Mapmyindia MAPPLS NavAudio User manual

USER MANUAL

INDEX
Introduction 1
In the Box 1
Features 1
Appearance 2
Start using your device 2
Charge the NavAudio 2
Charging Status 3
Basic Operations 3
Power On and Off 3
Pairing with Phone 4
Volume Control 4
Installation 5
Functionality 5
Phone Calls 5
Call Answer 5
Call Reject 5
Call End 6
Last call redial 6
Voice Assistant 6
Priority 7
Music Control 7
Play/Pause 7
Music Switch 7
Mappls App 8
Other 8
Battery Safety 8
Warranty Terms 9
Safety and Usage Information 12

The User agrees and acknowledges that the 2Wheeler Navigation product/aid
called the Navisor and NavAudio is for aiding the user with directions on roads.
The User understands and further acknowledges that there is always a possibili-
ty of new roads being constructed/ turns being closed/opened which may not be
captured/updated in the product. The Company (C.E. Info Systems Limited)
strongly advises you to direct all your attention to the ride, drive or transport, and
to follow the local traffic regulations and safety requirements and does not pro-
vide any warranty with respect to the exactness of the product. The Company
and its group companies disclaims all liability with respect to any loss of
property, injury and death caused to the User or anyone else by use of these
products.

NavAudio 1 unit Cable *1 Unit
QSG
Velcro patch * 2 Unit QSG
INTRODUCTION
In the box
Features
 Works on Bluetooth low energy mode (BLE 5)
 Works upto 120km per hour speed
 Bluetooth calling (Auto receives after 6 rings or you can reject
by pressing the button)
 Listen to music /calls
 Long press : Support Google assistant or Siri
 20 Hours battery back up
 Charging time 2.5hrs
 Wind noise cancellation
 Stereo sound
 250hrs standby
 400mAh battery
1

Speaker
Volume+
Indicator
Charging
Power ON/ Phone Button
Volume-
Appearance
START USING YOUR DEVICE
Charge the NavAudio
Your device is powered by a rechargeable Li-Ion battery.
 Insert the USB cable into the USB charger port.
 Connect the USB cable to the charging head, and then plug the charging
head into a standard outlet.
 Insert the Micro USB end of the cable in the NavAudio.
2

Low Battery Indication Charging Indication
Charging
Full
Red light always on
Red light off
Red light quickly flashes twice
“ Low battery”
1 Sec
Charging Status
Basic Operations
Power On and Off
Power On Bluetooth On
3
ON
“Ding~Ding~Ding~Ding~Ding~”
Standby
 Blue light flashes slow
OFF
Press the <Volumes -> &
<Power button> simultaneously
for 1 sec
 Indicator light off
Long-press for
1 s
1 Sec 5 Sec
Simultaneously
press for 5s



Turn on the “Bluetooh” of the
cellphone, find and pair the
NavAudio
Bluetooth
NavAudio
5 Sec
2
1
Pairing Successful
 Blue light slow flashes twice
“pairing Successful”
“connected”
Press to minimize the volume Press to maximize the volume
Current battery status will
Show on the cellphone
(The cellphone must
support HFP)
Pairing with Phone
Volume Control
4
To pair/connect Navaudio with
your phone:
1. Press and hold the Power
Button for 5 seconds to enable
Bluetooth or enter pairing
mode. When the blue and red
LEDs blink continuously,
NavAudio will be discoverable
by your mobile phone's Blue
tooth
2. Turn on "Bluetooth" on your
phone and connect it to
NavAudio.
3.If no device is paired within
2 minutes, pairing mode will
be disabled, and the device
will enter standby mode.
While in standby mode,
Navaudio will not be discover
able by other phones.
Red and Blue light flash
quickly “Pairing”

Call Answer
Auto answering within 8s
if no other action is taken
Long press for 2 second
2 Sec
2. Adjust the mic position for a better fit
1. Stick the NavAudio on both sides
inside the helmet
FUNCTIONALITY
or
Call Reject
Phone Calls
INSTALLATION
5

Call End
Last call redial
Voice Assistant
1 Sec
Voice
assistant
Turn on the voice assistant
12
Press the <Phone button> for 1s
Press to End call
Press to redial last call
6

Priority
Music Control
Music InterruptCall Music RestoreHang up
2 Sec 2 Sec
Play/Pause
Music Switch
Press to Play/Pause
the music
To play previous track,
press for 2 second
To play next track,
press for 2 second
7