Marshall Amplification MODE II User manual

USER MANUAL

02
ENGLISH
GETTING STARTED
1. Open the charging case.
2. Push and hold the brass pairing button until the earbud LEDs
pulse blue.
3. Select MODE II from your sound device’s Bluetooth®list.
4. Download the Marshall Bluetooth app and follow the in-app
instructions to complete the setup.
TOUCH CONTROLS
Touch the left or right earbud to control Mode II.
LEFT EARBUD
• 1 touch to toggle Transparency mode on/off
• 2 touches to activate your phone’s native voice assistant
RIGHT EARBUD
• 1 touch to play/pause
• 2 touches to skip forward
• 3 touches to skip backward
LEFT OR RIGHT EARBUD
• 1 touch to receive/end a call
• 2 touches to reject a call
CHARGING THE EARBUDS
Put the earbuds back in the case to charge them. The earbud LEDs blink white
while charging and steady white when full. The earbuds can be completely recharged
4 times from a fully charged case.
CHARGING THE CASE
Use a wireless charger or plug the case into a USB power source to charge it.
The front LED lights up while charging, from red through orange to green (0–100%).
1. Place the charging case with its back flat against the wireless charging pad.
2. Make sure that the front LED lights up to indicate that the case is charging.
3. Once the LED light has turned to a solid green light the charging case is fully
charged.
AUDIO ADJUSTMENTS
Mode II comes with 4 sizes of ear tips and getting the best fit is important in ensuring
you enjoy the best audio experience. Take the time to find the ear tips that best fit
your ear. The ear tips should fit snugly in your ear but still feel comfortable. It is not
uncommon to use different sizes for left and right.
When you have selected well-fitting ear tips, fine-tune your EQ settings from the
Marshall Bluetooth app to create your custom sound.
PAIRING A NEW DEVICE
Mode II remembers up to 4 previously paired devices and can reconnect with them
automatically when in range. Follow the instructions below to pair Mode II with an
additional device.
1. Place your earbuds in the charging case.
2. Push and hold the brass pairing button for 2 seconds, until the earbud LEDs turn
blinking blue.
3. Select MODE II from your sound device’s Bluetooth list.
CLEANING YOUR MODE II
Earbuds come in close contact with your skin often and sometimes for long periods of
time. This will over time cause build-up of dirt and grease that can affect performance
and may cause skin irritation. Clean your earbuds regularly to keep them fresh and
make them last longer.
Unplug any cables before cleaning the case. Make sure everything is completely dry
before using the earbuds, putting the earbuds back in the case, or plugging in a USB
charger.
Remove the silicone ear tips from the earbuds and clean them separately. Use a
disinfectant wipe or a lint-free cloth, slightly damp with 70% isopropyl alcohol or 75%
ethyl alcohol to gently clean the ear tips, the exterior surfaces of the earbuds and the
case. Avoid getting moisture in any openings or in the speaker mesh. Carefully clean
those areas with a dry and soft brush, or a cotton swab.
• Do not use any sharp objects.
• Do not use compressed air.
• Do not use products containing bleach or hydrogen peroxide.
• Do not submerge the earbuds in any cleaning agents.
RESETTING THE EARBUDS
If your earbuds become erratic or unresponsive, perform a hardware reset:
1. Place the earbuds in the case.
2. Push and hold the brass paring button for 10 seconds, until the LEDs flash 3
times, to reset the headphones.
If the problem persists, perform a factory reset.
Note: This will delete all user settings and after the factory reset, the headphones
need to be set up again.
1. Place the earbuds in the case.
2. Push and hold the brass paring button for 15 seconds, until the LEDs flash 10
times, to reset the headphones to factory settings.

