Mars Comfort-Aire FP-3030DTO-MBL User manual

OWNER’S MANUAL
517.787.2100 • www.marsdelivers.com
READ AND SAVE THESE INSTRUCTIONS
Attention: Pictures in this manual are for reference only.
Model
30” Metal Oscillating Pedestal Fan
FP-3030DTO-MBL

Owner’s Manual - 30” Metal Oscillating Pedestal Fan
2
SAFETY INFORMATION
WARNING
1. Read and save these instructions. Do not operate fan unless you have read these instructions.
2. Unplug the fan before moving it or performing maintenance. Do not touch the fan when your hands are wet.
3. Thosewhoarenotqualiedelectriciansshouldnotdisassemble,repairorrebuildthefan.
4. Unplug the fan when it is not in use.
5. DO NOT unplug the fan by pulling the power cord. Unplug by holding the plug and pulling.
6. DONOTusethefanwhenthereisdamagetothepowercordorplug.Ifthesupplycordisdamaged,ithas
tobereplacedbythemanufacturer,itsserviceagentorsimilarlyqualiedpersons.
7. DO NOT use the fan with extension cord.
8. DONOTusethefanclosetores.
9. DO NOT insert your hand or other objects into the grille or the movable parts.
10.Toreducetheriskofreorelectricshock,donotusethisfanwithanysolid-statespeedcontroldevice.
11. DONOTusethisfanoutdoors,thisfanisdesignedforindooruseonly.
CAUTION
1. Unplug the fan from the socket and clean it with a soft cloth.
2. DO NOT immerse the fan.
3. Verify all fan guards are securely in place before operating the fan.
4. Thisfanisnotintendedforusebypeople(includingchildren)withreducedphysical,sensoryormental
capabilities or lack of experience and knowledge unless they have been given supervision or instruction
concerning use of the fan by a person responsible for their safety. Supervise children to ensure they do not
play with the fan.
CARE AND MAINTENANCE
Unplug the appliance before cleaning. Don’t use any water for cleaning metal surfaces. Slightly moisten a cloth
andthenwipeo󰀨thesurfacesofthefan.Inordertoremovethedustfromthegrill,useavacuumcleaneror
removethefrontgrillbyremovingthesecuringscrewontheedgeofthegrillwithascrewdriver.Aftercleaning,
remountthegrill.Afterdoingthis,fastenthesecuringscrewontheedgeofthegrill.
ASSEMBLY INSTRUCTIONS
Removevescrews
from the base. Save
them for Step 2.
1.
Insert the spring into the support
post as shown in the picture.
3.
Attach support post
to base by tightening
backthevescrews
from Step 1.
2.
Remove three screws on
black ring around extension
pipe. Save them for Step 5.
4.
145X210MM
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
extension tube and save them to step 7.
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
SFSI-750SW
For additional information on the product or replacement parts, call
our Customer Service Department at Mars’ tel no.
145X210MM
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
extension tube and save them to step 7.
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
SFSI-750SW
For additional information on the product or replacement parts, call
our Customer Service Department at Mars’ tel no.
145X210MM
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
extension tube and save them to step 7.
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
SFSI-750SW
For additional information on the product or replacement parts, call
our Customer Service Department at Mars’ tel no.
145X210MM
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
extension tube and save them to step 7.
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
SFSI-750SW
For additional information on the product or replacement parts, call
our Customer Service Department at Mars’ tel no.

Owner’s Manual - 30” Metal Oscillating Pedestal Fan
3
Owner’s Manual - 30” Metal Oscillating Pedestal Fan
3
ASSEMBLY INSTRUCTIONS
OPERATION INSTRUCTIONS
,efasanonafehtecalP.1 surface where it can
not fall or be pulled by the cord.
2. To adjust air up and down: Tilt the fan head
o the desired angle.
. deepsde r i sedr o fhc t i wsy r a t o reh t n r uT. 3
1=Low, 2=Med., 3=High
4. Always turn and unplug the fan after using.
pipe was secured onto the support post tightly.
5.
Insert extension pipe into support post, black ring
onto support post by tightening back three screws
from Step 4. Adjust extension pipe to your desired
height and secure it by tightening back the height
adjustment knob.
WARNING: To avoid injury, never put your head over
the extension pipe during or before the extension
Assemble fan blade onto motor
shaft by tightening screw and
washer. Make sure screw is
tightened.
10.
Remove the hexagon bolts, bolt
sheaths and washers, hexagon head
square strength bolts, hexagon
lace nuts from the top of the extension
tube and save them for step 7.
6.
Assemble front guard to
rear guard by attaching both
guards together with clips on
the rim of front guard.
11.
Install the fan head on the exten-
sion tube by fastening and hexagonal
bolts, bolt jackets, washers, hexagonal
square bolts and hexagonal
lace nuts from step 6.
7.
Secure the assembly of front
guard and rear guard by tight-
ening a screw and nut at the
bottom of the guards.
12.
OSCILLATION INSTRUCTIONS
Set rear guard in proper
position and attach it to
fan head by securing back
the nuts and washers from
Step 8.
9.
Remove four sets of hexagonal
nuts, spring washers and
washers from fan head. Save
them Step 9.
8.
To make the fan head oscillate: loosen the screw and
move to position A and tighten.
NOTE: the screw is preset at position A at the factory.
To stop the fan head oscillating: loosen the screw and
move to position B and tighten
Tighten it back.
CAUTION: Switch the fan before adjusting fan
head oscillation.
Position A-
To make the fan
head oscillate
Position B-
To stop the fan
head oscillate
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
extension tube and save them to step 7.
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
extension tube and save them to step 7.
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
extension tube and save them to step 7.
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
extension tube and save them to step 7.
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
extension tube and save them to step 7.
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
For additional information on the product or replacement parts, call
our Customer Service Department at Mars’ tel no.

