Owner’s Manual - 20” Plastic Circulating Floor Fan
2
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
Read Rules for Safe Operation and Instructions Carefully.
WARNING, RULES FOR SAFE OPERATION,
USER SERVICING INSTRUCTIONS, CLEANING:
1. Toreducetheriskofreorelectricalshock,donotusethisfanwithanysolid-statespeedcontroldevice.
2. Ifthepowercordisdamaged,itisstronglyrecommendedtorequestaspecialisttohandle.
3. Thisappliancehasapolarizedplug(onebladeiswiderthantheother).Toreducetheriskofelectricshock,
thisplugisintendedtotinapolarizedoutletonlyoneway.Iftheplugdoesnottfullyintheoutlet,reverse
theplug.Ifitstilldoesnott,contactaqualiedelectrician.Donotattempttodefeatthissafetyfeature.
4. Donotleavethefanrunningunattended..
RULES FOR SAFE OPERATION
1. Neverinsertngers,pencils,oranyotherobjectthroughthegrillewhenfanisrunning.
2. Disconnectfanwhenmovingfromonelocationtoanother.
3. Besurefanisonastablesurfacewhenoperatingtoavoidoverturning.
4. Donotusefaninwindow.Rainmaycreateelectricalhazard.
5.Ensurethatthefanisswitchedofromthesupplymainsbeforeremovingthegrille.Therulesaboutcord
andplugasbelow:
1).Thisproductemploysoverloadprotection(fuse).Ablownfuseindicatesanoverloadorshort-circuit
situation.Ifthefuseblows,unplugtheproductfromtheoutlet.Replacethefuseaspertheuser
servicinginstructions(followproductmarkingforproperfuserating)andchecktheproducts.Ifthe
replacementfuseblows,ashort-circuitmaybepresentandtheproductshouldbediscardedorreturned
toanauthorizedservicefacilityforexaminationand/orrepair.
2).Donotoperateanyfanwithadamagedcordorplug.Discardfanorreturntoanauthorizedservice
facilityforexaminationand/orrepair.
3)Donotruncordundercarpeting.Donotcovercordwiththrowrugs,runners,orsimilarcoverings.Do
notroutecordunderfurnitureorappliances.Arrangecordawayfromtracareaandwhereitwillnotbe
trippedover.
INSTALLATION INSTRUCTIONS
Name of components
Up-down
Pushtheguardslightlytoadjustacom-
fortableposition.
Warning:Whenadjustingtheangle,do
notputyourhandsinthegrilletoavoid
gettinginjured.
OWNER’S MANUAL
MODEL: FB50-17H
READ AND SAVE THESE INSTRUCTIONS
Version 1.0 2017
Attention: Pictures in the IM are for reference only. 3
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with mild soap and damp cloth or sponge.
Thoroughly remove soap film with clean water.
3. Be sure not to get water or other liquids of the motor.
4. Avoid getting water or other liquids inside the motor housing.
USER SERVICING INSTRUCTIONS
a) Grasp plug and remove from the receptacle or other
outlet device.Do not unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on
top of attachment plug towards blades.
c) Remove fuse carefully. Push the fuse from the other
side or turn fuseholder over to remove fuse.
d) Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
e) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse)
that should not be removed. Discard product if the attachment plug is damaged.
Notice:
1. When you replace fuse, please don’t operate suddenly or overexert, or else the
product will be damage or cause accident.
2. When you feel it hard to be operated, please make sure you have got the right
way.
Wall-mounted�
Fix the base on the wall to adjust a confortable position.When the fan is installed on the wall,
the power cord must be located between the fan head and the fan base .
Warming: When adjusting the angle and start using , make sure the fan is fixed on the wall .
2
U
p-down
Push the guard slightly to adjust a
confortable position .
Warming:
When adjusting the angle, do not put your
hands in the
grille
to avoid get injured.
INSTALLATION INSTRUCTIONS
Name of components
1
Read Rules for Safe Operation and Instructions Carefully.
CAUTION
WARNING
RULES FOR SAFE OPERATION
1. Never insert fingers, pencils, or any other objects through the grille when
fan is running.