02
ENGLISH
GETTING STARTED
1. Open the charging case.
2. Push and hold the brass pairing button until the earbud LEDs
pulse blue.
3. Select MODE II from your sound device’s Bluetooth®list.
4. Download the Marshall Bluetooth app and follow the in-app
instructions to complete the setup.
TOUCH CONTROLS
Touch the left or right earbud to control Mode II.
LEFT EARBUD
• 1 touch to toggle Transparency mode on/off
• 2 touches to activate your phone’s native voice assistant
RIGHT EARBUD
• 1 touch to play/pause
• 2 touches to skip forward
• 3 touches to skip backward
LEFT OR RIGHT EARBUD
• 1 touch to receive/end a call
• 2 touches to reject a call
CHARGING THE EARBUDS
Put the earbuds back in the case to charge them. The earbud LEDs blink white
while charging and steady white when full. The earbuds can be completely recharged
4 times from a fully charged case.
CHARGING THE CASE
Use a wireless charger or plug the case into a USB power source to charge it.
The front LED lights up while charging, from red through orange to green (0–100%).
1. Place the charging case with its back flat against the wireless charging pad.
2. Make sure that the front LED lights up to indicate that the case is charging.
3. Once the LED light has turned to a solid green light the charging case is fully
charged.
AUDIO ADJUSTMENTS
Mode II comes with 4 sizes of ear tips and getting the best fit is important in ensuring
you enjoy the best audio experience. Take the time to find the ear tips that best fit
your ear. The ear tips should fit snugly in your ear but still feel comfortable. It is not
uncommon to use different sizes for left and right.
When you have selected well-fitting ear tips, fine-tune your EQ settings from the
Marshall Bluetooth app to create your custom sound.
PAIRING A NEW DEVICE
Mode II remembers up to 4 previously paired devices and can reconnect with them
automatically when in range. Follow the instructions below to pair Mode II with an
additional device.
1. Place your earbuds in the charging case.
2. Push and hold the brass pairing button for 2 seconds, until the earbud LEDs turn
blinking blue.
3. Select MODE II from your sound device’s Bluetooth list.
CLEANING YOUR MODE II
Earbuds come in close contact with your skin often and sometimes for long periods of
time. This will over time cause build-up of dirt and grease that can affect performance
and may cause skin irritation. Clean your earbuds regularly to keep them fresh and
make them last longer.
Unplug any cables before cleaning the case. Make sure everything is completely dry
before using the earbuds, putting the earbuds back in the case, or plugging in a USB
charger.
Remove the silicone ear tips from the earbuds and clean them separately. Use a
disinfectant wipe or a lint-free cloth, slightly damp with 70% isopropyl alcohol or 75%
ethyl alcohol to gently clean the ear tips, the exterior surfaces of the earbuds and the
case. Avoid getting moisture in any openings or in the speaker mesh. Carefully clean
those areas with a dry and soft brush, or a cotton swab.
• Do not use any sharp objects.
• Do not use compressed air.
• Do not use products containing bleach or hydrogen peroxide.
• Do not submerge the earbuds in any cleaning agents.
RESETTING THE EARBUDS
If your earbuds become erratic or unresponsive, perform a hardware reset:
1. Place the earbuds in the case.
2. Push and hold the brass paring button for 10 seconds, until the LEDs flash 3
times, to reset the headphones.
If the problem persists, perform a factory reset.
Note: This will delete all user settings and after the factory reset, the headphones
need to be set up again.
1. Place the earbuds in the case.
2. Push and hold the brass paring button for 15 seconds, until the LEDs flash 10
times, to reset the headphones to factory settings.

02
ENGLISH
GETTING STARTED
1. Open the charging case.
2. Push and hold the brass pairing button until the earbud LEDs
pulse blue.
3. Select MODE II from your sound device’s Bluetooth®list.
4. Download the Marshall Bluetooth app and follow the in-app
instructions to complete the setup.
TOUCH CONTROLS
Touch the left or right earbud to control Mode II.
LEFT EARBUD
• 1 touch to toggle Transparency mode on/off
• 2 touches to activate your phone’s native voice assistant
RIGHT EARBUD
• 1 touch to play/pause
• 2 touches to skip forward
• 3 touches to skip backward
LEFT OR RIGHT EARBUD
• 1 touch to receive/end a call
• 2 touches to reject a call
CHARGING THE EARBUDS
Put the earbuds back in the case to charge them. The earbud LEDs blink white
while charging and steady white when full. The earbuds can be completely recharged
4 times from a fully charged case.
CHARGING THE CASE
Use a wireless charger or plug the case into a USB power source to charge it.
The front LED lights up while charging, from red through orange to green (0–100%).
1. Place the charging case with its back flat against the wireless charging pad.
2. Make sure that the front LED lights up to indicate that the case is charging.
3. Once the LED light has turned to a solid green light the charging case is fully
charged.
AUDIO ADJUSTMENTS
Mode II comes with 4 sizes of ear tips and getting the best fit is important in ensuring
you enjoy the best audio experience. Take the time to find the ear tips that best fit
your ear. The ear tips should fit snugly in your ear but still feel comfortable. It is not
uncommon to use different sizes for left and right.
When you have selected well-fitting ear tips, fine-tune your EQ settings from the
Marshall Bluetooth app to create your custom sound.
PAIRING A NEW DEVICE
Mode II remembers up to 4 previously paired devices and can reconnect with them
automatically when in range. Follow the instructions below to pair Mode II with an
additional device.
1. Place your earbuds in the charging case.
2. Push and hold the brass pairing button for 2 seconds, until the earbud LEDs turn
blinking blue.
3. Select MODE II from your sound device’s Bluetooth list.
CLEANING YOUR MODE II
Earbuds come in close contact with your skin often and sometimes for long periods of
time. This will over time cause build-up of dirt and grease that can affect performance
and may cause skin irritation. Clean your earbuds regularly to keep them fresh and
make them last longer.
Unplug any cables before cleaning the case. Make sure everything is completely dry
before using the earbuds, putting the earbuds back in the case, or plugging in a USB
charger.
Remove the silicone ear tips from the earbuds and clean them separately. Use a
disinfectant wipe or a lint-free cloth, slightly damp with 70% isopropyl alcohol or 75%
ethyl alcohol to gently clean the ear tips, the exterior surfaces of the earbuds and the
case. Avoid getting moisture in any openings or in the speaker mesh. Carefully clean
those areas with a dry and soft brush, or a cotton swab.
• Do not use any sharp objects.
• Do not use compressed air.
• Do not use products containing bleach or hydrogen peroxide.
• Do not submerge the earbuds in any cleaning agents.
RESETTING THE EARBUDS
If your earbuds become erratic or unresponsive, perform a hardware reset:
1. Place the earbuds in the case.
2. Push and hold the brass paring button for 10 seconds, until the LEDs flash 3
times, to reset the headphones.
If the problem persists, perform a factory reset.
Note: This will delete all user settings and after the factory reset, the headphones
need to be set up again.
1. Place the earbuds in the case.
2. Push and hold the brass paring button for 15 seconds, until the LEDs flash 10
times, to reset the headphones to factory settings.

