Marantz SR5006 User manual

SR5006 Home Theater Receiver
SR5006 Home Theater Receiver
AUDIO/VIDEO PROCESSING
ANALOG DEVICES: SHARC 32-bit Processor
 Dolby: True HD/Digital Plus&EX/Pro Logic IIz, IIx
Dolby: II/Virtual Speaker/Headphone
DTS: HD Master&High Res. Audio/ES/96/24/
DTS: Discrete&Matrix6.1/Neo:6/Express
DTS Neural Surround
Multi Ch Stereo
Audyssey MultEQ-XT Auto Calibration w/ MIC
Audyssey Dynamic EQ / Dynamic Volume
9 Band EQ, -20dB - +6dB
Independent Crossover Setting for each speaker
Lip-sync (digital audio delay) 0-200 msec
Volume Control Setting: Limit, Power On Vol
Mute Level, Display type (dB or 0-99)
Component/Composite to HDMI Trans-coding
OSD output over HDMI
The SR5006 delivers the kind of convenience, network capability and power that’s sure to exceed your home entertainment needs for years to come.
A newly styled front panel, complete with “star and circle” display, recalls the classic components that have made Marantz an audiophile favorite for
decades. AirPlay allows you to stream music wirelessly; from your iPhone, iPod Touch and iPad; over your home network, and you’re sure to enjoy
streaming audio content from online music services like Pandora, Rhapsody and Napster as well as from your own shared media files. Access thou-
sands of Internet radio stations from all over the world or dial in the ultimate set up with Audyssey MultEQ-XT room correction, Dynamic EQ and
Dynamic Volume. Two audio zones help deliver seamless audio content all around the house while a Set Up Wizard insures you’ll be up and running
in no time.
USER CONFIGURABLE FEATURES
Input Level Adjust
Input Assign (Component In/Digital In)
Input Rename
Input Skip
On Screen Display (TEXT)
Display Status Info.
Software Upgradable
AUDIO/VIDEO CONNECTIONS
7.1 Channels
AM/FM Tuner
56Tuner Presets: Group A-G: each 8 channels
6 RCA Analog inputs (incl. Front RCA)
2 Optical, 2 Coaxial SPDIF Digital Inputs
6/1 HDMI ver.1.4a In/Out
CEC (Control)
ARC (Audio Return Channel)
HDMI In Stand By
Auto Lip Sync.
Deep Color, x.v.Color
Pass through in Standby mode
2/1 Component In / Out
5/1 Composite In / Out
Front USB input for digital iPod Connection
7.1 Channel Input
Headphone Out
ADVANCED CONNECTIONS
iPhone/iPod Digital Connection
Bluetooth Wireless Audio Transmission Capability
External IR Receiver
Assignable HDMI / Component inputs
Marantz D-Bus(RC-5), Remote In / Out, RS232
Assignable 2.2 Channel Preamp-Out
Speaker A or B Switching
MARANTZ AUDIO ADVANTAGE
All-discrete, 100w x 7 Class AB Output Stage
High Current Linear Power Supply
EI Core Power Transformer
Pure Direct / Source Direct
M-DAX (Marantz Dynamic Audio eXpander)
Front Bi-Amp Drive Capability (Speaker C)
Fully Discrete Amplification
192kHz/24-bit Audio DACS
Two audio zones
NETWORK FEATURES
 Ethernet port
 WEB Interface
 IP-based control, system backup/restore
DLNA1.5 certified
Stream audio and photos from all connected PC’s
vTuner Internet Radio w/ 14000 pre-loaded stations
Stream audio and photos from Internet:
Rhapsody
Pandora
Napster
Flicker
App Control

©2011 Marantz America, LLC · www.marantz.com
All specifications, dimensions and weights are subject to change without notice.
D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors
Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document.
SR5006 Home Theater Receiver
Audio Section
• Power amplifier
Rated output: Front:
100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Center:
100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround:
100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround back:
100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Output connectors: 6 – 8 Ω(SPEAKER A+B: 8 Ω)
• Analog
Input sensitivity/Input impedance: 200 mV/47 kΩ
Frequency response: 10 Hz – 100 kHz — +1, –3 dB
(DIRECT mode)
S/N: 100 dB (IHF–A weighted, DIRECT mode)
Video Section
• Standard video connectors
Input/output level and impedance: 1 Vp-p, 75 Ω
Frequency response: 5 Hz – 10 MHz — 0, –3 dB
• Color component video connector
Input/output level and impedance: Y (brightness) signal
— 1 Vp-p, 75 Ω
PB / CB signal — 0.7 Vp-p, 75 Ω
PR / CR signal — 0.7 Vp-p, 75 Ω
Frequency response: 5 Hz – 60 MHz — 0, –3 dB
Tuner Section [FM] [AM]
(Note: μV at 75 Ω, 0 dBf = 1 x 10–15 W)
Receiving Range: 87.5 MHz – 107.9 MHz 520 kHz – 1710
kHz
Usable Sensitivity: 1.2 μV (12.8 dBf) 18 μV
50 dB Quieting Sensitivity: MONO 2.8 μV (20.2 dBf)
S/N: MONO 70 dB (IHF–A weighted, DIRECT mode)
STEREO 67 dB (IHF–A weighted, DIRECT mode)
Total harmonic Distortion (at 1 kHz): MONO 0.7 %
STEREO 1.0 %
General
Power supply: AC 120 V, 60 Hz
Power consumption: 650 W
0.2 W (Standby)
3 W (CEC standby)
For purposes of improvement, specifications and design are
subject to change without notice.