
LEGAL
NOTICE
Design
of
device
and
packaging are intellectual
properties ofZound Industries lnternatlonal
AB.
C All
Rights Reserved
MARSHALL, Marshall Amps, theirrespective logos,
"Marshall' and "Marshall" trade dressare trademarks and
intellectual property ofMarshall Amplification Pie
and
may
not be used without permission. Permission granted to
Zound Industries International AB.
The Bluetooth®wordmark and logos are registered
trademarks owned bythe Bluetooth SIG,
Inc.
and any
use
ofsuch marks byZound Industries
1s
under
license.
All othertrademarks are the property
of
their respective
owners and may not
be
used without permission.
Formorelegal information related to this product
and
to its usein your specific region, and for more detailed
Information about Zound Industriesand partner &
license information. please visit thewebsite:
www.
marshallheadphones.com. The user is recommended to
visit the website regularly forup-to-date information.
Zound Industries lnternallonal AB, Centralplan
15,
111
20
Stockholm, Sweden.
FCC
STATEMENT
FCC
ID
is located under theright ear
cushion.
To
remove, gentlypart the earcushion from the headphone,
starting from one
side.
WARNING: Any changes ormodifications
to
this device
not expressly approved by the partyresponsible for
compliance could void the user'sauthonty to operate
the equipment.
This devicecomplies with part 15ofthe FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful Interference, and
(2)
this device mustaccept anyinterference received, Includ-
ing interference that maycause undesiredoperatlon. This
equipmentcomplies with the
FCC
radiation exposure
limitssetforth for an uncontrolled environment. This
device must notbeco-located oroperated
in
conjunction
with anyotherantenna ortransmitter.
This equipment has been tested
and
found to comply with
the limits for a Class Bdigital device, pursuant to part
15
of
the FCC Rules. These limitsare designed to provide
reasonable protection againstharmful interference
in
a residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
1f
not
installedand used
in
accordance with the instructions,
maycause harmful interference to radio communications.
However, there Is
no
guarantee that interference will not
occurin a particularinstallation.
If
this equipment does
cause harmful interference to radio
or
television recep-
tion, which can bedetermined
by
turning the equipment
off
and
on, the useris encouraged to
try
to correct the
interference byone ormoreofthe following measures:
• Reorient orrelocate the receiving antenna.
• Increasethe separation between the equipment
and receiver.
• Connect the equipment into
an
outleton acircuit
differentfrom that towhich
the
receiver Is connected.
• Consult the dealeror
an
experienced radio/TV
technician forhelp.
U.S.
responsible party, contact information:
Zound Industries USA,
Inc.
260 W 39th Street Suite 1101, New York, NY10018, USA
Telephone number· 646-214-1003
IFETEL
La
operac16n
deeste equIpo esta sujeta a las
siguientes dos condiciones (1) es posible qua este
equipo o
d1sposltlvo
nocause interferencia perjudicial
y (2) este equIpo o
dispos1trvo
debeaceptar cualquier
interferencia, incluyendo
la
quepueda causar
su
operaci6n nodeseada.
ANATEL
Esta produto
estA
homologado pela ANATEL, de
acordo comosprocedimentos regulamentados pela
Resolu~o n•. 242/2000 e atende aos
requ1sitos
tocmcos apllcados. Esteequipamento nao
tern
direIto
a
prote~o
contra
interferAncia prejudicial e nao
podecausarinterferAncia
em
slstemas devidamente
autorizados.
..
Para maIores lnforma¢es, consulte o site daANATEL
-www.anatel.gov
br.
IC
STATEMENT
IC ID is located underthe right ear cushion. To
remove, gentlypart the earcushion
from
the head-
phone, starting
from
one side.
Les numeros d'identification IC
ID
estsituesjuste sous
le coussinet d'orelllettedroit. Pour l'enlever, maIntenez
le coussinetd'oreillette
et
tournez dans lesens inverse
des aiguilles d'une montre.
Thisdevice complies with Industry Canada licence-ex-
empt
RSS
standard(s). Operation is subject to the
following two
condiUons:
(1) this device maynot cause
interference,
and
(2)
this devicemust acceptany
interference, including interference that maycause
undesired operation
of
the device.
Cet appareil estconforme a
la
norme
RSS
sans
licence d'lndustrieCanada. Son fonctionnement
estsoumis auxdeux conditions suivantes: (1) cet
appareil nedoitpas provoquer d'interference
et
(2)
cetappareil doit supporterles interferences, ycompris
Jes
interferences susceptibles
de
provoquer
un
fonctionnement inattendu.
This Class Bdigital device complies with Canadian
ICES-003.
Cetappareil numerique de classe B estconforrne ala
norme ICES-003
au
Canada.
CAN
ICES-003 (B)/NMB-003(6)
~•••a~z~••~•n•.••~*-~~-~
••~m«~~•m~•~••·
m*••••~•&
ttz~tt&••·
~••~•••z~m~•~•m~~~&T•*~~
«:••~•T•~•~.•~~~m.tta•¥•T
allf1i•••ifm.
•~*~••.•~••••~•~~•z••••
-•~••M•
■
•~~~*~B-~I•.
~-&
■
•m
·••Mtt•••Hlz
T
•.
R4
UK
CR
Compiles
with
IMDA
Standards
DA106056
CE
~R[