02
ENGLISH
GETTING STARTED
1. Open the charging case.
2. Push and hold the brass pairing button until the earbud LEDs
pulse blue.
3. Select MODE II from your sound device’s Bluetooth®list.
4. Download the Marshall Bluetooth app and follow the in-app
instructions to complete the setup.
TOUCH CONTROLS
Touch the left or right earbud to control Mode II.
LEFT EARBUD
• 1 touch to toggle Transparency mode on/off
• 2 touches to activate your phone’s native voice assistant
RIGHT EARBUD
• 1 touch to play/pause
• 2 touches to skip forward
• 3 touches to skip backward
LEFT OR RIGHT EARBUD
• 1 touch to receive/end a call
• 2 touches to reject a call
CHARGING THE EARBUDS
Put the earbuds back in the case to charge them. The earbud LEDs blink white
while charging and steady white when full. The earbuds can be completely recharged
4 times from a fully charged case.
CHARGING THE CASE
Use a wireless charger or plug the case into a USB power source to charge it.
The front LED lights up while charging, from red through orange to green (0–100%).
1. Place the charging case with its back flat against the wireless charging pad.
2. Make sure that the front LED lights up to indicate that the case is charging.
3. Once the LED light has turned to a solid green light the charging case is fully
charged.
AUDIO ADJUSTMENTS
Mode II comes with 4 sizes of ear tips and getting the best fit is important in ensuring
you enjoy the best audio experience. Take the time to find the ear tips that best fit
your ear. The ear tips should fit snugly in your ear but still feel comfortable. It is not
uncommon to use different sizes for left and right.
When you have selected well-fitting ear tips, fine-tune your EQ settings from the
Marshall Bluetooth app to create your custom sound.
PAIRING A NEW DEVICE
Mode II remembers up to 4 previously paired devices and can reconnect with them
automatically when in range. Follow the instructions below to pair Mode II with an
additional device.
1. Place your earbuds in the charging case.
2. Push and hold the brass pairing button for 2 seconds, until the earbud LEDs turn
blinking blue.
3. Select MODE II from your sound device’s Bluetooth list.
CLEANING YOUR MODE II
Earbuds come in close contact with your skin often and sometimes for long periods of
time. This will over time cause build-up of dirt and grease that can affect performance
and may cause skin irritation. Clean your earbuds regularly to keep them fresh and
make them last longer.
Unplug any cables before cleaning the case. Make sure everything is completely dry
before using the earbuds, putting the earbuds back in the case, or plugging in a USB
charger.
Remove the silicone ear tips from the earbuds and clean them separately. Use a
disinfectant wipe or a lint-free cloth, slightly damp with 70% isopropyl alcohol or 75%
ethyl alcohol to gently clean the ear tips, the exterior surfaces of the earbuds and the
case. Avoid getting moisture in any openings or in the speaker mesh. Carefully clean
those areas with a dry and soft brush, or a cotton swab.
• Do not use any sharp objects.
• Do not use compressed air.
• Do not use products containing bleach or hydrogen peroxide.
• Do not submerge the earbuds in any cleaning agents.
RESETTING THE EARBUDS
If your earbuds become erratic or unresponsive, perform a hardware reset:
1. Place the earbuds in the case.
2. Push and hold the brass paring button for 10 seconds, until the LEDs flash 3
times, to reset the headphones.
If the problem persists, perform a factory reset.
Note: This will delete all user settings and after the factory reset, the headphones
need to be set up again.
1. Place the earbuds in the case.
2. Push and hold the brass paring button for 15 seconds, until the LEDs flash 10
times, to reset the headphones to factory settings.