Manhattan Comfort Baxter 216BMC1 User manual

Ed. 003, 2019/02 - Manhattan Comfort.
Baxter TV Stand 53.54
Model # 216BMC1, 216BMC12, 216BMC2, 216BMC21, 216BMC6, 216BMC8,
216BMC9, 216BMC94
888-230-2225
[e-mail]

n.° ID Parts Identification (Description) Quantity
REAR VIEW FINAL APPEARANCE - FRONT VIEW
01
10
1
Front Frame
Left Partition 1
1
Right Side Panel
Middle Shelf 1
1
Left Side Panel
Top Panel 1
01
04
06
07
08
02
05
03
09
Right Partition 1
1
Base
1
Largest Part of the divider "T"
1
Smaller Part of the divider "T"
11 1
Lower Back Panel
12 1
Upper Back Panel
2
INCLUDED IN THE PACKAGE
13 1
Door
14 4
Metallic Feet
15 2
Plastic Profile "H" 380mm
02
03
05
06
04
07
08
09
10
11
11
12
13
15
15
14
14
14
14

14x
A22x BC
D E F
8x
8x 8x 16x
3
GH I
5x 50x 16x
J K
2x 12x
INCLUDED IN THE PACKAGE
TOOLS NEEDED

• Connect the Top Panel (04) onto the
Partitions (01) and (02) and onto
the Side Panels (05) and (06) using
dowels (A) and the Minifix hardware
(C + D), as shown in DETAIL 2.
STEP 1
• Connect the Shelf (03) into
Partitions (01) and (02) with
dowels (A) and bolts (B).
STEP 2
STEP 3
STEP 4
Preparing the door:
• Fix the hinges (J) in the Door (13)
with bolts (K), as shown in DETAIL 1.
13
• Connect the Base (08) into the
Partitions (01) and (02) and into
the Side Panels (05) and (06)
with dowels (A) and bolts (B).
4
DETAIL 1
01
03
02
01
02
03
06
05
04 DETAIL 2
01
02
03
06
05
08
04

STEP 7
• Fix the metallic feet (14) under
the Base (08) with bolts (I).
Pay attention to the position of
the feet, as shown in DETAIL 3.
• Apply the adhesive protective felt to
the lower end of the feet (14).
• Fit the Front Frame (07) under
the Top Panel (04) and between
the Side Panels (05) and (06) and
fix it into the Top Panel (04), the
Side Panels (05) and (06) and
the Partitions (01) and (02) with
metal brackets (E) and bolts (F),
as shown in DETAIL 4.
STEP 6
STEP 5
DETAIL 4
5
DETAIL 3
BOTTOM VIEW / POSITION OF THE FEET
01
02
03
06
05
08
04
STEP 8
14
14
14
14
Assembling the divider "T":
• Connect the Largest Part (09)
into the Smaller Part (10) with
dowels (A) and bolts (B).
Installing the divider "T":
• Install the divider "T" (already
assembled, according to STEP 07),
fitting it through the rear of the
rack between the Right Partition (02)
and the Right Side Panel (06).
ATTENTION! This should always
be done before fasten the back
panels of the rack (see STEP 9),
unless you choose not to install
the divisor "T" in the furniture.
04
07
02
01
05
06
03
08
REAR VIEW
REAR VIEW
REAR VIEW
09
10
09
10
04
03
05
01
08
06
02
Adhesive
Protective
Felt

Fixer and
adjustment
bolts
Installing the door (13):
• Fix the hinge connectors (J) of the
Door (13) on the Left Side Panel (05)
with bolts 3.5 x 14mm (K), taking
the markings on the panel (05) as
reference for correct positioning.
The hinge and connector includes
two more bolts, shown in DETAIL 5.
Use these fixer and adjustment
bolts to tighten, adjust and align
the door.
• Connect the Lower Back Panel (11)
and the Upper Back Panel (12) with
metal plates (G), nails (H) and
Plastic Profiles (15), applying them
to the positions shown in drawing.
STEP 10
STEP 9
DETAIL 5
15
15
6
11
12
04
06
08
REAR VIEW
01
13
05
02
03
06
04
07
08
09
10
11