Marantz VQ2400 Owner's manual

VQ2400 HD Compatible Video Up Converter with TBC
*All specifications, dimensions and weights are subject to change without notice. D&M Holdings, Marantz, Marantz America, Inc. or any of its subsidiaries will not assume any liability for errors within this document.
Marantz America, Inc. • 1100 Maplewood Drive • Itasca, IL 60143 • Phone [phone] • Fax [phone] • www.marantz.com ©2005 Marantz America, Inc.
This groundbreaking product was designed to make every home theater a lot less complicated. To use, simply connect the Composite
Video, S-Video, and/or Component Video outputs from your existing receiver/preamp to the corresponding inputs on the VQ2400
and then connect one cable from the Component Video output on the VQ2400 to your display device. Power it with the included
12 volt power supply and the VQ2400 will seamlessly “upconvert” all the signals to component level, eliminating the need to run mul-
tiple cables from your equipment rack to the video display. From then on, you will never need to switch inputs on your display
device again. It’s that easy and it is compatible with virtually any Receiver/Pre Amp available, regardless of brand. The VQ2400 also
incorporates Time Based Correction for compatibility with fixed pixel devices such as plasma displays and DLP projectors.
SPECS.qxp 1/28/05 11:18 AM Page 55