Manhattan 160414 User manual

MAN-160414-UM-1106-04
Serial PCi
exPreSS Card
USer MaNUal
MODEL 160414

2
Thank you for purchasing the MANHATTAN®Serial PCI Express Card, Model 160414.
Compliant with PCI Express 1.0a specifications, this card can be configured to achieve baud
rates of up to 115,200 bps and takes advantage of PCI Express data transfer speeds of up to
2.5 Gbps.
hardware iNStallatioN
1. Turn off the power to the computer system.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the
motherboard. Push the board down firmly.
5. Connect the system power source to the board’s power connector.
6. Replace the slot bracket’s holding screw to secure the card.
7. Replace the computer cover and reconnect the power cord.
driver iNStallatioN
NOTE: Make sure the board is installed before proceeding with driver installation.

3
For Windows 2000
1. On the Found New Hardware Wizard screen,
click "Next."
2. Select "Search for a suitable driver for my
device (recommended)," and click "Next."
3. Check "Specify a location," uncheck the other
boxes, then click "Next."
4. Insert the driver CD, enter "D:\PCIe\1S\2000"
in the "Copy manufacturer’s files from" field,
then click "OK." (If needed, change "D:" to
match your CD-ROM drive designation.)
5. Click "Next," then "Finish."
6. Restart Windows to complete the installation.

4
For Windows XP
1. On the Found New Hardware Wizard screen, select
"Install from a list or specific location (Advanced),"
then click "Next."
2. Insert the driver CD, check "Include this location in the
search" and enter "D:\PCIe\1S\XP" in the blank field,
uncheck the other box, then click "OK." (If needed,
change "D:" to match your CD-ROM drive
designation.)
3. If the Hardware Installation window pops up, click
"Continue Anyway," then click "Finish." The driver has
been thoroughly tested for stability and compatibility.
4. Repeat steps 1-3 one more time.
5. Restart Windows to complete the installation.

5
For Windows Server 2003
1. On the Found New Hardware Wizard screen,
select "Install from a list or specific location
(Advanced)," then click "Next."
2. Insert the driver CD, check "Include this location in
the search" and enter "D:\PCIe\1S\2003" in the
blank field, uncheck the other box, then click "OK."
(If needed, change "D:" to match your CD-ROM
drive designation.)
3. If the Hardware Installation window pops up, click
"Continue Anyway," then click "Finish." The driver has
been thoroughly tested for stability and compatibility.
4. Repeat steps 1-3 one more time.
5. Restart Windows to complete the installation.

6
Verifying Windows 2000/XP/Server 2003 Installation
1. Right click on "My Computer," then click "Manage."
Click on "Device Manager."
2. Click on "+" (plus sign) in front of "Ports (COM & LPT)."
A single "NetMos PCI Serial Port ..." option should
be displayed.
3. Double-click on "Multifunction adapters."
"NetMos 9835 PCI Multi-I/O Controller" should
be displayed.
Changing the COM Port Address
Some serial devices need a specific COM port in order to work. If your device works properly,
don’t change this setting. Otherwise, follow these steps for Windows 2000/XP/Server 2003.
1. From the Device Manager window, double-click "Ports (COM & LPT)," then double-click the
"NetMos PCI Serial Port" you want to change.
2. Click on the Settings tab and click "Advanced."
3. Click the down arrow that is next to the "COM Port Number" box; select a COM port that is
not in use, then click "OK."
4. Click "OK," then close Device Manager to save the changes.

7
SPeCifiCatioNS
Port Specifications
• One DB9 male port
• Programmable baud rate of up to
(115,200 bps)
• MosChip serial controller
• Single 3.3 V operation
• 16-byte transmit/receive FIFO
• Even, odd, no parity or force parity options
• 5-, 6-, 7- and 8-bit characters selection
• Compatible with 16C550
• Legacy PCI addressing support
Bus Specifications
• PCI Express x1
• Texas Instruments chipset
• Bus speed: 2.5 Gbps
• Fully compliant to PCI Express
specifications 1.0a
System Requirements
• Windows 2000/XP/Server 2003/Vista
• PCI Express-enabled system with an
available PCI Express slot
• CD-ROM drive
Package Contents
• Serial PCI Express Card, x1 lane
• User manual and driver CD

www.manhattan-products.com
Are you completely satisfied with this product?
Please contact your MANHATTAN®dealer with comments or questions.
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.