:HOOZRUWK$YH-DFNVRQ0,3KZZZKHDWFRQWUROOHUFRP


'XHWRRQJRLQJSURGXFWLPSURYHPHQWVVSHFLILFDWLRQVDQGGLPHQVLRQVDUH
VXEMHFWWRFKDQJHDQGFRUUHFWLRQZLWKRXWQRWLFHRULQFXUULQJREOLJDWLRQV'HWHUPLQLQJWKH
DSSOLFDWLRQDQGVXLWDELOLW\IRUXVHRIDQ\SURGXFWLVWKHUHVSRQVLELOLW\RIWKHLQVWDOOHU
$GGLWLRQDOO\WKHLQVWDOOHULVUHVSRQVLEOHIRUYHULI\LQJGLPHQVLRQDOGDWDRQWKHDFWXDOSURGXFW
SULRUWREHJLQQLQJDQ\LQVWDOODWLRQSUHSDUDWLRQV
,QFHQWLYHDQGUHEDWHSURJUDPVKDYHSUHFLVHUHTXLUHPHQWVDVWRSURGXFWSHUIRUPDQFH
DQGFHUWLILFDWLRQ$OOSURGXFWVPHHWDSSOLFDEOHUHJXODWLRQVLQHIIHFWRQGDWHRIPDQXIDFWXUH
KRZHYHUFHUWLILFDWLRQVDUHQRWQHFHVVDULO\JUDQWHGIRUWKHOLIHRIDSURGXFW
7KHUHIRUHLWLVWKHUHVSRQVLELOLW\RIWKHDSSOLFDQWWRGHWHUPLQHZKHWKHUDVSHFLILF
PRGHOTXDOLILHVIRUWKHVHLQFHQWLYHUHEDWHSURJUDPV
3/2020
Fans_3-2020
Congratulations on purchasing your new HVAC equipment.
It’s been designed for long life and reliable service,
and is backed by one of the strongest warranties in the
industry. Your item automatically qualies for the warranty
coverage listed below, providing you keep your proof of
purchase (receipt) for the equipment and meet the warranty
conditions.
LIMITED ONE (1) YEAR EXPRESS WARRANTY
Comfort-Aire warrants item to be free from defects in
workmanship and materials for normal use and maintenance for
one (1) year from the date of purchase by the original consumer.
This Express Limited Warranty applies only when operated per
Comfort-Aire installation and operating instructions for normal
use.
EXCEPTIONS
The Limited Express Warranty does not cover normal
maintenance Comfort-Aire recommends that regular inspection/
maintenance be performed at least once a season.
CONDITIONS FOR WARRANTY COVERAGE
Item must be operated according to Comfort-Aire operating
instructions included with the unit and cannot have been
subjectedtoaccident,alteration,improperrepair,neglector
misuse,oranactofGod(suchasaood)
• Serial numbers and/or rating plate have not been altered or
removed
• Performance cannot be impaired by use of any product
notauthorizedbyComfort-Aire,orbyanyadjustmentsor
adaptations to components
• Damage has not been a result of inadequate wiring or
voltageconditions,useduringbrown-outconditions,or
circuit interruptions
DURATION OF WARRANTY & REGISTRATION
The warranty begins on the date of purchase by the original
consumer. The consumer must retain a receipt as proof of
warrantyperiod.Withoutthisproof,theexpresswarrantybegins
on the date of shipment from the factory.
REMEDY PROVIDED BY THE LIMITED
EXPRESS WARRANTY
The sole remedy under the Limited Warranty is replacement of
the defective unit. Labor to diagnose and replace the defective
unit is not covered by this Limited Express Warranty. If for any
reason the replacement product is no longer available during
thewarrantyperiod,Comfort-Aireshallhavetherighttoallowa
credit in the amount of the current suggested retail price of the
product instead of providing replacement.
LIMITED EXPRESS WARRANTY
LIMITATION OF LIABILITY
1. There are no other express or implied warranties. Comfort-Aire
makes no warranty of merchantability. We do not warrant that
the item is suitable for any particular purpose or can be
used in buildings or rooms of any particular size or condition
exceptasspecicallyprovidedinthisdocument.Thereareno
otherwarranties,expressorimplied,whichextendbeyondthe
description in this document.
2. All warranties implied by law are limited in duration to the one-
term of the warranty. We will not be liable for any consequential
or incidental damages caused by any defect in this item.
3. Thiswarrantygivesyouspeciclegalrightsandyoumayalso
have other rights which vary from state to state. Some states do
not allow limitation on how long an implied warranty lasts or do
not allow the exclusion or limitation of incidental or consequential
damages,sotheabovelimitationsorexclusionsmaynotapply
to you.
4. No warranties are made for items sold outside the continental
UnitedStatesandCanada.Yourdistributorornalsellermay
provide a warranty on items sold outside these areas.
5. Comfort-Aire will not be liable for damages if our performance
regarding warranty resolution is delayed by events beyond our
controlincludingaccident,alteration,abuse,war,government
restrictions,strikes,re,ood,orotheractsofGod.
HOW TO SUBMIT A WARRANTY CLAIM
Ifyouhaveawarrantyclaim,notifyyouinstallerordealerpromptly.
KEEP THIS INFORMATION AS
A RECORD OF YOUR PURCHASE
PRODUCT IDENTIFICATION
___________________________________________________
Model Number
___________________________________________________
Date of Purchase
Remember to retain your bill of sale as proof of warranty period.