3. Disconnect fan when moving grilles for cleaning.
2. Disconnect fan when moving from one location to another.
4. Be sure fan is on a stable surface when operating to avoid overturning.
5. DO NOT use fan in window.Rain may create electrical hazard.
The rules about cord and plug as below:
(1) This product employs overload protection (fuse). A blown fuse indicates an
overload or short-circuit situation. If the fuse blows, unplug the product from
the outlet. Replace the fuse as per the user servicing instructions (follow
product marking for proper fuse rating) and check the products. If the
replacement fuse blows, a short-circuit may be present and the product should
be discarded or returned to an authorized service facility for examination and/
or repair.
(2) Do not operate any fan with a damaged cord or plug. Discard fan or return to
an authorized service facility for examination and/or repair.
(3) Do not run cord under carpeting. Do not cover cord with throw rugs, runners,
or similar coverings. Do not route cord under furniture or appliances. Arrange
cord away from traffic area and where it will not be tripped over.
6.
1.To reduce the risk of fire or electrical shock, do not use this fan with any solid-
state speed control device.
2. If the power cord is damaged, it is strongly recommended to request a
specialist to handle.
3. This appliance has a polarized plug ( one blade is wider than the other ).To
reduce the risk of electric shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug .If it
still does not fit, contact a qualified electrician. Do not attempt to defeat this
safety feature.
4. Do not leave the fan running unattended.
Important safety instructions
Screw mounting distance
OWNER’S MANUAL
MODEL: FB50-17H
READ AND SAVE THESE INSTRUCTIONS
Version 1.0 2017
Attention: Pictures in the IM are for reference only. 3
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with mild soap and damp cloth or sponge.
Thoroughly remove soap film with clean water.
3. Be sure not to get water or other liquids of the motor.
4. Avoid getting water or other liquids inside the motor housing.
USER SERVICING INSTRUCTIONS
a) Grasp plug and remove from the receptacle or other
outlet device.Do not unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on
top of attachment plug towards blades.
c) Remove fuse carefully. Push the fuse from the other
side or turn fuseholder over to remove fuse.
d) Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
e) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse)
that should not be removed. Discard product if the attachment plug is damaged.
Notice:
1. When you replace fuse, please don’t operate suddenly or overexert, or else the
product will be damage or cause accident.
2. When you feel it hard to be operated, please make sure you have got the right
way.
Wall-mounted�
Fix the base on the wall to adjust a confortable position.When the fan is installed on the wall,
the power cord must be located between the fan head and the fan base .
Warming: When adjusting the angle and start using , make sure the fan is fixed on the wall .
2
U
p-down
Push the guard slightly to adjust a
confortable position .
Warming:
When adjusting the angle, do not put your
hands in the
grille
to avoid get injured.
INSTALLATION INSTRUCTIONS
Name of components
1
Read Rules for Safe Operation and Instructions Carefully.
CAUTION
WARNING
RULES FOR SAFE OPERATION
1. Never insert fingers, pencils, or any other objects through the grille when
fan is running.
3. Disconnect fan when moving grilles for cleaning.
2. Disconnect fan when moving from one location to another.
4. Be sure fan is on a stable surface when operating to avoid overturning.
5. DO NOT use fan in window.Rain may create electrical hazard.
The rules about cord and plug as below:
(1) This product employs overload protection (fuse). A blown fuse indicates an
overload or short-circuit situation. If the fuse blows, unplug the product from
the outlet. Replace the fuse as per the user servicing instructions (follow
product marking for proper fuse rating) and check the products. If the
replacement fuse blows, a short-circuit may be present and the product should
be discarded or returned to an authorized service facility for examination and/
or repair.
(2) Do not operate any fan with a damaged cord or plug. Discard fan or return to
an authorized service facility for examination and/or repair.
(3) Do not run cord under carpeting. Do not cover cord with throw rugs, runners,
or similar coverings. Do not route cord under furniture or appliances. Arrange
cord away from traffic area and where it will not be tripped over.
6.
1.To reduce the risk of fire or electrical shock, do not use this fan with any solid-
state speed control device.
2. If the power cord is damaged, it is strongly recommended to request a
specialist to handle.
3. This appliance has a polarized plug ( one blade is wider than the other ).To
reduce the risk of electric shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug .If it
still does not fit, contact a qualified electrician. Do not attempt to defeat this
safety feature.
4. Do not leave the fan running unattended.
Important safety instructions
Screw mounting distance
