Mark-10 E Series User manual

Series E
ERGONOMICS FORCE GAUGES
Quick Start Guide
grips, software, and more.
Mark-10 Corporation
11 Dixon Avenue
Copiague, NY 11726
888-MARK-TEN
Tel: [phone]
Fax: [phone]
www.mark-10.com
[email protected]
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Thank you!
Thank you for purchasing a Mark-10 Series E Digital Force
Gauge and accessories. We are condent that you will get many
years of service from this product. Series E gauges may be used
in a variety of push and pull testing application. Please read
through this Quick Start Guide and the complete User’s Guide be-
fore using the gauge.
Series E Ergonomics Force Gauges
IMPORTANT SAFETY CONSIDERATIONS
Force gauges are sensitive instruments that must be treated with care. Please
review the yellow safety information card included in the box, as well as the safety
information in the User’s Guide prior to operating the gauge.
LIST OF INCLUDED ITEMS:
Quick Start Guide
Qty. Part No. Description
1 12-1049 Carrying case
1AC1030 / AC1031 /
AC1032 / AC1035 AC adapter w/US, EU, UK, or AUS prong
1 08-1026 Rechargeable NiMH battery
(inside gauge)
1 - Certicate of calibration
1 09-1165 USB cable
2
3
OPTIONAL ITEMS:
A number of attachments are available, as pictured below. They may be pur-
chased individually or as kits.
-
-
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Thank you!
POWER
Quick Start Guide
Press the button to power on the gauge. Press and hold to power o󰀨. The
gauge may be powered either by the internal rechargeable battery or an AC adapter/
charger. The battery will last approximately 7 hours with the backlight turned on,
and 24 hours with the backlight turned o󰀨 before recharging is necessary.
Qty. Part No.
1 12-1049
1AC1030 / AC1031 /
AC1032 / AC1035
1 08-1026
1 -
1 09-1165
2
3
OPTIONAL ITEMS:
chased individually or as kits.
INSTALLING ATTACHMENTS
Attachments are mounted to the gauge’s receptacle via
the Click-LockTM mechanism. Line up the attachment with
the receptacle, and press in until a click occurs. The at-
tachment may be inserted in 90- or 180-degree orienta-
tions. To release the attachment, pull back on the lever in
the rear of the housing, as shown at left.
LITERATURE & SOFTWARE DOWNLOADS
1. User’s guides (PDF)
Provided for all Mark-10 instruments. Locate the user’s guide for this product
and read it thoroughly before use.
2. USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter.
Required for communication with a PC. Follow the installation instructions
provided in the user’s guide.
3. MESUR®family of software – see below.
INSTALLING MESUR®SOFTWARE
Mark-10 o󰀨ers three data collection applications:
MESUR®Lite
Free basic data acquisition application, for data tabulation and exporting to
Excel. Compatible with gauges only, not test stands.
MESUR®gauge / MESUR®gauge Plus
Data tabulation, graphing, analysis, and reporting, with user-congurable start
and stop triggers and other tools. Compatible with gauges and test stands for
load vs. time or load vs. travel. MESUR®gauge Plus adds test stand motion
control coordination. Both applications can be evaluated for 90 days.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. Minimum monitor
resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB
communication is required, install the Mark-10 USB driver.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]