Manhattan 176811 User manual

MMX
WIRELESS
OPTICAL
MOBILE
MINI MOUSE
USER
MANUAL
Model 176811
MAN-176811-UM-0907-03

Thank you for purchasing the MANHATTAN
®
MMX Wireless Optical
Mobile Mini Mouse, Model 176811.
The easy-to-follow instructions in this user manual help make installation
of the mouse quick and simple, so you’ll also soon be enjoying the
benets of these features:
• 27 MHz technology offers wireless freedom with effective range up to
1.5 m (5 ft.)
• 256 ID codes prevent interference from other RF wireless devices
• Auto power management and detachable cable help maintain battery
levels — recharges while in use for uninterrupted operation
• On-board storage compartment protects USB receiver from loss and
damage
• Compact size, ambidextrous shape and no-slip texture provide a secure
and comfortable grip
• Low-friction base smoothly glides over work surfaces
• Plug and Play installation — Windows compatible
• Lifetime Warranty
Package Contents
• USB Wireless Optical Mouse with Receiver
• 2 AAA batteries and retractable cable reel
• User manual and carrying bag
FCC Statement
This equipment has been tested and found to comply with the limits for
a class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception — which can be
determined by turning the equipment off and then back on — the user
3 3

is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult your MANHATTAN dealer or an experienced radio/TV technician
for help.
INSTALLATION
Built-In Mini Receiver
Press the Receiver Out button and the
mini receiver will pop out of the back of
the mouse. Re-insert the receiver and
the mouse/transmitter power will
automatically be turned off.
Batteries
Press down on the battery compartment cover just behind the Receiver
Out button (as shown above) and slide the cover back to access the
compartment. Insert the two included AAA batteries, matching the
polarity indicators on the inside of the compartment. Replace the cover,
sliding it forward till it clicks in place.
44
Receiver Out
button
Battery
compartment
cover
Receiver
access

5
OPERATION
ID Setup for Wireless Operation
With the mouse positioned near the receiver,
use a hard, narrow object (such as a pin or
a straightened paper clip) to press both ID
buttons: rst on the receiver; then, within
10 seconds, on the underside of the
mouse. Hold each button in for a full
second. The receiver light will ash rapidly
for a few seconds, then remain lit, indicating that the connection between
the receiver and the mouse has been made and the mouse is ready for
wireless operation.
Wired Operation
Where the use of wireless devices is restricted; or when the mouse is
low on power — the mouse can be operated as a wired device. With
the retractable cable connected to the front of the mouse, connect the
other end to the computer. If only a PS/2 port is available, an adapter
can be used.
Remember to place the receiver back in the mouse so you don’t lose it.
Battery Charging
While using the mouse, if the red Low Battery
LED ashes, re-charge or change the
batteries. To re-charge, connect the mouse
to the computer with a USB cable. The mouse
can be used while the batteries charge; a full
charge requires 8-10 hours. To stop charging,
unplug the cable. NOTE: The actual charging time depends on the
degree of the discharge.
5
ID connect
ID
buttons
Charge
connector
Low battery
Low
Battery
LED
Charge connector

Operating Tips
• Operate the mouse within 1.5 m (5 ft.) of the receiver.
• Place the mouse on a white or light-colored surface for optimal
performance. Remove the batteries if the mouse will not be used for
an extended period of time or if you transport the device outdoors.
• The mouse automatically enters a sleep mode after a period of inactivity
to save power. Press any key or scroll to wake it.
• To disconnect power to the mouse, press and hold the ID button on the
underside of the mouse for 3 seconds. To restore power to the mouse,
press the ID button again.
• If the Low Battery LED on the receiver ashes when the mouse is moved,
change or re-charge the batteries immediately.
• The optical mouse will not work freely on a smooth desk, glass or any
reective surface or 3D mouse pad.
• Remember to store the receiver in the mouse when it’s not being used.
SPECIFICATIONS
66
Standards and Certications
• USB 1.1, FCC, CE, WEEE
General
• USB 1.1 receiver
• RF 27 MHz with 256 IDs
• Recharge time: 8-10 hours to
fully charge
• Mouse: optical, 800 dpi resolution
• Automatic power save/power off
mode
• LED indicator: Activity
• Controls: right and left mouse
with scroll wheel
• Material: ABS plastic
• Compatible with Windows 2000/
XP/Vista
Dimensions
• Mouse: optical, 800 dpi; 9.5 x 5.4
x 3.5 cm (3.75 x 2.125 x 1.4 in.);
76.5 g (2.7 oz.)
• USB receiver: 27 MHz (256 IDs);
5.5 x 1.5 x 1 cm (2.2 x 0.6 x 0.4
in.); 5.7 g (0.2 oz.)
• USB retractable cable: A-type
male to mini-B-type male, 76 cm
(30 in.)
Environmental
• Operational temperature: 0 – 45°C
• Storage temperature: -40 – 45°C
• Working humidity: <85%
• Electrical: 5 V <30 mA
6

www.manhattan-products.com
MANHATTAN®offers a complete line
of PC Components, Peripherals, Cables and Accessories.
Ask your local computer dealer for more information
or visit us online at
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.