Mars MA-CQ26-1X User manual

Installation Layout
Multi Band Omni Antenna
Antenna
MA-CQ26-1X(T) / MA-CQ27-1X(T)
Rev. 2

MA-WOLTE-DP1R, MA-CQ27-1XR, MA-CQ26-1XRT
MOUNTING INSTRUCTIONS
1. Fasten Mount item 7 to Antenna item 6 using
items 8, 9, 10, 11 as shown on Fig 1.
Close screws item 8 with Nuts item 11 at a torque of
19 - 21 kg·cm (1.9-2.1 Nm; 16.5-18.2 lb·inch).
2. Put Mount item 7 onto Pole item 1as shown on
Fig 2a or Fig 2b suitable for customer needs.
Fig .3. Two Options Of The Antenna Mounting
ITEM QTY DESCRIPTION
1 1 Pole (not supplied)
2 2 U-Bolt M8x85x57x40
3 4 Flat Washer M8 DIN 125 / ISO 7090
4 4 Lock Washer M8 DIN 127
5 4 Hex Nut M8 DIN 934 / ISO 4032
6 1 Antenna
7 1 MOUNT
8 4 8-32 UNC x 0.5 Phillips Flat Head Screw
9 4 Type Plain Washer #8
10 4 Helical Spring Lock Washer #8
11 4 Hex Nut #8
Parts List
Fig. 2b
Fig. 2a
6
6
1
1
3 4 52
3 4 52
7
7
9 10 118
6
7
3. Insert U-bolts item 2 into holes in Mount item 7 so
U-bolts cover the Pole.
4. Fasten Antenna with Mount on the Pole using
items 2, 3, 4, 5
5. Adjust desirable direction & height for Antenna.
Close U-bolts item 2 with Nuts item 5 at a torque of
184-204 kg·cm (18-20 Nm; 159-177 lb·inch).
Fig. 1