Manhattan Comfort Vernon 236BMC12 User manual

Ed. 001, 2020/05 - Manhattan Comfort.
888-230-2225
[e-mail]
44
lb
The indicated values consider static weights and evenly distributed over the parts.
Vernon 62.99 Floating
Entertainment Center
Model # 236BMC12, 236BMC6, 236BMC9, 236BMC98
11
lb
8
lb
8
lb
8
lb

n.° ID Parts Identification (Description) Quantity
REAR VIEW
1
1
2
1
2
01
04
06
02
05
03
1
2
INCLUDED IN THE PACKAGE
Lower Panel
Rear Column
Middle Panel
Rear Bar
Lower Shelf
Middle Shelf
07
08
09
10
11
2
Side Panel
2
Partition
06
12
For fixing
behind the panel
For fixing
on the wall
1
Upper Panel
Tilting Door
12 2
Bar for wall
2
01
02
03
1
Closing Plate
03
02
01
07
08
08
09
09
10
10
11
06
12
05 For fixing
behind the panel
For fixing
behind the panel
For fixing
on the wall
04
04
08
07
11

3
TOOLS NEEDED
Simple hammer.Flat head and phillips
screwdriver.
Electric drill and electric screwdriver with
drill bit Ø1/2 inch and phillips tips.
Level indicator.
!IMPORTANT! Two people are recommended to assemble and install this product.
INCLUDED IN THE HARDWARE
8x
A1x B36x
C
20x
D6x E6x (main color) F
20x
G8x
H8x I
J4x K16x L
8x (secondary color)
M8x N
2x
P
8x 4x
O

STEP 2
4
STEP 1
STEP 3
Preparing the Doors (10):
• Fix the hinges (K) on
the Doors (10) with
bolts 4.0 x 14mm (L),
as shown in DETAIL 1.
Coinciding holes
in the panel and
column, for later
fixation to the
wall with the
bushings and
bolts (N).
Coinciding holes
in the panel and
column, for later
fixation to the
wall with the
bushings and
bolts (N).
10 10
Preparing/assembling the parts (07), (08), (09), (10) and (11):
• Connect the Side Panels (08) and the Partitions (09) on the Base (07) with dowels
Ø6 x 30mm (G) and cam lock hardware (H+I), as shown in the DETAIL 2.
At the end, apply the adhesive covers (J).
• Fix the hinge connectors (K) of the Doors (10) on the Base (07) with bolts (L),
taking the markings on the Base (07) as a reference for correct positioning.
The hinge connector includes two bolts, shown in the DETAIL 3. Use these
fixer and adjustment bolts to tighten, adjust and align the doors.
• Connect the Middle Shelf (11) on the Side Panels (08) and on
the Partitions (09) with dowels (G) and cam lock hardware (H+I).
At the end, apply the adhesive covers (J).
• Line the floor with
the foam mantle
of the packing to
protect the parts
and arrange the
Panels (01), (02)
and (03) with the
rear face upwards,
correctly checking
the position of
each one
according to
the holes and
as shown in
the drawing.
• Place the Rear
Columns (04) with
the painted face
forward (for the
panels) and fix
them in the Panels
(01), (02) and (03):
apply the dowels
Ø6 x 20mm (A)
with glue (B) and
then the bolts
3.5 x 25mm (C) in
the positions shown
in the drawing.
10
08
07
10
09
09
08
11
Adjustment
bolt
Fixer
bolt
10
08
07
DETAIL 1
07
08
DETAIL 2
DETAIL 3
03
Rear face.
04
02
Rear face.
01
Rear face.
04

