Marshall Amplification CV620-TBI User manual

Broadcast A/V Division
User Manual
CV620-TBI / TWI
Auto Track, Follow and Frame
20x PTZ Camera

CV620-TBI/TWI User Manual
www.marshall-usa.com2 3
Chapter 1 Package Contents..................................................................................3
Chapter 2 Product Overview and Interface...........................................................4
2.1 I/O functions Introduction .............................................................4
2.2 Description of LED indicator.........................................................5
Chapter 3 Instruction for installation.....................................................................6
3.1 Scenario .......................................................................................6
3.2 Camera Size .................................................................................6
3.3 Preparation before installation......................................................7
3.4 Instruction for installation .............................................................7
Chapter 4 Introduction of Remote Control and Setting Menu..........................15
4.1 Remote Control ..........................................................................15
4.2 Setting Menu ..............................................................................16
Chapter 5 Network Function Settings Description ............................................20
5.1 Connecting Camera to Network .................................................20
5.2 Web Page Menu Function Description .......................................22
Chapter 6 DIP Switch Setting ...............................................................................35
6.1 OUTPUT Switch..........................................................................35
6.2 IR SELECT ..................................................................................35
6.3 Camera Address Selector ..........................................................35
6.4 System Switch............................................................................35
Chapter 7 Troubleshooting ...................................................................................36
Chapter 8 Safety Instructions...............................................................................37
Copyright Information................................................................................................38
Table of Contents
Camera Remote
Power Adapter Power Cord
CHAPTER 1: PACKAGE CONTENTS
RS-422 Connector
Metal Plate A Metal Plate B M3 Screws
Silver x 8 / Black x 2

CV620-TBI/TWI User Manual
www.marshall-usa.com4 5
CHAPTER 2: PRODUCT OVERVIEW AND INTERFACE
2.1 I/O Functions Introduction 2.2 Description of LED Indicator
Note: The Tally mode can be enabled via RS-232 command control.
Please download the file for RS-232 Command Set from the Marshall website
10
1
2 3
4 5 6 7 8 9
11 12 13 14
15
16
17

CV620-TBI/TWI User Manual
www.marshall-usa.com6 7
CHAPTER 3: INSTRUCTION FOR INSTALLATION
3.1 Scenario
3.1.1 Applicable distance of CV620-TBI to target: 4~15m, best tracking distance recommended
to be 8m from target to capture.
3.1.2 Mounting height: 2~3m, best height recommended to be 2.4m from target to capture.
Note: To maintain the best tracking performance, avoid posters, screens, monitors and televisions
with images of people in the background.
3.2 Camera Size
• Length x Width x Height: 174 x 187 x 192 mm
• Weight: 2.0 Kg
3.2.1 Dimensions of the bottom of the machine
The camera can be mounted on a 1/4”-20 UNC PTZ tripod deck by using the lock holes on the
bottom of the camera.
3.3 Preparation before installation
Installation and connection of HD camera requires special skills. To install by yourself, please follow
necessary steps, to ensure steady and secure installation of CV620-TBI camera, and pay attention to
safety guidelines to avoid drops or accidental mishaps.
a Survey environment for safe installation. Please do not install the device on an unstable ceiling
or in a place where the device is in danger of falling to avoid any accidents.
a Check whether accessories in the box are complete. Please contact the supplier for any
shortage, and make sure to keep the accessories in the box intact for future use.
a Choose a proper place for installation of camera in advance. Please determine an
installation area according to the following requirements:
• Confirm the position for the object to be captured
• Confirm whether the camera is set at a proper distance from light sources
3.4 Instruction for installation
3.4.1 I would like to install camera on the desk
3.4.1.1 Precautions for installation:
• Please install the machine on a flat desk.
• Do not grab or hold the camera by the head.
• Do not rotate the camera head by hand.
Improper rotation may result in breakdown of the camera gears.

