Manhattan 150491 User manual

SUPERSPEED USB
PCI EXPRESS CARD
USER
MANUAL
Model 150491
MAN-150491-UM-0110-01

2
Thank you for purchasing the MANHATTAN®SuperSpeed USB PCI
Express Card, Model 150491.
Connect data storage, digital media and other USB peripheral devices
to your PCI Express-enabled computer by adding a pair of hot-swappable,
internal ports — each supporting data transfer rates of up to 5 Gbps.
Installation of the card is quick and simple, so you’ll soon be enjoying
the benets of these additional features:
• Fits PCI Express x1, x2, x4, x8 and x16 lane buses
• 4-pin power connector for receiving extra power from system
• Plug and Play installation; hot-swappable; Windows compatible
• Lifetime Warranty
System Requirements
• Windows XP/Vista/7 32- and 64-bit
• PCI Express-enabled system with an available PCI Express slot
• CD-ROM drive
HARDWARE INSTALLATION
1. Turn off your computer.
2. Unplug the power cord and
remove your computer’s cover.
3. Remove the slot bracket from
an available PCIe slot.
4. Carefully align the card’s bus
connector with the selected
PCIe slot on the motherboard.
Push the board down rmly.
5. Replace the slot bracket’s
holding screw to secure the
card.
6. Replace the
computer
cover and
reconnect the power cord. 2 USB 3.0 ports
4-pin power
connector

DRIVER INSTALLATION
1. Insert the included driver CD into the computer’s CD-ROM drive.
2. On the computer desktop, go to Start, then Run.
3. Enter “D:\PCIe\NEC uPD720200\Setup.exe” (where “D” or another
appropriate letter corresponds to your CD-ROM drive designation),
then click “OK.”
4. Follow the on-screen instructions to complete the installation.
Verifying Driver Installation
1. On the desktop, go to Start, then Control Panel, then System
Properties.
2. Click the “Device Manager” tab and conrm that “NEC Electronics USB
3.0 Host Controller” and “NEC Electronics USB 3.0 Root Hub” are both
listed under “Universal Serial Bus controllers,” indicating the driver has
been installed properly.
Standards and Certications
• CE; FCC; USB 1.0, 1.1, 2.0 & 3.0; PCI Express Specication, rev. 2.0
Ports
• 2 SuperSpeed USB external ports, type A
• Data transfer rates of 5 Gbps, 480 Mbps, 12 Mbps and 1.5 Mbps
• NEC USB controller
Bus
• PCI Express x1
• Bus speed 5 Gbps (bi-directional)
Package Contents
• SuperSpeed USB PCI Express Card, x1 lane
• User manual and CD driver
3 3
SPECIFICATIONS

Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
www.manhattan-products.com
MANHATTAN®offers a complete line
of PC Components, Peripherals, Cables and Accessories.
Ask your local computer dealer for more information
or visit us online at