polish with soft cloth and polish that
contains no pigment or silicone.
www.manchesterwood.com
Product Support 1-800-660-6930