CV620-TBI/TWI User Manual
www.marshall-usa.com8 9
3.4.1.1 Installation Steps
a Adjust DIP switches to the desired settings before installation.
• Refer to Chapter 6 DIP Switch Setting for the relevant descriptions on DIP switches.
a Place the camera on a flat desk directly to ensure the normal vertical and horizontal
operation of the machine.
3.4.2 Installing the camera on the ceiling
3.4. 2.1 Prepare for the Ceiling Mount parts and equipment (included in box)
• Accessories included in the box (metal plates A, B, M3 screw silver x 8, black x 2)
• Screws for locking on ceiling mounted hanger x 4
• Drill, screw driver, ladder
3.4.2.2 Metal Plate Size Diagram
• Metal plate A - machine side
Metal plate A locking screw
Metal plate A machine side

CV620-TBI/TWI User Manual
www.marshall-usa.com10 11
• Metal plate B - ceiling side
Plate B locking bolt Plate B locking screw
M3 threaded hole
M3 threaded hole
M3 threaded hole
Metal plate B ceiling side
3.4.2.3 Precautions for Installation
• Before installation, confirm the orientation of the machine relative to the subjects
to be captured.
• It is recommended that the machine be set at 1.5 meters or more from the subject.
Please choose a distance most appropriate to the zoom settings of camera.
• The machine (including metal plates) is weighed at about 2.5 kg. If it is to be installed on
the ceiling, please use the hanger that has obtained UL security approval to prevent the
machine from breaking loose and falling.
• Please check camera on a regular basis to ensure it is secure and stays secure.
Projector
Computer
1.5 meter
3.4.2.4 Installation Steps
1. Adjust resolution on DIP switch before installing camera
Note: Please refer to Chapter 6 DIP Switch Setting for the relevant
descriptions on DIP switch
2. Fix the plate A on the machine base with 4x M3 silver screws
3. Lock the metal plate B on ceiling mounted hanger
Note: (1) Please use the hanger that has obtained UL security approval
(2)Reserve the hole for the connecting wires
4. Combine the metal plate A and the metal plate B
(1) Push the metal plate A up to the ceiling and then to the right to
latch the metal plate B
(2) And then secure with 2x M3 silver screws and 1x M3 black screw

CV620-TBI/TWI User Manual
www.marshall-usa.com12 13
3.4.2.5 How to Remove
1. Remove the connecting wires from the camera
2. Uninstall the camera together with the ceiling, loosen the
three screws that fix the metal plates A and B and push
to the left to remove the machine
3. Then remove the screws on the hanger and the machine
3.4.3 Connecting Devices
Audio In Output
Microphone
Camera
(serial connection)
Input
Computer/Keyboard/Control Equipment
Anti-theft
lock slot
Power
supply
Remote control
settings
Resolution
settings
Lan port HDMI/3G-SDI output
Router Display
3.4.4 RS-232 connection (up to 7 cameras can be connected)
Note: Only one of RS-422/RS-232 can be selected for control, please refer to 6.4
System Switch, DIP1 setting

CV620-TBI/TWI User Manual
www.marshall-usa.com14 15
3.4.5 RS-232 connection (up to 7 cameras can be connected)
Note: Only one of RS-422/RS-232 can be selected for
control, please refer to 6.4 System Switch, DIP1 setting
CHAPTER 4: REMOTE CONTROL AND SETTINGS
4.1 Remote Control
The functions below are listed alphabetically
Item Description
v w r sv w r s Move the lens
Auto Tracking
• On/Off: Enable/Disable Auto Tracking
• Full: Full body tracking
• Upper: Half body tracking
• Switch: Switch tracking object
Auto Framing • On/Off: Enable/Disable Smart viewfinder
• Trigger: Manual framing correction
Back Light Turn on/off back light compensation
Camera Select Choose camera ID 1 ~ 3
Focus
• Auto: Auto focus
• Manual: Enable Manual Focus
• Far/Near: Adjust the focal length in Manual
Freeze Freeze the screen
Home- Enter Go back to main page/ Execute
Info Status information
L/R Direction Set L/R direction /Normal
Menu Display OSD Menu
Mirror Rotate image (OFF/ Mirror/ Flip/ Rotate
Pan/Tilt Reset Clear the Pan/Tilt Setting
Picture Switch image effect (OFF/ Neg/ B&W)
Power Power Switch
Preset Appoint an ID (0~9) to save the current
position data
Reset Appoint an ID (0~9) to save the current
position data
Zoom-Fast • On/Off: Enable/Disable Auto Tracking
• Full: Full body tracking
Marshall

