Marathon TI030018 Series User manual

100-Hour Keypad Digital Countdown Timer
with Interval Countdown, Count-up and Clock Feature
Model TI030018 Series
USER MANUAL
SECTION 1
FEATURES
MODE SELECTIONS
The unit has four function modes.
• CLOCK mode
• INTERVAL TIMER mode
• COUNT UP mode
• TIMER mode
SECTION 2
UNIT APPEARANCE
MANUAL ENGLISH
1
AC
C
AC
C
SECTION 3
BUZZER SOUND VOLUME CONTROL
The selector switch located at the bottom of the unit
can be used to select OFF/LOW/HIGH volume level.
TIMER MODE
Slide the MODE selector switch to the TIMER position.
TO USE THE TIMER
1. Set the timer using [to ] keys.
2. Press the key to start or pause the timer
countdown. Once the countdown completes, the
alarm will beep and the timer will start to count up
automatically; the icon will appear on the
 LCDandtheLEDindicatorwillash.
3. When countdown is stopped or paused, press the
key to reset the display to zero.
MEMORIES
Up to four memories are provided to store your timer
setting, using the [ to ] keys
1. Set the timer using [ to ] keys.
2. Press and hold the key for two seconds to
save the time currently displayed in . Repeat
the process to set the other memories.
3. To recall the preset times, simply press the desired
memory button.
SECTION 4
COUNT UP MODE
Slide the MODE selector switch to the COUNT UP position.
1. Press the key to start or pause the count up.
2. When the count up is stopped or paused, press the
key to reset the display to zero.
1LCD
2MODE Selector switch
3Key
4LED indicator
5
60 to 9 Keys
7
8Battery compartment
9Buzzer Sound level
selector switch
4
6
7
8
9
1
2
3
AC
C
Key
to
timer memory keys
5
Sound level
selector switch
Lo
Hi

5. Pressthekeytoconrmthesettingand
return to CLOCK mode.
NOTE:
— To cancel the setting, press and hold the key
for two seconds.
— The unit will also edit the setting mode
automatically in 60 seconds.
SECTION 7
BATTERY REPLACEMENT
If there is no display on the LCD or if the display
becomes dim, remove the battery door located under
the unit, then replace the old batteries with two new AA
batteries, inserting them according to the polarity marks.
SECTION 8
PRECAUTIONS
— Do not subject the unit to excessive force or shock.
— Avoid contact with any corrosive materials.
—Donotdisposeofthisunitinareasitmayexplode.
— Do not recharge the batteries and do not dispose
 oftheminare.
— Attention! Please dispose of used batteries and
main unit in an ecologically safe manner.
—Technicalspecicationsandusermanualcontents
for this product are subject to change without notice.
SECTION 9
SPECIFICATIONS
Operating temperature
range:
-5 °C to 50 °C (23 °F
to 140 °F)
Main power: AA batteries x 2
Max timer setting value: 99 hr, 99 min, 99 sec
Max count up: 99 hr, 59 min, 59 sec
Dimension: 116 mm (W) x 108 mm
(L) x 55.5 mm (H)
SECTION 10
WARRANTY
Marathon Watch Company warrants this item to be free from defects in material and
workmanship under normal use in accordance with care and usage instructions for
2 years from date of purchase from an authorized retailer. This warranty excludes
damage from misuse, abuse or any irregular application. Return the item to us
properly packaged accompanied with the original bill of sale. Please contact
CustomerServiceat1-800-822-4329toobtaintheshippingaddress.Ifweconrma
defect, we will replace it with the same item or one of similar value and return it to you
at no charge.
Marathon Watch Company Ltd.
www.MarathonWatch.com
Designed in Canada
Made in China
MANUAL ENGLISH
SECTION 5
INTERVAL TIMER MODE
The interval timer allows the times stored in the four
memories to count down, one after the other, sequentially.
Slide the MODE switch to the INTERVAL TIMER position.
TO SET THE TIMER
1. Set the timer using the [ to ] keys, then press
and hold the key for two seconds to save the
currently displayed value in the memory.
2. Repeat the above process to set the other timers
for to .
TO USE THE TIMER
1. Press the key to start the timer. The timer
will begin counting down from to M4
sequentially. At the end of each interval, the timer
will beep twice and the next interval will begin.
When it reaches the end of , the timer will beep
for 60 seconds.
2. To use the auto-loop function, press and hold the
key for two seconds to activate the function.
The icon will appear on the LCD.
3. When the countdown is stopped or paused, press
the key to clear the display.
NOTE:
A minimum of one memory interval must be set in
order to operate the interval timer. For example, set
to 12:34 and to to 00:00.
SECTION 6
CLOCK MODE AND SETTING
1. Press and hold the key for two seconds to
enter the clock setting mode.
2. Press the key to select the 12-hour or the 24-
hour format, then press the key to continue.
3. If the 12-hour format is selected, press the key to
select AM or PM, then press the key to continue.
4. Press the to keys to set the hour and minutes.
For example, to set the time at 9:30, press , ,
and .
2
AC
C