Manhattan Comfort 5GMC User manual

Stuck? Questions? We are here to help.
1-888-230-2225
[email protected]
1000008345 - 03/04/2020
Assembly Guide
Model: 5GMC
Fortress Floating Garage Cabinet

Do not place the parts directly onto the floor.
Use a cardboard sheet or a mat to place the
parts, during the separation and assembly.
In order to ease the assembly,
you should separate and identify the parts first
Stuck? Questions? We are here to help.
1-888-230-2225
[email protected]
IMPORTANT
In order to avoid severe or even fatal injuries, follow the instructions carefully.
This furniture should be fixed onto the wall, so to avoid possible drops.
Different types of walls demand different types of hardware.
Hardware to fix the furniture to the drywall is included in the kit.
Should your wall be different, please, ask for advice at the hardware store.
* Not included in the kit
STANLY
* Included in the kit
½”
Locking nut, no key tightening required.
Necessary hardware for the assembly, leveling and safety

Hardware list
F14
1000012086
Qty. 3
lb
Maximum weight
supported by
shelf
WARNING
Qty. 1
F17
1000008285
Fortress Floating Garage Cabinet
F7
1000008301
4x
F13
1000011850
1x
F15
1000010159
1x
F1
1000011853
16x
F2
1000011851
16x
F5
1000008778
Qty. 3
F5
Qty. 3
P1
Side
3000007298
P4
Top
3000007299
P16
Wall Fixation Support
3000007235
P8
Upper Back
3000007264
P18
Shelf
3000007301
P1
Side
3000007298
P9
Lower Back
3000007266
P6
Bottom
3000007300
P22
Right Door
3000007302
P23
Left Door
3000007304
44lb
44lb
44lb

STEP 1
STEP 2
2x
F2
2x
F1
2x
F2
2x
F1
P1
P4
P1
P6
P4
1 - Fit part P4 inside part P1.
2 - Fit both parts in the frontal side, with F1 and F2.
1 - Fit part P6 inside part P1.
2 - Fit both parts in the frontal side, with F1 and F2

STEP 4
STEP 3
4x
F2
4x
F1
8x
F2
8x
F1
P1
P1
P6
P4 180°
180°
P1
P1 P6
P4
P1
P4
P6
P1
WARNING
Check that all parts are
correctly supported to
ensure product alignment.
1 - Fit part P4 and P6 insed part P1.
2 - Fit part P1 to part P4 and part P6, at the
frontal side, with F1 and F2.
1 - Turn the cupboard with the back side
upwards
2 - Fit part P1 to part P4 and part P6, at the
frontal side, with F1 and F2.