CV620-TBI/TWI User Manual
www.marshall-usa.com16 17
4.2 Setting Menu
The camera can be mounted on a 1/4”-20 UNC PTZ tripod deck by using the lock holes on the
bottom of the camera.
4.2 Setting Menu
<Remark> Press [Menu] on the remote control to enter the setting menu; the bold underlined values in the
following table are defaults.
1st Level
Major Items 2nd Level Minor Items 3rd Level Adjustment Values Function Descriptions
Exposure
Mode
Full Auto / Shutter Pri / Iris Pri /
Manual / White Board
Exposure mode setting
Exposure Comp. On / Off Turn on/off Exposure Comp.
Exposure Comp.
Level -6~C~4 The value can be adjusted after Exposure
Comp. is activated
Shutter Pri 60/30 mode 50/25 mode Adjustable when the Exposure mode is set
to Shutter Pri
1/10000~1/1
Iris Pri F1.6~F6.3 Adjustable when the Exposure mode is set
to Iris Pri
Manual Gain 0~45dB Adjustable when the Exposure mode is set
to Manual Pri
Manual Speed 60/30 mode 50/25 mode Manually set the shutter
1/10000~1/1
Manual Iris F1.6~F6.3 Manually set the iris
Gain Limit 9~C~45dB Max. limit value of electron gain
Iris Limit F1.6~C~F6.3 Max. limit value of iris
WDR Off / 1 / 2 / 3 / 4 WDR settings
White
Balance
Mode
1. Auto
2. Indoor
3. Outdoor
4. One Push WB
5. ATW
6. Manual
7. Sodium Lamp
8. 3000K
9. 4300K
10. 5000K
11. 6500K
12. 8000K
13. WideAuto
Select the color temperature mode
1. 4000k ~ 7000k
2. 3200k
3. 5800k
4. 1700k ~ 10000k
5. 1700k ~ 10000k
6. Custom
7. 2800k
One Push Trigger ENTER One push trigger
Manual Red 0~ C~128 Adjustable when the white balance mode is
set to Manual
Manual Blue 0~ C~128 Adjustable when the white balance mode is
set to Manual
1st Level
Major Items 2nd Level Minor Items 3rd Level Adjustment Values Function Descriptions
Tracking Mode Auto Tracking / Smart
viewfinder
Picture
Picture effect OFF / Neg / B&W
Sharpness 0~A~14
2D NR Off / 1/ 2 / 3
3D NR Off / Low / Standard / Highest
Image Mode Mode 1 ~ 6 / Self-defined
The user may customize his/her desired
image mode
Image Mode Load Mode 1 ~ 6
Adjustable when the Image mode is set to
Custom. After selected, the corresponding
Image mode parameters will be read and
applied to Custom
Brightness 0~ C~25
Adjustable when the Image mode is set to
Custom
Contrast 0~ C~25
Adjustable when the Image mode is set to
Custom
Saturation 0~ C~25
Adjustable when the Image mode is set to
Custom
Black Level Type 1 ~ 5 / Off
Adjustable when the Image mode is set to
Custom
Gamma 0~ C~3
Adjustable when the
Image mode
is set to
Custom
Skin Tone 0~ C~5
Pan Tilt
Zoom
Pan/Tilt Limit On / Off Turn on/off the angle limit setting
Pan Right Limit 0~170 Limit the right angle
Pan Left Limit -170~0 Limit the left angle
Tilt UP Limit 0~90 Limit the upward angle
Tilt Down Limit -30~0 Limit the downward angle
Pan Flip On / Off After it is activated, the Pan command will be
reverse
Tilt Flip On / Off
After it is activated, the Tilt command will be
reverse
Preset Speed 5 - C- 300 deg/sec
Set the PTZ rotation speed when Preset is
performed
PTZ Speed Comp On / Off
Set the Pan/Tilt moving speed to vary from
the zoom position
Zoom Limit x1~x20 Set the D-zoom limit
D-Effect Mirror OFF / Mirror / Flip / Mirror + Flip Set the mode at which the image is turned
Auto Focus
AF Sensitivity Low / Mid / High
For AF triggering speed, the higher the
speed is, the faster AF is triggered
AF Frame Center Area / All Area
AF frame setting, when Central Area was
set as AF frame, focusing will be on the
center of the screen. When Full Frame was
set as AF frame, focusing will be calculated
based on the full screen
Zoom tracking On / Off
This function can be set in the Manual Focus
(MF) mode
In Manual Focus mode, check whether focus
is enabled during lens zooming