STEP 4
5
STEP 5
• Finish the fastening the Middle
and Upper Panels (02) and (03)
in the Rear Bars (06) applying
the four bolts 4,5 x 25mm (E)
indicated in the drawing and then,
apply the adhesive covers (F).
• Finish the fastening the Lower
Panel (01) to the Rear Columns
(04) applying the two bolts
4,5 x 25mm (E) indicated in
the drawing and then, apply the
adhesive covers (F).
• Insert the plastic cover (R) in
the holes for wires in the Lower
and Middle Panels (01) and (02).
• Fix the Rear Bars (06) behind the
Panels (02) and (03), with bolts
3.5 x 25mm (C), in the positions
shown in the drawing and with
the beveled edge down and
forward (for the panels).
• Fix the Closing Plate (05) behind
the Panels (01) and (02) with the
bolts 3.5 x 12mm (D), in the
position shown in the drawing
and with the painted face forward
(for the panels).
01
Rear face
02
Rear face
03
Rear face
06
06
04
04
05
01
Front face
02
Front face
03
Front face

STEP 6
STEP 7
• Install the set of parts (07),
(08), (09), (10) and (11),
assembled in the STEP 2,
positioning it with dowels
Ø6 x 30mm (G) and
applying bolts 5.0x50mm (M)
to fix the Lower Shelf (07)
and the Middle Shelf (11)
in the Lower Panel (01).
11
08
09
10
10
6
07
01
02
03
45.00in*
Minimum fixing distance
of the Bar (12) for the
panel installation
close to walls corner.
12
1/2 inch hole
in the wall
Kap Toggle
bushing (N)
Bolt 1/4 x 2.1/4
DETAIL 4
13.50in
7.0in
ATENTION!
Before installing the panel, check
the conditions of the wall for
strength to properly support and
anchor the weight of the
suspended furniture, including
equipment and objects that may
be fixed to the panel.
The Kap Toggle bushings (N)
supplied with the product are for
hollow walls or dry wall type.
Check the type of wall on which
the installation will be made and,
if necessary, look for more suitable
bushings or fastening systems.
To mark the position and fix the
Bars (12) on the wall, check the
level of the part.
• Mark the position of the holes
on the wall to fix the Bars (12),
as shown in the drawing and
using the bar itself as a
reference.
• With electric drill and drill bit
Ø1/2", make the holes in the
wall.
• Apply the bushings (N) into
the holes in the wall and fix
the Bars (12) with the bevelled
edge facing up and to the wall,
applying the bolts 1/4 x 2.1/4"
as indicated in the drawing.
* The height of 45.00 inches
indicated in the drawing, between
the floor and the lower edge of
the Bars (12) is only suggestive to
install the Panel with its lower edge
at approximately 17.70 inches
from the floor.
12

STEP 8
STEP 9
7
IMPORTANT! To remove the panel from the
wall, remove the four bolts (N) and moving it
upwards slightly so as to disengage the
beveled edges of the rear bars (06) and (12)
fixed behind the panel and on the wall.
Before moving the panel, remove TV or other
equipment that is fixed on the panel or ensure
that the entire set is safe, preventing falls and
damage to the products.
• With the panel already assembled,
fit the Rear Bars (06) fixed behind
the panel in the Bars (12) fixed
on the wall.
• With the Panel already positioned
and fitted on the Bars (12), mark
the position of the four holes on
the wall to apply the bushings (N),
as indicated in the drawing.
• Remove the Panel and, with drilling
machine and drill bit Ø1/2", make
the holes in the wall, into the four
marked positions.
• Apply the bushings (N) into the
four holes in the wall and replace
the Panel at the installation site.
12
Fixed on the wall.
06
Fixada atrás do painel.
Fijada detrás del panel.
Fixed behind the panel.
03
02
09
01
09
08
08
07
11
10
10
03
02
01
09
09
08
08
07
11
10
10
• With the panel already anchored
in the bars (12) on the wall and
repositioned at the installation site,
apply the bolts 1/4" x 2.1/4" (N) into
the four indicated points, for final
fixing to the bushings already applied
to the wall according to STEP 8.
• At the end of the fixation, apply the
plastic covers (O) to the head of the
four bolts (N).