Mapmyindia MAPPLS Navisor User manual

Retrofit Smart
Helmet Kit
User Manual

Introduction
Start Using your device
Installation
How to use Navisor with Mappls App
LED Pattern
Battery Safety 24 6.2.
Support
Subscription Renewal
Warranty Card
Safety and Usage
In the Box
Overview
Features
Appearance
Front view 4
Bottom view 4
Back View
Charge the Navisor
Charging Status
Power On and Off
Normal Turn
Slight Turn
Sharp Turns
U-Turn 9
Destination
1
1
1
2
2
3
3
3
4
4
4
5
5
10
17
17
18
19
20
20
21
21
22
23
24

The User agrees and acknowledges that the 2Wheeler Navigation product/aid called the
Navisor and NavAudio is for aiding the user with directions on roads. The User
understands and further acknowledges that there is always a possibility of new roads
being constructed/ turns being closed/opened which may not be captured/updated in
the product. The Company (C.E. Info Systems Limited) strongly advises you to direct all
your attention to the ride, drive or transport, and to follow the local traffic regulations and
safety requirements and does not provide any warranty with respect to the exactness of
the product. The Company and its group companies disclaims all liability with respect to
any loss of property, injury and death caused to the User or anyone else by use of these
products.

INTRODUCTION
In the Box
Overview
Navisor, when used with NavAudio, is a complete smart helmet kit that turns your
existing full-face helmet into a smart helmet. Navisor offers real-time visual cues for
navigation that are easy to understand, keeping you aware of your upcoming turns or
deviations without having to take your eyes off the road. With Navisor, you can keep your
focus on the road, without needing to check your phone mounted on a stand.
Navisor provides intuitive LED light cues with different colors and animations that are
easy to interpret, even if you have reduced visual acuity. This makes it easier to
understand navigational data, such as turn types and distances, without adding to the
cognitive load required to drive safely. This makes the experience of navigation more
convenient and safer for you.
Navisor also includes an ambient light sensor that adjusts the display brightness
automatically according to the surrounding light levels. This ensures that the display is
easy to see in all lighting conditions.
In addition to its other safety features, Navisor also includes an integrated accelerometer
to detect accidents or crashes. In the event of an accident, Navisor will send an alert to
the Mappls app, which will then notify your emergency contacts. This feature adds an
extra layer of safety, ensuring that you are never alone in case of an emergency.
1
Mounting Bracket
SMART HELMET KIT
Mounting Bracket 2 unit
Navisor 1 unit

Features
n
n
n
n
n
n
Peripheral Cueing Navigation System
Long Battery Life – Atleast 12hrs of continuous use
Integrated Crash/SOS sensor
Designed for IP65 and Atleast 2 meters drop resistant
Visible in all lighting conditions – Direct Sun, Rain, Fog, Dusty
Compatible with most full-face helmets – easy installation
Tech Specifications
n
n
n
n
n
n
Works on Bluetooth low energy mode (BLE 5)
350mAh battery
3 axis mems crash sensor
Light sensor for auto adjust of brightness
Charging time : 2hrs
Standby time: 200hrs
2

Appearance
n
n
n
Front view
Bottom view
Back view
A. Light Sensor
B. Brightness (-)
C. Power On/ Brightness
AB C
A
A. Type-C Charging port
A. Left Mounting Bracket B. Right Mounting Bracket
A
B
3
A B

START USING YOUR DEVICE
Charge the Navisor
n
n
n
n
Your device is powered by a rechargeable Li-Ion battery.
Insert the USB cable into the USB charger port.
Connect the USB cable to the charging head, and then plug the charging head into a
standard outlet.
Insert the Type C end of the cable in the navisor.
Charging Status
n
n
n
n
n
Blinking Blue LED: Charging
When you connect Navisor to a power source using the provided USB cable, the LED
on the device will start blinking blue, indicating that it is currently charging.
Blinking Green LED: Charged.
Once the battery of Navisor is fully charged, the LED on the device will change from
blinking blue to blinking green.
The blinking green LED indicates that the device is now fully charged and ready for
use.
State LED
Charging Blinking Blue
LED
Charged Solid Green
LED
4
L
L

Power On and Off
n
n
Turn on press the power on/ brightness (+) for 1 click.
Turn off press & hold the brightness (-) & power on/brightness
+ simultaneously for 1 second.
Brightness Control
nTo increase brightness – press and hold power ON/brightness (+) button until adjusted
to convenient brightness
nTo decrease brightness – press and hold brightness (-) button until adjusted to
convenient brightness
INSTALLATION
Here is a detailed guide for installing Navisor onto a helmet,
including step-by-step instructions:
Step 1: Clean the surface of the helmet.
Use a clean cloth or tissue to wipe the area of the helmet
where you want to attach the mount. Make sure there is no dirt,
dust, or oil on the surface.
5
R
L
Mount

6
Step 2: Peel the sticker as shown.
Locate the sticker on the back of the mount and peel off the protective layer.

7
Step 3: Align the mount by using the guided sticker as shown.Use the Guided
sticker in the front of the mount to align it properly on the surface of the helmet.
Make sure it is centered and level.
Please Ignore the etched L&R symbol on the mount. Kindly refer to the stickers
(Right) and (Left) for mounting navisor on the helmets
123

8
ŸPress the mounts on to the
surface of the helmet tightly and
it is advised to leave it
undisturbed for 24hrs before
mounting the Navisor.
ŸThis is to ensure that there is
proper adherence to the helmet.
ŸPeel off the guided sticker after
after mounting
Step 4: Stick the mount to the rim of
the helmet as shown below.Press the
mount
firmly onto the surface of the helmet,
using the guided sticker as a reference
point.

9
Step 5: Slide in the Navisor onto the mount.
Locate the slot on the back of Navisor and slide it onto the mount attached
to the helmet. Push it in until you hear a click, indicating that it is securely
attached.
Step 6: Connect with Mappls app.
Download and install the Mappls app on your smartphone. Follow the instructions
in the app to connect Navisor with your phone via Bluetooth. Once connected, you
can start using Navisor for navigation, communication, and other features.
Remember to follow the installation instructions carefully to ensure that Navisor is
attached securely to your helmet and functions properly.

How to use Navisor with Mappls App
For Navisor Device
n
n
Download Mappls App from the Google Play Store or Apple’s App store, or scan QR to
open the app link for download
Open the App
Click on the
hamburger menu
10
Sign Up to
the account
Enter valid
Email ID / Mobile no.

11
Scroll up the
Quick Access
menu and click
on Connect
Click on
Yes
Tap on
Settings Enable Navisor

12
Click on Turn on
bluetooth of your
device (follow the
on screen
instructions)
Click to
Continue
Click on
Continue
Add
emergency
contact or click
on skip

13
Navisor
Connected
Click on
Connect
Click on
allow

Click on the
hamburger menu
How to Use Navisor along with Mappls App
nOpen the App
14
Tap on
Settings Enable Navisor
Click on
Yes

15
Click on Start
Navigation
Click on Navisor
icon on the
navigation screen
Enter start and
end location.
Click on
the Direction
button on
home screen.

Click on
Connect
Click on
allow
Navigation
screen
16
Click on
allow

Signal Left LED’s Right LED'sDistance
LED PATTERN
Normal Turn
nLED color: Red
Left Turn
Right Turn 250 meters
150 meters
50 meters
Immediately
(blinking Red
light)
17
250 meters
150 meters
50 meters
Immediately
(blinking Red
light)
LR
LR
LR
LR
LR
R
L
R
L
R
L
R
L
R
L
All LED blinking
All LED blinking