CV620-TBI/TWI User Manual
www.marshall-usa.com18 19
1st Level
Major Items 2nd Level Minor Items 3rd Level Adjustment Values Function Descriptions
PTZ Assist On / Off
This function can only be enabled in the
Manual Focus (MF) mode
When PTZ Assist is enabled and PTZ
control is in operation, the focus will be
triggered. The focus will not be triggered
when the scene changes
SMART AF On / Off
Turn on this function and AF will mainly
focus on the face
Ethernet
DHCP On / Off
Enable/Disable the dynamic host
configuration
IP Address 192.168.100.150 Press [ENTER] to be in modify mode; select
the item to be modified using the up and
down keys, and modify the value using the
left and right keys or the numeric keys.
Subnet mask 255.255.255.0
Gateway 192.168.100.254
Audio
Audio In Line In/ Mic In Set Audio In
Audio Enable On / Off Turn on/off audio output
Audio Volume 0~C~10 Audio Volume Setting
Audio Delay On / Off
When the audio is not synchronized with the
video, enable this function to set the audio
delay time
Audio Delay Time
(ms) -1~-500ms Set audio delay time
Encode Sample Rate
1. 48 KHz(AAC)
2. 44.1 KHz(AAC)
3. 16 KHz(AAC)
4. 16 KHz(G.711)
5. 8 KHz(G.711)
Set the encode type and sample rate
<Remark> SDI supports the audio output of
48 KHz only
System
Prompt On / Off
Turn on/off the prompt information on the
display
IR Receive On / Off
Turn on/off the infrared reception
When it is Off, the remote control will not be
able to control the camera. At this moment,
turn off and then turn on the power to restore
control of the remote control.
Motionless Preset On / Off
When the function is enabled, the screen will
Freeze when Preset is executed. Freeze will
be released after Preset is completed
Tally Lamp On / Off
Select Off and it will not be triggered by
commands to turn on or off
Language English / Chinese
Initial Position Last operation
/ First default
value
Select the camera lens to return to the Last
operated position or the First preset
position after POWER ON
<Remark> First default position = Preset 0
Output Mode
1080p 60/59.94/50/30/29.97/25
1080i 60/59.94/50
720p 60/59.94/50
Choose the output resolution
Control Device Encoder / Controller
Control Device setting,
Controller: for joystick
Encoder: for tracking system
1st Level
Major Items 2nd Level Minor Items 3rd Level Adjustment Values Function Descriptions
Protocol Protocol V/ Pelco D Protocol V=VISCA
Pelco D Address 1 ~255
The Protocol set to Pelco D allows the
camera ID address to be assigned
Factory Reset On / Off Resume the factory default setting
Status Display the current setting status